Re: [PATCH v2 0/3] power: supply: Fix AXP288 fallback when not needed

[Hans de Goede]

Hi,

On 16-02-18 09:26, Carlo Caione wrote:
> From: Carlo Caione <carlo@xxxxxxxxxxxx>
>
> With commits af3ec837 and dccfae6d a blacklist was introduced to avoid
> using the ACPI drivers for AC and battery when a native PMIC driver was
> already present. While this is in general a good idea (because of broken
> DSDT or proprietary and undocumented ACPI opregions for the ACPI
> AC/battery devices) we have come across at least one CherryTrail laptop
> (ECS EF20EA) shipping the AXP288 together with a separate FG controller
> (a MAX17047) instead of the one embedded in the AXP288.

Thank you for the new version. This looks good and surprisingly
clean / small given amounts of warts surrounding this all.

The entire series is:

Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>

Regards,

Hans




> This is the interesting analisys done by Hans de Goede (thank you):
>
> Looking at the _BIX method of the BATC/PNP0C0A device, we see it referencing
> FG10:
>
> Method (_BIX, 0, NotSerialized)  // _BIX: Battery Information Extend
> {
>      If (AVBL == One)
>      {
>          BUF2 = FG10 /* \_SB_.PCI0.I2C1.FG10 */
>
> And FG10 is defined as:
>
> Field (DVFG, BufferAcc, NoLock, Preserve)
> {
>      Connection (SMFG),
>      Offset (0x10),
>      AccessAs (BufferAcc, AttribBytes (0x02)),
>      FG10,   8
> }
>
> With SMFG being defined as:
>
> Name (SMFG, ResourceTemplate ()
> {
>      I2cSerialBusV2 (0x0036, ControllerInitiated, 0x000186A0,
>          AddressingMode7Bit, "\\_SB.PCI0.I2C1",
>          0x00, ResourceConsumer, , Exclusive,
>          )
> })
>
> Looking for I2C1 address 0x0036 we find:
>
> Device (ANFG)
> {
>      Name (_HID, "MAX17047" /* Fuel Gauge Controller */)  // _HID: Hardwa
>      Name (_CID, "MAX17047" /* Fuel Gauge Controller */)  // _CID: Compat
>      Name (_DDN, "Fuel Gauge Controller")  // _DDN: DOS Device Name
>      Name (RBUF, ResourceTemplate ()
>      {
>          I2cSerialBusV2 (0x0036, ControllerInitiated, 0x00061A80,
>              AddressingMode7Bit, "\\_SB.PCI0.I2C1",
>              0x00, ResourceConsumer, , Exclusive,
>              )
>          GpioInt (Level, ActiveLow, ExclusiveAndWake, PullNone, 0x0000,
>              "\\_SB.GPO3", 0x00, ResourceConsumer, ,
>              )
>              {   // Pin list
>                  0x0001
>              }
>      })
>
> Where as the AXP288 PMIC is I2C7 address 0x034:
>
> Device (PMI1)
> {
>      Name (_ADR, Zero)  // _ADR: Address
>      Name (_HID, "INT33F4" /* XPOWER PMIC Controller */)  // _HID: Ha
>      Name (_CID, "INT33F4" /* XPOWER PMIC Controller */)  // _CID: Co
>      Name (_DDN, "XPOWER PMIC Controller")  // _DDN: DOS Device Name
>      Name (_HRV, 0x03)  // _HRV: Hardware Revision
>      Name (_UID, One)  // _UID: Unique ID
>
>      Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Setti
>      {
>          Name (SBUF, ResourceTemplate ()
>          {
>              I2cSerialBusV2 (0x0034, ControllerInitiated, 0x000F4240,
>                  AddressingMode7Bit, "\\_SB.PCI0.I2C7",
>                  0x00, ResourceConsumer, , Exclusive,
>                  )
>
> So basically this laptopt is using a separate FG chip instead of the one
> embedded in the AXP288.
>
> To have this correctly working we need basically to avoid the fallback on the
> AXP288 driver enabling again the ACPI AC/battery drivers and at the same time
> avoiding that the AXP288 FG driver is probed at all.
>
> I'm still not fully convinced that having two different quirks (one to disable
> the blacklist and another to disable the AXP288 FG probing) is the right way to
> fix this. So any comment is welcome.
>
> Changelog:
>
> v2:
>    - Split [PATCH 2/2] in two parts
>    - Rework subject prefixes
>
> Carlo Caione (3):
>    ACPI: AC/battery: Add quirk to avoid using PMIC
>    ACPI: AC/battery: Add quirks for ECS EF20EA
>    power: supply: axp288_fuel_gauge: Do not register FG on ECS EF20EA
>
>   drivers/acpi/ac.c                        | 33 ++++++++++++++++++++++++--------
>   drivers/acpi/battery.c                   | 33 ++++++++++++++++++++++++--------
>   drivers/power/supply/axp288_fuel_gauge.c |  6 ++++++
>   3 files changed, 56 insertions(+), 16 deletions(-)