[PATCH v2 11/11] test_firmware: test three firmware kernel configs using a proc knob
From: Luis R. Rodriguez
Date: Fri Feb 23 2018 - 21:47:45 EST
Since we now have knobs to twiddle what used to be set on kernel
configurations we can build one base kernel configuration and modify
behaviour to mimic such kernel configurations to test them.
Provided you build a kernel with:
CONFIG_TEST_FIRMWARE=y
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
We should now be able test all possible kernel configurations
when FW_LOADER=y. Note that when FW_LOADER=m we just don't provide
the built-in functionality of the built-in firmware.
If you're on an old kernel and either don't have /proc/config.gz
(CONFIG_IKCONFIG_PROC) or haven't enabled CONFIG_FW_LOADER_USER_HELPER
we cannot run these dynamic tests, so just run both scripts just
as we used to before making blunt assumptions about your setup
and requirements exactly as we did before.
Signed-off-by: Luis R. Rodriguez <mcgrof@xxxxxxxxxx>
---
tools/testing/selftests/firmware/Makefile | 2 +-
tools/testing/selftests/firmware/fw_lib.sh | 53 +++++++++++++++++++
tools/testing/selftests/firmware/fw_run_tests.sh | 67 ++++++++++++++++++++++++
3 files changed, 121 insertions(+), 1 deletion(-)
create mode 100755 tools/testing/selftests/firmware/fw_run_tests.sh
diff --git a/tools/testing/selftests/firmware/Makefile b/tools/testing/selftests/firmware/Makefile
index 1894d625af2d..826f38d5dd19 100644
--- a/tools/testing/selftests/firmware/Makefile
+++ b/tools/testing/selftests/firmware/Makefile
@@ -3,7 +3,7 @@
# No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
all:
-TEST_PROGS := fw_filesystem.sh fw_fallback.sh
+TEST_PROGS := fw_run_tests.sh
include ../lib.mk
diff --git a/tools/testing/selftests/firmware/fw_lib.sh b/tools/testing/selftests/firmware/fw_lib.sh
index 0702dbf0f06b..3362a2aac40e 100755
--- a/tools/testing/selftests/firmware/fw_lib.sh
+++ b/tools/testing/selftests/firmware/fw_lib.sh
@@ -47,6 +47,34 @@ check_setup()
{
HAS_FW_LOADER_USER_HELPER=$(kconfig_has CONFIG_FW_LOADER_USER_HELPER=y)
HAS_FW_LOADER_USER_HELPER_FALLBACK=$(kconfig_has CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y)
+ PROC_FW_IGNORE_SYSFS_FALLBACK="N"
+ PROC_FW_FORCE_SYSFS_FALLBACK="N"
+
+ if [ -z $PROC_SYS_DIR ]; then
+ PROC_SYS_DIR="/proc/sys/kernel"
+ fi
+
+ FW_PROC="${PROC_SYS_DIR}/firmware_config"
+ FW_FORCE_SYSFS_FALLBACK="$FW_PROC/force_sysfs_fallback"
+ FW_IGNORE_SYSFS_FALLBACK="$FW_PROC/ignore_sysfs_fallback"
+
+ if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then
+ PROC_FW_FORCE_SYSFS_FALLBACK=$(cat $FW_FORCE_SYSFS_FALLBACK)
+ fi
+
+ if [ -f $FW_IGNORE_SYSFS_FALLBACK ]; then
+ PROC_FW_IGNORE_SYSFS_FALLBACK=$(cat $FW_IGNORE_SYSFS_FALLBACK)
+ fi
+
+ if [ "$PROC_FW_IGNORE_SYSFS_FALLBACK" = "1" ]; then
+ HAS_FW_LOADER_USER_HELPER_FALLBACK="no"
+ HAS_FW_LOADER_USER_HELPER="no"
+ fi
+
+ if [ "$PROC_FW_FORCE_SYSFS_FALLBACK" = "1" ]; then
+ HAS_FW_LOADER_USER_HELPER="yes"
+ HAS_FW_LOADER_USER_HELPER_FALLBACK="yes"
+ fi
if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
OLD_TIMEOUT=$(cat /sys/class/firmware/timeout)
@@ -76,6 +104,30 @@ setup_tmp_file()
fi
}
+proc_set_force_sysfs_fallback()
+{
+ if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then
+ echo -n $1 > $FW_FORCE_SYSFS_FALLBACK
+ PROC_FW_FORCE_SYSFS_FALLBACK=$(cat $FW_FORCE_SYSFS_FALLBACK)
+ check_setup
+ fi
+}
+
+proc_set_ignore_sysfs_fallback()
+{
+ if [ -f $FW_IGNORE_SYSFS_FALLBACK ]; then
+ echo -n $1 > $FW_IGNORE_SYSFS_FALLBACK
+ PROC_FW_IGNORE_SYSFS_FALLBACK=$(cat $FW_IGNORE_SYSFS_FALLBACK)
+ check_setup
+ fi
+}
+
+proc_restore_defaults()
+{
+ proc_set_force_sysfs_fallback 0
+ proc_set_ignore_sysfs_fallback 0
+}
+
test_finish()
{
if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
@@ -93,6 +145,7 @@ test_finish()
if [ -d $FWPATH ]; then
rm -rf "$FWPATH"
fi
+ proc_restore_defaults
}
kconfig_has()
diff --git a/tools/testing/selftests/firmware/fw_run_tests.sh b/tools/testing/selftests/firmware/fw_run_tests.sh
new file mode 100755
index 000000000000..a12b5809ad8b
--- /dev/null
+++ b/tools/testing/selftests/firmware/fw_run_tests.sh
@@ -0,0 +1,67 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This runs all known tests across all known possible configurations we could
+# emulate in one run.
+
+set -e
+
+TEST_DIR=$(dirname $0)
+source $TEST_DIR/fw_lib.sh
+
+run_tests()
+{
+ $TEST_DIR/fw_filesystem.sh
+ $TEST_DIR/fw_fallback.sh
+}
+
+run_test_config_0001()
+{
+ echo "-----------------------------------------------------"
+ echo "Running kernel configuration test 1 -- rare"
+ echo "Emulates:"
+ echo "CONFIG_FW_LOADER=y"
+ echo "CONFIG_FW_LOADER_USER_HELPER=n"
+ echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n"
+ proc_set_force_sysfs_fallback 0
+ proc_set_ignore_sysfs_fallback 1
+ run_tests
+}
+
+run_test_config_0002()
+{
+ echo "-----------------------------------------------------"
+ echo "Running kernel configuration test 2 -- distro"
+ echo "Emulates:"
+ echo "CONFIG_FW_LOADER=y"
+ echo "CONFIG_FW_LOADER_USER_HELPER=y"
+ echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n"
+ proc_set_force_sysfs_fallback 0
+ proc_set_ignore_sysfs_fallback 0
+ run_tests
+}
+
+run_test_config_0003()
+{
+ echo "-----------------------------------------------------"
+ echo "Running kernel configuration test 3 -- android"
+ echo "Emulates:"
+ echo "CONFIG_FW_LOADER=y"
+ echo "CONFIG_FW_LOADER_USER_HELPER=y"
+ echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y"
+ proc_set_force_sysfs_fallback 1
+ proc_set_ignore_sysfs_fallback 0
+ run_tests
+}
+
+check_mods
+check_setup
+
+if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then
+ run_test_config_0001
+ run_test_config_0002
+ run_test_config_0003
+else
+ echo "Running basic kernel configuration, working with your config"
+ run_test
+fi
--
2.16.2