Re: [PATCH v2 1/2] Input: edt-ft5x06 - Add support for regulator

[Mylene Josserand]

Hello Dmitry,

Le Tue, 23 Jan 2018 09:58:29 -0800,
Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> a Ãcrit :

> On Tue, Jan 23, 2018 at 10:10:55AM +0100, Mylene Josserand wrote:
> > Hello Dimitry,
> > 
> > Thank you for the review!
> > 
> > Le Mon, 22 Jan 2018 09:42:08 -0800,
> > Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> a Ãcrit :
> >   
> > > Hi MylÃne,
> > > 
> > > On Thu, Dec 28, 2017 at 8:33 AM, MylÃne Josserand
> > > <mylene.josserand@xxxxxxxxxxxxxxxxxx> wrote:  
> > > > Add the support of regulator to use it as VCC source.
> > > >
> > > > Signed-off-by: MylÃne Josserand <mylene.josserand@xxxxxxxxxxxxxxxxxx>
> > > > ---
> > > >  .../bindings/input/touchscreen/edt-ft5x06.txt      |  1 +
> > > >  drivers/input/touchscreen/edt-ft5x06.c             | 33 ++++++++++++++++++++++
> > > >  2 files changed, 34 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
> > > > index 025cf8c9324a..48e975b9c1aa 100644
> > > > --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
> > > > +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
> > > > @@ -30,6 +30,7 @@ Required properties:
> > > >  Optional properties:
> > > >   - reset-gpios: GPIO specification for the RESET input
> > > >   - wake-gpios:  GPIO specification for the WAKE input
> > > > + - vcc-supply:  Regulator that supplies the touchscreen
> > > >
> > > >   - pinctrl-names: should be "default"
> > > >   - pinctrl-0:   a phandle pointing to the pin settings for the
> > > > diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
> > > > index c53a3d7239e7..5ee14a25a382 100644
> > > > --- a/drivers/input/touchscreen/edt-ft5x06.c
> > > > +++ b/drivers/input/touchscreen/edt-ft5x06.c
> > > > @@ -39,6 +39,7 @@
> > > >  #include <linux/input/mt.h>
> > > >  #include <linux/input/touchscreen.h>
> > > >  #include <linux/of_device.h>
> > > > +#include <linux/regulator/consumer.h>
> > > >
> > > >  #define WORK_REGISTER_THRESHOLD                0x00
> > > >  #define WORK_REGISTER_REPORT_RATE      0x08
> > > > @@ -91,6 +92,7 @@ struct edt_ft5x06_ts_data {
> > > >         struct touchscreen_properties prop;
> > > >         u16 num_x;
> > > >         u16 num_y;
> > > > +       struct regulator *vcc;
> > > >
> > > >         struct gpio_desc *reset_gpio;
> > > >         struct gpio_desc *wake_gpio;
> > > > @@ -993,6 +995,23 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
> > > >
> > > >         tsdata->max_support_points = chip_data->max_support_points;
> > > >
> > > > +       tsdata->vcc = devm_regulator_get(&client->dev, "vcc");
> > > > +       if (IS_ERR(tsdata->vcc)) {
> > > > +               error = PTR_ERR(tsdata->vcc);
> > > > +               dev_err(&client->dev, "failed to request regulator: %d\n",
> > > > +                       error);
> > > > +               return error;
> > > > +       };    
> > > 
> > > As 0-day pounted out, this semicolon is not needed.  
> > 
> > Yes, thanks, I will fix that in next version.
> >   
> > >   
> > > > +
> > > > +       if (tsdata->vcc) {    
> > > 
> > > You do not need to check for non-NULL here, devm_regulator_get() wil
> > > lnever give you a NULL. If regulator is not defined in DT/board
> > > mappings, then dummy regulator will be provided. You can call
> > > regulator_enable() and regulator_disable() and other regulator APIs
> > > with dummy regulator.  
> > 
> > Okay, thanks for the explanation, I will remove that.
> >   
> > >   
> > > > +               error = regulator_enable(tsdata->vcc);
> > > > +               if (error < 0) {
> > > > +                       dev_err(&client->dev, "failed to enable vcc: %d\n",
> > > > +                               error);
> > > > +                       return error;
> > > > +               }
> > > > +       }
> > > > +
> > > >         tsdata->reset_gpio = devm_gpiod_get_optional(&client->dev,
> > > >                                                      "reset", GPIOD_OUT_HIGH);
> > > >         if (IS_ERR(tsdata->reset_gpio)) {
> > > > @@ -1122,20 +1141,34 @@ static int edt_ft5x06_ts_remove(struct i2c_client *client)
> > > >  static int __maybe_unused edt_ft5x06_ts_suspend(struct device *dev)
> > > >  {
> > > >         struct i2c_client *client = to_i2c_client(dev);
> > > > +       struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
> > > >
> > > >         if (device_may_wakeup(dev))
> > > >                 enable_irq_wake(client->irq);
> > > >
> > > > +       if (tsdata->vcc)    
> > > 
> > > Same here.  
> > 
> > yep
> >   
> > >   
> > > > +               regulator_disable(tsdata->vcc);
> > > > +
> > > >         return 0;
> > > >  }
> > > >
> > > >  static int __maybe_unused edt_ft5x06_ts_resume(struct device *dev)
> > > >  {
> > > >         struct i2c_client *client = to_i2c_client(dev);
> > > > +       struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
> > > > +       int ret;
> > > >
> > > >         if (device_may_wakeup(dev))
> > > >                 disable_irq_wake(client->irq);
> > > >
> > > > +       if (tsdata->vcc) {    
> > > 
> > > And here.  
> > 
> > yep
> >   
> > >   
> > > > +               ret = regulator_enable(tsdata->vcc);
> > > > +               if (ret < 0) {
> > > > +                       dev_err(dev, "failed to enable vcc: %d\n", ret);
> > > > +                       return ret;
> > > > +               }    
> > > 
> > > Since power to the device may have been cut, I think you need to
> > > restore the register settings to whatever it was (factory vs work
> > > mode, threshold, gain and offset registers, etc, etc).  
> > 
> > Okay. Could you tell me how can I do that?  
> 
> If you take a look at edt_ft5x06_work_mode() at the end ther eis code to
> restore parameters. You want to factor it out and apply to the device
> when resuming. You probably also want to see what mode (factory/normal)
> the device was before suspend and restore the previous mode on resume.

Okay, thank you for your help.

About the factory/normal mode to be sure that I understand correctly,
in the resume, I should use something like "edt_ft5x06_debugfs_mode_set"
to check the "tsdata->factory_mode" and call "edt_ft5x06_factory_mode"
or "edt_ft5x06_work_mode", is not it?

As the current suspend/resume code is only enabling/disabling an irq, I
would like to understand exactly the modifications you would like.

> 
> >   
> > >   
> > > > +       }
> > > > +
> > > >         return 0;
> > > >  }
> > > >
> > > > --
> > > > 2.11.0
> > > >    
> > > 
> > > Thanks.
> > >   
> > 
> > About your V2's review, you suggested to add support for wake/reset in
> > suspend/resume (that I forgot in this version). I wanted to add it but
> > with my board, I can't test suspend/resume. What should I do about
> > that?  
> 
> See if Simon Budig <simon.budig@xxxxxxxxxxxxxxxxx> can help us here.

Thank you, I contacted Simon (added him in CC) and unfortunately, he
doesn't have a setup with working suspend/resume so he can't help me
on that.
My patches are ready (except for factory/normal mode, see above) but as
I can't test suspend/resume, I prefer not to send them without testing
it..

> 
> > 
> > If I send a V3 in next few days, do you think you will have time to
> > merge it for v4.16?  
> 
> It all depends on the patch shape...

Sure I understand.

Best regards,

-- 
MylÃne Josserand, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com