Re: [PATCH 05/15] ARM64: dts: Add R-Car Salvator-x M3-N support
From: Geert Uytterhoeven
Date: Fri Feb 16 2018 - 04:36:29 EST
Hi Jacopo,
On Tue, Feb 13, 2018 at 10:45 AM, Jacopo Mondi
<jacopo+renesas@xxxxxxxxxx> wrote:
> Add initial support for R-Car M3-N Salvator-x and r8a77965 SoC in
> device tree with cpg-mssr, reset and clock nodes.
>
> Add place-holder device nodes for all nodes referred by
> "salvator-common.dtsi"
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
> + gic: interrupt-controller@f1010000 {
> + compatible = "arm,gic-400";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + reg = <0x0 0xf1010000 0 0x1000>,
> + <0x0 0xf1020000 0 0x20000>,
> + <0x0 0xf1040000 0 0x20000>,
> + <0x0 0xf1060000 0 0x20000>;
> + interrupts = <GIC_PPI 9
> + (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
Given you have 2 CPU cores, it should say GIC_CPU_MASK_SIMPLE(2).
> + clocks = <&cpg CPG_MOD 408>;
> + clock-names = "clk";
> + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
> + resets = <&cpg 408>;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13
> + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14
> + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11
> + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10
> + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
This one is correct.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds