Re: [PATCH v2 1/2] net, can, ifi: fix "write buffer full" error

[Marc Kleine-Budde]

On 02/08/2018 08:22 PM, Marek Vasut wrote:
> On 02/08/2018 03:46 PM, Marc Kleine-Budde wrote:
>> On 02/08/2018 07:47 AM, Heiko Schocher wrote:
>>> the driver reads in the ISR first the IRQpending register,
>>> and clears after that in a write *all* bits in it.
>>>
>>> It could happen that the isr register raise bits between
>>> this 2 register accesses, which leads in lost bits ...
>>>
>>> In case it clears "TX message sent successfully", the driver
>>> never sends any Tx data, and buffers to userspace run over.
>>>
>>> Fixed this:
>>> clear only the bits in the IRQpending register, the
>>> driver had read.
>>>
>>> Signed-off-by: Heiko Schocher <hs@xxxxxxx>
>>> Reviewed-by: Marek Vasut <marex@xxxxxxx>
>>
>> Applied both to linux-can.
> 
> Can you also apply them to stable, so they get into 4.9.x etc ?

I've already added stable on Cc, so they will be picked up by the stable
maintainers.

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

Attachment: signature.asc
Description: OpenPGP digital signature