Re: [PATCH v3 0/2] add support for Socionext SynQuacer I2C controller

[Ard Biesheuvel]

On 27 February 2018 at 15:59, Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote:
> On Tue, Feb 27, 2018 at 1:01 PM, Ard Biesheuvel
> <ard.biesheuvel@xxxxxxxxxx> wrote:
>> Add a binding and a driver for the I2C IP found in the Socionext SynQuacer
>> SoC, which is essentially a rebranded version of the Fujitsu F_I2C controller.
>>
>
> Thanks for an update!
> FWIW,
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
>

Thanks Andy


>> v3:
>> - incorporate more of Andy's review comments (#2), especially regarding the
>>   bus speed and clock source handling for ACPI
>> - patch #1 unchanged.
>>
>> v2:
>> - incorporate Andy's review comments (#2)
>> - patch #1 unchanged.
>>
>> Ard Biesheuvel (2):
>>   dt-bindings: i2c: add binding for Socionext SynQuacer I2C
>>   i2c: add support for Socionext SynQuacer I2C controller
>>
>>  Documentation/devicetree/bindings/i2c/i2c-synquacer.txt |  29 +
>>  drivers/i2c/busses/Kconfig                              |  10 +
>>  drivers/i2c/busses/Makefile                             |   1 +
>>  drivers/i2c/busses/i2c-synquacer.c                      | 787 ++++++++++++++++++++
>>  4 files changed, 827 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
>>  create mode 100644 drivers/i2c/busses/i2c-synquacer.c
>>
>> --
>> 2.11.0
>>
>
>
>
> --
> With Best Regards,
> Andy Shevchenko