[PATCH v5 0/2] irqchip: add support for Layerscape external interrupt lines

[Rasmus Villemoes]

Changes since v4:

- add SPDX license identifier to .c file
- use 'reg' property to specify INTPCR register
- use 'fsl,extirq-map' as property name for the mapping of interrupt numbers
- rebase to v4.16-rc2
- change #interrupt-cells to 2 to avoid redundancy in interrupt specifiers

Changes since v3:

- Add non-empty commit log to 2/2

Changes since v2:

- use fsl,bit-reverse rather than bit-reverse
- make the dts node a child of the scfg node
- make the node name "interrupt-controller"

Rasmus Villemoes (2):
  irqchip: add support for Layerscape external interrupt lines
  dt/bindings: Add bindings for Layerscape external irqs

 .../interrupt-controller/fsl,ls-extirq.txt         |  44 ++++++
 drivers/irqchip/Makefile                           |   1 +
 drivers/irqchip/irq-ls-extirq.c                    | 176 +++++++++++++++++++++
 3 files changed, 221 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
 create mode 100644 drivers/irqchip/irq-ls-extirq.c

-- 
2.15.1