Re: [PATCH 07/15] ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file

From: Sricharan R
Date: Tue Feb 06 2018 - 01:19:20 EST


Hi Abhishek,

On 2/3/2018 5:00 PM, Abhishek Sahu wrote:
> On 2018-01-29 10:41, Sricharan R wrote:
>> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
>> ---
>> Âarch/arm/boot/dts/MakefileÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ | 1 +
>> Âarch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 8 ++++++++
>> Â2 files changed, 9 insertions(+)
>> Âcreate mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 21ed56d..1a8ab050 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -725,6 +725,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>> ÂÂÂÂ qcom-apq8084-mtp.dtb \
>> ÂÂÂÂ qcom-ipq4019-ap.dk01.1-c1.dtb \
>> ÂÂÂÂ qcom-ipq4019-ap.dk01.1-c2.dtb \
>> +ÂÂÂ qcom-ipq4019-ap.dk04.1-c1.dtb \
>> ÂÂÂÂ qcom-ipq8064-ap148.dtb \
>> ÂÂÂÂ qcom-msm8660-surf.dtb \
>> ÂÂÂÂ qcom-msm8960-cdp.dtb \
>> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
>> b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
>> new file mode 100644
>> index 0000000..41123be
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
>> @@ -0,0 +1,8 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (c) 2017, The Linux Foundation. All rights reserved.
>> +
>> +#include "qcom-ipq4019-ap.dk04.1.dtsi"
>> +
>> +/ {
>> +ÂÂÂ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1";
>> +};
>
> ÂIt seems major diff between DK01 C1 and other variants is
> Âqpic nand. qpic nand is only available in C1 so do we need
> Âto disable the nand is base dk04 dtsi and enable it in this
> ÂC1 dts only. same for qpic bam.

C1 - Has QPIC NAND, spi 78b5000-> cs0 -> spi_nor
C5 - Has QPIC NAND, spi 78b5000-> cs0 -> spi_nor, cs1 -> spi_nand
C2 - Has QPIC NAND, spi 78b5000-> cs0 -> spi_nor ( Audio board, yet to be posted for pending audio drivers)
C3 - spi 78b5000-> cs0 -> spi_nor

So C3 is the board where it is disabled and enabled in the rest. But from a
readability point, feels better to touch this only in each board specific file.
So will remove this from the common 04.dtsi and move it to each board file.

Regards,
Sricharan

--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation