Re: [PATCH] drm/stm: dsi: Add 1.31 version support
From: Benjamin Gaignard
Date: Tue Jan 30 2018 - 05:52:51 EST
2018-01-22 17:46 GMT+01:00 Philippe Cornu <philippe.cornu@xxxxxx>:
> Add support for the stm dsi phy/wrapper version 1.31.
> Only lane capabilities need to be modified.
>
> Signed-off-by: Philippe Cornu <philippe.cornu@xxxxxx>
Applied on drm-misc-next.
Regards,
Benjamin
> ---
> drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 39 +++++++++++++++++++++++++++--------
> 1 file changed, 30 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> index 0ba8635d738a..a514b593f37c 100644
> --- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> +++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> @@ -14,7 +14,14 @@
> #include <drm/bridge/dw_mipi_dsi.h>
> #include <video/mipi_display.h>
>
> -/* DSI wrapper register & bit definitions */
> +#define HWVER_130 0x31333000 /* IP version 1.30 */
> +#define HWVER_131 0x31333100 /* IP version 1.31 */
> +
> +/* DSI digital registers & bit definitions */
> +#define DSI_VERSION 0x00
> +#define VERSION GENMASK(31, 8)
> +
> +/* DSI wrapper registers & bit definitions */
> /* Note: registers are named as in the Reference Manual */
> #define DSI_WCFGR 0x0400 /* Wrapper ConFiGuration Reg */
> #define WCFGR_DSIM BIT(0) /* DSI Mode */
> @@ -66,6 +73,9 @@ struct dw_mipi_dsi_stm {
> void __iomem *base;
> struct clk *pllref_clk;
> struct dw_mipi_dsi *dsi;
> + u32 hw_version;
> + int lane_min_kbps;
> + int lane_max_kbps;
> };
>
> static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val)
> @@ -122,7 +132,8 @@ static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
> return DIV_ROUND_CLOSEST(clkin_khz * ndiv, divisor);
> }
>
> -static int dsi_pll_get_params(int clkin_khz, int clkout_khz,
> +static int dsi_pll_get_params(struct dw_mipi_dsi_stm *dsi,
> + int clkin_khz, int clkout_khz,
> int *idf, int *ndiv, int *odf)
> {
> int i, o, n, n_min, n_max;
> @@ -132,8 +143,8 @@ static int dsi_pll_get_params(int clkin_khz, int clkout_khz,
> if (clkin_khz <= 0 || clkout_khz <= 0)
> return -EINVAL;
>
> - fvco_min = LANE_MIN_KBPS * 2 * ODF_MAX;
> - fvco_max = LANE_MAX_KBPS * 2 * ODF_MIN;
> + fvco_min = dsi->lane_min_kbps * 2 * ODF_MAX;
> + fvco_max = dsi->lane_max_kbps * 2 * ODF_MIN;
>
> best_delta = 1000000; /* big started value (1000000khz) */
>
> @@ -213,6 +224,15 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode,
> int ret, bpp;
> u32 val;
>
> + /* Update lane capabilities according to hw version */
> + dsi->hw_version = dsi_read(dsi, DSI_VERSION) & VERSION;
> + dsi->lane_min_kbps = LANE_MIN_KBPS;
> + dsi->lane_max_kbps = LANE_MAX_KBPS;
> + if (dsi->hw_version == HWVER_131) {
> + dsi->lane_min_kbps *= 2;
> + dsi->lane_max_kbps *= 2;
> + }
> +
> pll_in_khz = (unsigned int)(clk_get_rate(dsi->pllref_clk) / 1000);
>
> /* Compute requested pll out */
> @@ -220,12 +240,12 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode,
> pll_out_khz = mode->clock * bpp / lanes;
> /* Add 20% to pll out to be higher than pixel bw (burst mode only) */
> pll_out_khz = (pll_out_khz * 12) / 10;
> - if (pll_out_khz > LANE_MAX_KBPS) {
> - pll_out_khz = LANE_MAX_KBPS;
> + if (pll_out_khz > dsi->lane_max_kbps) {
> + pll_out_khz = dsi->lane_max_kbps;
> DRM_WARN("Warning max phy mbps is used\n");
> }
> - if (pll_out_khz < LANE_MIN_KBPS) {
> - pll_out_khz = LANE_MIN_KBPS;
> + if (pll_out_khz < dsi->lane_min_kbps) {
> + pll_out_khz = dsi->lane_min_kbps;
> DRM_WARN("Warning min phy mbps is used\n");
> }
>
> @@ -233,7 +253,8 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode,
> idf = 0;
> ndiv = 0;
> odf = 0;
> - ret = dsi_pll_get_params(pll_in_khz, pll_out_khz, &idf, &ndiv, &odf);
> + ret = dsi_pll_get_params(dsi, pll_in_khz, pll_out_khz,
> + &idf, &ndiv, &odf);
> if (ret)
> DRM_WARN("Warning dsi_pll_get_params(): bad params\n");
>
> --
> 2.15.1
>