Re: [PATCH v1 2/2] drm/panel: Add support for Raydium rm68200 panel driver

From: Yannick FERTRE
Date: Fri Feb 23 2018 - 03:31:58 EST

Next message: Radoslaw Pietrzyk: "[PATCH v2 0/2] v2 patches for stm32-exti irq hierarchy"
Previous message: Yannick FERTRE: "Re: [PATCH v1 1/2] dt-bindings/display/panel: Add support for Raydium rm68200 dsi panel"
Next in thread: Philippe CORNU: "Re: [PATCH v1 2/2] drm/panel: Add support for Raydium rm68200 panel driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Reviewed-by: Yannick FertrÃ <yannick.fertre@xxxxxx>

On 02/08/2018 03:30 PM, Philippe Cornu wrote:
> This patch adds Raydium Semiconductor Corporation rm68200
> 5.5" 720x1280 TFT LCD panel driver (MIPI-DSI video mode).
>
> Signed-off-by: Philippe Cornu <philippe.cornu@xxxxxx>
> ---
> drivers/gpu/drm/panel/Kconfig | 8 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-raydium-rm68200.c | 464 ++++++++++++++++++++++++++
> 3 files changed, 473 insertions(+)
> create mode 100755 drivers/gpu/drm/panel/panel-raydium-rm68200.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 988048ebcc22..08d99dd46765 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -108,6 +108,14 @@ config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
> Pi 7" Touchscreen. To compile this driver as a module,
> choose M here.
>
> +config DRM_PANEL_RAYDIUM_RM68200
> + tristate "Raydium rm68200 720x1280 dsi 2dl video mode panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + help
> + Say Y here if you want to enable support for Raydium rm68200
> + 720x1280 dsi 2dl video mode panel
> +
> config DRM_PANEL_SAMSUNG_S6E3HA2
> tristate "Samsung S6E3HA2 DSI video mode panel"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 3d2a88d0e965..f26efc11d746 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
> obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o
> obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
> obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o
> +obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o
> diff --git a/drivers/gpu/drm/panel/panel-raydium-rm68200.c b/drivers/gpu/drm/panel/panel-raydium-rm68200.c
> new file mode 100755
> index 000000000000..f3e15873d05a
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-raydium-rm68200.c
> @@ -0,0 +1,464 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) STMicroelectronics SA 2017
> + *
> + * Authors: Philippe Cornu <philippe.cornu@xxxxxx>
> + * Yannick Fertre <yannick.fertre@xxxxxx>
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_panel.h>
> +#include <linux/backlight.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
> +#include <video/mipi_display.h>
> +
> +#define DRV_NAME "raydium_rm68200"
> +
> +/*** Manufacturer Command Set ***/
> +#define MCS_CMD_MODE_SW 0xFE /* CMD Mode Switch */
> +#define MCS_CMD1_UCS 0x00 /* User Command Set (UCS = CMD1) */
> +#define MCS_CMD2_P0 0x01 /* Manufacture Command Set Page0 (CMD2 P0) */
> +#define MCS_CMD2_P1 0x02 /* Manufacture Command Set Page1 (CMD2 P1) */
> +#define MCS_CMD2_P2 0x03 /* Manufacture Command Set Page2 (CMD2 P2) */
> +#define MCS_CMD2_P3 0x04 /* Manufacture Command Set Page3 (CMD2 P3) */
> +
> +/* CMD2 P0 commands (Display Options and Power) */
> +#define MCS_STBCTR 0x12 /* TE1 Output Setting Zig-Zag Connection */
> +#define MCS_SGOPCTR 0x16 /* Source Bias Current */
> +#define MCS_SDCTR 0x1A /* Source Output Delay Time */
> +#define MCS_INVCTR 0x1B /* Inversion Type */
> +#define MCS_EXT_PWR_IC 0x24 /* External PWR IC Control */
> +#define MCS_SETAVDD 0x27 /* PFM Control for AVDD Output */
> +#define MCS_SETAVEE 0x29 /* PFM Control for AVEE Output */
> +#define MCS_BT2CTR 0x2B /* DDVDL Charge Pump Control */
> +#define MCS_BT3CTR 0x2F /* VGH Charge Pump Control */
> +#define MCS_BT4CTR 0x34 /* VGL Charge Pump Control */
> +#define MCS_VCMCTR 0x46 /* VCOM Output Level Control */
> +#define MCS_SETVGN 0x52 /* VG M/S N Control */
> +#define MCS_SETVGP 0x54 /* VG M/S P Control */
> +#define MCS_SW_CTRL 0x5F /* Interface Control for PFM and MIPI */
> +
> +/* CMD2 P2 commands (GOA Timing Control) - no description in datasheet */
> +#define GOA_VSTV1 0x00
> +#define GOA_VSTV2 0x07
> +#define GOA_VCLK1 0x0E
> +#define GOA_VCLK2 0x17
> +#define GOA_VCLK_OPT1 0x20
> +#define GOA_BICLK1 0x2A
> +#define GOA_BICLK2 0x37
> +#define GOA_BICLK3 0x44
> +#define GOA_BICLK4 0x4F
> +#define GOA_BICLK_OPT1 0x5B
> +#define GOA_BICLK_OPT2 0x60
> +#define MCS_GOA_GPO1 0x6D
> +#define MCS_GOA_GPO2 0x71
> +#define MCS_GOA_EQ 0x74
> +#define MCS_GOA_CLK_GALLON 0x7C
> +#define MCS_GOA_FS_SEL0 0x7E
> +#define MCS_GOA_FS_SEL1 0x87
> +#define MCS_GOA_FS_SEL2 0x91
> +#define MCS_GOA_FS_SEL3 0x9B
> +#define MCS_GOA_BS_SEL0 0xAC
> +#define MCS_GOA_BS_SEL1 0xB5
> +#define MCS_GOA_BS_SEL2 0xBF
> +#define MCS_GOA_BS_SEL3 0xC9
> +#define MCS_GOA_BS_SEL4 0xD3
> +
> +/* CMD2 P3 commands (Gamma) */
> +#define MCS_GAMMA_VP 0x60 /* Gamma VP1~VP16 */
> +#define MCS_GAMMA_VN 0x70 /* Gamma VN1~VN16 */
> +
> +struct rm68200 {
> + struct device *dev;
> + struct drm_panel panel;
> + struct gpio_desc *reset_gpio;
> + struct regulator *supply;
> + struct backlight_device *bl_dev;
> + bool prepared;
> + bool enabled;
> +};
> +
> +static const struct drm_display_mode default_mode = {
> + .clock = 52582,
> + .hdisplay = 720,
> + .hsync_start = 720 + 38,
> + .hsync_end = 720 + 38 + 8,
> + .htotal = 720 + 38 + 8 + 38,
> + .vdisplay = 1280,
> + .vsync_start = 1280 + 12,
> + .vsync_end = 1280 + 12 + 4,
> + .vtotal = 1280 + 12 + 4 + 12,
> + .vrefresh = 50,
> + .flags = 0,
> + .width_mm = 68,
> + .height_mm = 122,
> +};
> +
> +static inline struct rm68200 *panel_to_rm68200(struct drm_panel *panel)
> +{
> + return container_of(panel, struct rm68200, panel);
> +}
> +
> +static void rm68200_dcs_write_buf(struct rm68200 *ctx, const void *data,
> + size_t len)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> +
> + if (mipi_dsi_dcs_write_buffer(dsi, data, len) < 0)
> + DRM_WARN("mipi dsi dcs write buffer failed\n");
> +}
> +
> +static void rm68200_dcs_write_cmd(struct rm68200 *ctx, u8 cmd, u8 value)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> +
> + if (mipi_dsi_dcs_write(dsi, cmd, &value, 1) < 0)
> + DRM_WARN("mipi dsi dcs write failed\n");
> +}
> +
> +#define dcs_write_seq(ctx, seq...) \
> +({ \
> + static const u8 d[] = { seq }; \
> + rm68200_dcs_write_buf(ctx, d, ARRAY_SIZE(d)); \
> +})
> +
> +/*
> + * This panel is not able to auto-increment all cmd addresses so for some of
> + * them, we need to send them one by one...
> + */
> +#define dcs_write_cmd_seq(ctx, cmd, seq...) \
> +({ \
> + static const u8 d[] = { seq }; \
> + static int i; \
> + for (i = 0; i < ARRAY_SIZE(d) ; i++) \
> + rm68200_dcs_write_cmd(ctx, cmd + i, d[i]); \
> +})
> +
> +static void rm68200_init_sequence(struct rm68200 *ctx)
> +{
> + /* Enter CMD2 with page 0 */
> + dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD2_P0);
> + dcs_write_cmd_seq(ctx, MCS_EXT_PWR_IC, 0xC0, 0x53, 0x00);
> + dcs_write_seq(ctx, MCS_BT2CTR, 0xE5);
> + dcs_write_seq(ctx, MCS_SETAVDD, 0x0A);
> + dcs_write_seq(ctx, MCS_SETAVEE, 0x0A);
> + dcs_write_seq(ctx, MCS_SGOPCTR, 0x52);
> + dcs_write_seq(ctx, MCS_BT3CTR, 0x53);
> + dcs_write_seq(ctx, MCS_BT4CTR, 0x5A);
> + dcs_write_seq(ctx, MCS_INVCTR, 0x00);
> + dcs_write_seq(ctx, MCS_STBCTR, 0x0A);
> + dcs_write_seq(ctx, MCS_SDCTR, 0x06);
> + dcs_write_seq(ctx, MCS_VCMCTR, 0x56);
> + dcs_write_seq(ctx, MCS_SETVGN, 0xA0, 0x00);
> + dcs_write_seq(ctx, MCS_SETVGP, 0xA0, 0x00);
> + dcs_write_seq(ctx, MCS_SW_CTRL, 0x11); /* 2 data lanes, see doc */
> +
> + dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD2_P2);
> + dcs_write_seq(ctx, GOA_VSTV1, 0x05);
> + dcs_write_seq(ctx, 0x02, 0x0B);
> + dcs_write_seq(ctx, 0x03, 0x0F);
> + dcs_write_seq(ctx, 0x04, 0x7D, 0x00, 0x50);
> + dcs_write_cmd_seq(ctx, GOA_VSTV2, 0x05, 0x16, 0x0D, 0x11, 0x7D, 0x00,
> + 0x50);
> + dcs_write_cmd_seq(ctx, GOA_VCLK1, 0x07, 0x08, 0x01, 0x02, 0x00, 0x7D,
> + 0x00, 0x85, 0x08);
> + dcs_write_cmd_seq(ctx, GOA_VCLK2, 0x03, 0x04, 0x05, 0x06, 0x00, 0x7D,
> + 0x00, 0x85, 0x08);
> + dcs_write_seq(ctx, GOA_VCLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00);
> + dcs_write_cmd_seq(ctx, GOA_BICLK1, 0x07, 0x08);
> + dcs_write_seq(ctx, 0x2D, 0x01);
> + dcs_write_seq(ctx, 0x2F, 0x02, 0x00, 0x40, 0x05, 0x08, 0x54, 0x7D,
> + 0x00);
> + dcs_write_cmd_seq(ctx, GOA_BICLK2, 0x03, 0x04, 0x05, 0x06, 0x00);
> + dcs_write_seq(ctx, 0x3D, 0x40);
> + dcs_write_seq(ctx, 0x3F, 0x05, 0x08, 0x54, 0x7D, 0x00);
> + dcs_write_seq(ctx, GOA_BICLK3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00);
> + dcs_write_seq(ctx, GOA_BICLK4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00);
> + dcs_write_seq(ctx, 0x58, 0x00, 0x00, 0x00);
> + dcs_write_seq(ctx, GOA_BICLK_OPT1, 0x00, 0x00, 0x00, 0x00, 0x00);
> + dcs_write_seq(ctx, GOA_BICLK_OPT2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
> + dcs_write_seq(ctx, MCS_GOA_GPO1, 0x00, 0x00, 0x00, 0x00);
> + dcs_write_seq(ctx, MCS_GOA_GPO2, 0x00, 0x20, 0x00);
> + dcs_write_seq(ctx, MCS_GOA_EQ, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08,
> + 0x00, 0x00);
> + dcs_write_seq(ctx, MCS_GOA_CLK_GALLON, 0x00, 0x00);
> + dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL0, 0xBF, 0x02, 0x06, 0x14, 0x10,
> + 0x16, 0x12, 0x08, 0x3F);
> + dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0C,
> + 0x0A, 0x0E, 0x3F, 0x3F, 0x00);
> + dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL2, 0x04, 0x3F, 0x3F, 0x3F, 0x3F,
> + 0x05, 0x01, 0x3F, 0x3F, 0x0F);
> + dcs_write_cmd_seq(ctx, MCS_GOA_FS_SEL3, 0x0B, 0x0D, 0x3F, 0x3F, 0x3F,
> + 0x3F);
> + dcs_write_cmd_seq(ctx, 0xA2, 0x3F, 0x09, 0x13, 0x17, 0x11, 0x15);
> + dcs_write_cmd_seq(ctx, 0xA9, 0x07, 0x03, 0x3F);
> + dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL0, 0x3F, 0x05, 0x01, 0x17, 0x13,
> + 0x15, 0x11, 0x0F, 0x3F);
> + dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL1, 0x3F, 0x3F, 0x3F, 0x3F, 0x0B,
> + 0x0D, 0x09, 0x3F, 0x3F, 0x07);
> + dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL2, 0x03, 0x3F, 0x3F, 0x3F, 0x3F,
> + 0x02, 0x06, 0x3F, 0x3F, 0x08);
> + dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL3, 0x0C, 0x0A, 0x3F, 0x3F, 0x3F,
> + 0x3F, 0x3F, 0x0E, 0x10, 0x14);
> + dcs_write_cmd_seq(ctx, MCS_GOA_BS_SEL4, 0x12, 0x16, 0x00, 0x04, 0x3F);
> + dcs_write_seq(ctx, 0xDC, 0x02);
> + dcs_write_seq(ctx, 0xDE, 0x12);
> +
> + dcs_write_seq(ctx, MCS_CMD_MODE_SW, 0x0E); /* No documentation */
> + dcs_write_seq(ctx, 0x01, 0x75);
> +
> + dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD2_P3);
> + dcs_write_cmd_seq(ctx, MCS_GAMMA_VP, 0x00, 0x0C, 0x12, 0x0E, 0x06,
> + 0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
> + 0x12, 0x0C, 0x00);
> + dcs_write_cmd_seq(ctx, MCS_GAMMA_VN, 0x00, 0x0C, 0x12, 0x0E, 0x06,
> + 0x12, 0x0E, 0x0B, 0x15, 0x0B, 0x10, 0x07, 0x0F,
> + 0x12, 0x0C, 0x00);
> +
> + /* Exit CMD2 */
> + dcs_write_seq(ctx, MCS_CMD_MODE_SW, MCS_CMD1_UCS);
> +}
> +
> +static int rm68200_disable(struct drm_panel *panel)
> +{
> + struct rm68200 *ctx = panel_to_rm68200(panel);
> +
> + if (!ctx->enabled)
> + return 0;
> +
> + if (ctx->bl_dev) {
> + ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
> + ctx->bl_dev->props.state |= BL_CORE_FBBLANK;
> + backlight_update_status(ctx->bl_dev);
> + }
> +
> + ctx->enabled = false;
> +
> + return 0;
> +}
> +
> +static int rm68200_unprepare(struct drm_panel *panel)
> +{
> + struct rm68200 *ctx = panel_to_rm68200(panel);
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + int ret;
> +
> + if (!ctx->prepared)
> + return 0;
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret)
> + DRM_WARN("failed to set display off: %d\n", ret);
> +
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret)
> + DRM_WARN("failed to enter sleep mode: %d\n", ret);
> +
> + msleep(120);
> +
> + if (ctx->reset_gpio) {
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + msleep(20);
> + }
> +
> + regulator_disable(ctx->supply);
> +
> + ctx->prepared = false;
> +
> + return 0;
> +}
> +
> +static int rm68200_prepare(struct drm_panel *panel)
> +{
> + struct rm68200 *ctx = panel_to_rm68200(panel);
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + int ret;
> +
> + if (ctx->prepared)
> + return 0;
> +
> + ret = regulator_enable(ctx->supply);
> + if (ret < 0) {
> + DRM_ERROR("failed to enable supply: %d\n", ret);
> + return ret;
> + }
> +
> + if (ctx->reset_gpio) {
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + msleep(20);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + msleep(100);
> + }
> +
> + rm68200_init_sequence(ctx);
> +
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret)
> + return ret;
> +
> + msleep(125);
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret)
> + return ret;
> +
> + msleep(20);
> +
> + ctx->prepared = true;
> +
> + return 0;
> +}
> +
> +static int rm68200_enable(struct drm_panel *panel)
> +{
> + struct rm68200 *ctx = panel_to_rm68200(panel);
> +
> + if (ctx->enabled)
> + return 0;
> +
> + if (ctx->bl_dev) {
> + ctx->bl_dev->props.state &= ~BL_CORE_FBBLANK;
> + ctx->bl_dev->props.power = FB_BLANK_UNBLANK;
> + backlight_update_status(ctx->bl_dev);
> + }
> +
> + ctx->enabled = true;
> +
> + return 0;
> +}
> +
> +static int rm68200_get_modes(struct drm_panel *panel)
> +{
> + struct drm_display_mode *mode;
> +
> + mode = drm_mode_duplicate(panel->drm, &default_mode);
> + if (!mode) {
> + DRM_ERROR("failed to add mode %ux%ux@%u\n",
> + default_mode.hdisplay, default_mode.vdisplay,
> + default_mode.vrefresh);
> + return -ENOMEM;
> + }
> +
> + drm_mode_set_name(mode);
> +
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> + drm_mode_probed_add(panel->connector, mode);
> +
> + panel->connector->display_info.width_mm = mode->width_mm;
> + panel->connector->display_info.height_mm = mode->height_mm;
> +
> + return 1;
> +}
> +
> +static const struct drm_panel_funcs rm68200_drm_funcs = {
> + .disable = rm68200_disable,
> + .unprepare = rm68200_unprepare,
> + .prepare = rm68200_prepare,
> + .enable = rm68200_enable,
> + .get_modes = rm68200_get_modes,
> +};
> +
> +static int rm68200_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct device_node *backlight;
> + struct rm68200 *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->reset_gpio)) {
> + dev_err(dev, "cannot get reset-gpio\n");
> + return PTR_ERR(ctx->reset_gpio);
> + }
> +
> + ctx->supply = devm_regulator_get(dev, "power");
> + if (IS_ERR(ctx->supply)) {
> + dev_err(dev, "cannot get regulator\n");
> + return PTR_ERR(ctx->supply);
> + }
> +
> + backlight = of_parse_phandle(dev->of_node, "backlight", 0);
> + if (backlight) {
> + ctx->bl_dev = of_find_backlight_by_node(backlight);
> + of_node_put(backlight);
> +
> + if (!ctx->bl_dev)
> + return -EPROBE_DEFER;
> + }
> +
> + mipi_dsi_set_drvdata(dsi, ctx);
> +
> + ctx->dev = dev;
> +
> + dsi->lanes = 2;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_MODE_LPM;
> +
> + drm_panel_init(&ctx->panel);
> + ctx->panel.dev = dev;
> + ctx->panel.funcs = &rm68200_drm_funcs;
> +
> + drm_panel_add(&ctx->panel);
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + dev_err(dev, "mipi_dsi_attach failed. Is host ready?\n");
> + drm_panel_remove(&ctx->panel);
> + if (ctx->bl_dev)
> + put_device(&ctx->bl_dev->dev);
> + return ret;
> + }
> +
> + DRM_INFO(DRV_NAME "_panel %ux%u@%u %ubpp dsi %udl - ready\n",
> + default_mode.hdisplay, default_mode.vdisplay,
> + default_mode.vrefresh,
> + mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
> +
> + return 0;
> +}
> +
> +static int rm68200_remove(struct mipi_dsi_device *dsi)
> +{
> + struct rm68200 *ctx = mipi_dsi_get_drvdata(dsi);
> +
> + if (ctx->bl_dev)
> + put_device(&ctx->bl_dev->dev);
> +
> + mipi_dsi_detach(dsi);
> + drm_panel_remove(&ctx->panel);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id raydium_rm68200_of_match[] = {
> + { .compatible = "raydium,rm68200" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, raydium_rm68200_of_match);
> +
> +static struct mipi_dsi_driver raydium_rm68200_driver = {
> + .probe = rm68200_probe,
> + .remove = rm68200_remove,
> + .driver = {
> + .name = DRV_NAME "_panel",
> + .of_match_table = raydium_rm68200_of_match,
> + },
> +};
> +module_mipi_dsi_driver(raydium_rm68200_driver);
> +
> +MODULE_AUTHOR("Philippe Cornu <philippe.cornu@xxxxxx>");
> +MODULE_AUTHOR("Yannick Fertre <yannick.fertre@xxxxxx>");
> +MODULE_DESCRIPTION("DRM Driver for Raydium RM68200 MIPI DSI panel");
> +MODULE_LICENSE("GPL v2");

Next message: Radoslaw Pietrzyk: "[PATCH v2 0/2] v2 patches for stm32-exti irq hierarchy"
Previous message: Yannick FERTRE: "Re: [PATCH v1 1/2] dt-bindings/display/panel: Add support for Raydium rm68200 dsi panel"
Next in thread: Philippe CORNU: "Re: [PATCH v1 2/2] drm/panel: Add support for Raydium rm68200 panel driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]