[PATCH v1 13/19] arm: dts: mt7623: move node mt6323 leds to mt6323.dtsi

From: sean.wang
Date: Fri Feb 23 2018 - 05:17:09 EST


From: Sean Wang <sean.wang@xxxxxxxxxxxx>

Since those LEDs are parts of PMIC MT6323, it is reasonable to merge
those LEDs node definition back into mt6323.dtsi. This way can improve
the reusability of those nodes among different boards with the same PMIC.

Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
Cc: Lee Jones <lee.jones@xxxxxxxxxx>
---
arch/arm/boot/dts/mt6323.dtsi | 26 ++++++++++++++++++++++++-
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 28 ---------------------------
2 files changed, 25 insertions(+), 29 deletions(-)

diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi
index 7c783d6..44c5642 100644
--- a/arch/arm/boot/dts/mt6323.dtsi
+++ b/arch/arm/boot/dts/mt6323.dtsi
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2017 MediaTek Inc.
+ * Copyright (c) 2017-2018 MediaTek Inc.
* Author: John Crispin <john@xxxxxxxxxxx>
* Sean Wang <sean.wang@xxxxxxxxxxxx>
* This program is free software; you can redistribute it and/or modify
@@ -237,5 +237,29 @@
regulator-enable-ramp-delay = <216>;
};
};
+
+ leds {
+ compatible = "mediatek,mt6323-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "mt6323:isink:green";
+ default-state = "off";
+ };
+
+ led@1 {
+ reg = <1>;
+ label = "mt6323:isink:red";
+ default-state = "off";
+ };
+
+ led@2 {
+ reg = <2>;
+ label = "mt6323:isink:blue";
+ default-state = "off";
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 75e61c4..767b225 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -483,34 +483,6 @@
status = "okay";
};

-&pwrap {
- mt6323 {
- mt6323led: led {
- compatible = "mediatek,mt6323-led";
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@0 {
- reg = <0>;
- label = "bpi-r2:isink:green";
- default-state = "off";
- };
-
- led@1 {
- reg = <1>;
- label = "bpi-r2:isink:red";
- default-state = "off";
- };
-
- led@2 {
- reg = <2>;
- label = "bpi-r2:isink:blue";
- default-state = "off";
- };
- };
- };
-};
-
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins_a>;
--
2.7.4