[PATCH 4/8] scsi: hisi_sas: fix the issue of setting linkrate register
From: John Garry
Date: Mon Feb 19 2018 - 13:23:28 EST
From: Xiaofei Tan <tanxiaofei@xxxxxxxxxx>
It is not right to set the register PROG_PHY_LINK_RATE while PHY
is still enabled. So if we want to change PHY linkrate, we need to
disable PHY before setting the register PROG_PHY_LINK_RATE, and then
start-up PHY. This patch is to fix this issue.
Signed-off-by: Xiaofei Tan <tanxiaofei@xxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 5 +++--
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 5 +++--
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 5 +++--
3 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 38bbda9..2eb8980 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -881,10 +881,11 @@ static void phy_set_linkrate_v1_hw(struct hisi_hba *hisi_hba, int phy_no,
prog_phy_link_rate &= ~0xff;
prog_phy_link_rate |= rate_mask;
+ disable_phy_v1_hw(hisi_hba, phy_no);
+ msleep(100);
hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
prog_phy_link_rate);
-
- phy_hard_reset_v1_hw(hisi_hba, phy_no);
+ start_phy_v1_hw(hisi_hba, phy_no);
}
static int get_wideport_bitmap_v1_hw(struct hisi_hba *hisi_hba, int port_id)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 662d259..357138f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -1611,10 +1611,11 @@ static void phy_set_linkrate_v2_hw(struct hisi_hba *hisi_hba, int phy_no,
prog_phy_link_rate &= ~0xff;
prog_phy_link_rate |= rate_mask;
+ disable_phy_v2_hw(hisi_hba, phy_no);
+ msleep(100);
hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
prog_phy_link_rate);
-
- phy_hard_reset_v2_hw(hisi_hba, phy_no);
+ start_phy_v2_hw(hisi_hba, phy_no);
}
static int get_wideport_bitmap_v2_hw(struct hisi_hba *hisi_hba, int port_id)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 1ee95ab..8da9de7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1862,10 +1862,11 @@ static void phy_set_linkrate_v3_hw(struct hisi_hba *hisi_hba, int phy_no,
prog_phy_link_rate &= ~0xff;
prog_phy_link_rate |= rate_mask;
+ disable_phy_v3_hw(hisi_hba, phy_no);
+ msleep(100);
hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
prog_phy_link_rate);
-
- phy_hard_reset_v3_hw(hisi_hba, phy_no);
+ start_phy_v3_hw(hisi_hba, phy_no);
}
static void interrupt_disable_v3_hw(struct hisi_hba *hisi_hba)
--
1.9.1