[PATCH v3 2/2] dt-bindings: introduce Command DB for QCOM SoCs

[Lina Iyer]

From: Mahesh Sivasubramanian <msivasub@xxxxxxxxxxxxxx>

Command DB provides information on shared resources like clocks,
regulators etc., probed at boot by the remote subsytem and made
available in shared memory.

Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Mahesh Sivasubramanian <msivasub@xxxxxxxxxxxxxx>
Signed-off-by: Lina Iyer <ilina@xxxxxxxxxxxxxx>
---
 .../devicetree/bindings/arm/msm/cmd-db.txt         | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/msm/cmd-db.txt

diff --git a/Documentation/devicetree/bindings/arm/msm/cmd-db.txt b/Documentation/devicetree/bindings/arm/msm/cmd-db.txt
new file mode 100644
index 000000000000..039be54fe9c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/cmd-db.txt
@@ -0,0 +1,30 @@
+Command DB
+---------
+
+Command DB is a database that provides a mapping between resource key and the
+resource address for a system resource managed by a remote processor. The data
+is stored in a shared memory region and is loaded by the remote processor.
+
+Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for
+controlling shared resources. Depending on the board configuration the shared
+resource properties may change. These properties are dynamically probed by the
+remote processor and made available in the shared memory.
+
+The devicetree representation of the command DB driver should be:
+
+PROPERTIES:
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: Should be "qcom,cmd-db"
+
+Example:
+
+	reserved-memory {
+		[...]
+		qcom,cmd-db@c3f000c {
+			reg = <0x0 0xc3f000c 0x0 0x8>,
+			      <0x0 0x85fe0000 0x0 0x20000>;
+			compatible = "qcom,cmd-db";
+		};
+	};
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project