[PATCH v2] pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0
From: David Lechner
Date: Mon Feb 19 2018 - 16:57:12 EST
This fixes pcs_request_gpio() in the pinctrl-single driver when
bits_per_mux != 0. It appears this was overlooked when the multiple
pins per register feature was added.
Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules")
Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
---
v2 changes:
- don't wrap Fixes: line in commit message since it is a special machine-
readable line.
There was some discussion in v1 about using DIV_ROUND_UP(), etc. macros, but
the consensus was to leave it as-is since it matches existing code and that
macros can be introduced in another patch.
drivers/pinctrl/pinctrl-single.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index cec7537..a7c5eb3 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -391,9 +391,25 @@ static int pcs_request_gpio(struct pinctrl_dev *pctldev,
|| pin < frange->offset)
continue;
mux_bytes = pcs->width / BITS_PER_BYTE;
- data = pcs->read(pcs->base + pin * mux_bytes) & ~pcs->fmask;
- data |= frange->gpiofunc;
- pcs->write(data, pcs->base + pin * mux_bytes);
+
+ if (pcs->bits_per_mux) {
+ int byte_num, offset, pin_shift;
+
+ byte_num = (pcs->bits_per_pin * pin) / BITS_PER_BYTE;
+ offset = (byte_num / mux_bytes) * mux_bytes;
+ pin_shift = pin % (pcs->width / pcs->bits_per_pin) *
+ pcs->bits_per_pin;
+
+ data = pcs->read(pcs->base + offset);
+ data &= ~(pcs->fmask << pin_shift);
+ data |= frange->gpiofunc << pin_shift;
+ pcs->write(data, pcs->base + offset);
+ } else {
+ data = pcs->read(pcs->base + pin * mux_bytes);
+ data &= ~pcs->fmask;
+ data |= frange->gpiofunc;
+ pcs->write(data, pcs->base + pin * mux_bytes);
+ }
break;
}
return 0;
--
2.7.4