[PATCH 3/6] Staging: iio: adis16209: Add _REG postfix for registers
From: Shreeya Patel
Date: Fri Mar 02 2018 - 08:26:10 EST
The defined names for registers does not make it very
clear that they are registers and hence, add _REG postfix.
This improves the readability of the code.
Signed-off-by: Shreeya Patel <shreeya.patel23498@xxxxxxxxx>
---
drivers/staging/iio/accel/adis16209.c | 85 ++++++++++++++++++-----------------
1 file changed, 43 insertions(+), 42 deletions(-)
diff --git a/drivers/staging/iio/accel/adis16209.c b/drivers/staging/iio/accel/adis16209.c
index 830c278..151120f 100644
--- a/drivers/staging/iio/accel/adis16209.c
+++ b/drivers/staging/iio/accel/adis16209.c
@@ -23,85 +23,85 @@
#define ADIS16209_STARTUP_DELAY_MS 220
/* Flash memory write count */
-#define ADIS16209_FLASH_CNT 0x00
+#define ADIS16209_FLASH_CNT_REG 0x00
/* Output, power supply */
-#define ADIS16209_SUPPLY_OUT 0x02
+#define ADIS16209_SUPPLY_OUT_REG 0x02
/* Output, x-axis accelerometer */
-#define ADIS16209_XACCL_OUT 0x04
+#define ADIS16209_XACCL_OUT_REG 0x04
/* Output, y-axis accelerometer */
-#define ADIS16209_YACCL_OUT 0x06
+#define ADIS16209_YACCL_OUT_REG 0x06
/* Output, auxiliary ADC input */
-#define ADIS16209_AUX_ADC 0x08
+#define ADIS16209_AUX_ADC_REG 0x08
/* Output, temperature */
-#define ADIS16209_TEMP_OUT 0x0A
+#define ADIS16209_TEMP_OUT_REG 0x0A
/* Output, x-axis inclination */
-#define ADIS16209_XINCL_OUT 0x0C
+#define ADIS16209_XINCL_OUT_REG 0x0C
/* Output, y-axis inclination */
-#define ADIS16209_YINCL_OUT 0x0E
+#define ADIS16209_YINCL_OUT_REG 0x0E
/* Output, +/-180 vertical rotational position */
-#define ADIS16209_ROT_OUT 0x10
+#define ADIS16209_ROT_OUT_REG 0x10
/* Calibration, x-axis acceleration offset null */
-#define ADIS16209_XACCL_NULL 0x12
+#define ADIS16209_XACCL_NULL_REG 0x12
/* Calibration, y-axis acceleration offset null */
-#define ADIS16209_YACCL_NULL 0x14
+#define ADIS16209_YACCL_NULL_REG 0x14
/* Calibration, x-axis inclination offset null */
-#define ADIS16209_XINCL_NULL 0x16
+#define ADIS16209_XINCL_NULL_REG 0x16
/* Calibration, y-axis inclination offset null */
-#define ADIS16209_YINCL_NULL 0x18
+#define ADIS16209_YINCL_NULL_REG 0x18
/* Calibration, vertical rotation offset null */
-#define ADIS16209_ROT_NULL 0x1A
+#define ADIS16209_ROT_NULL_REG 0x1A
/* Alarm 1 amplitude threshold */
-#define ADIS16209_ALM_MAG1 0x20
+#define ADIS16209_ALM_MAG1_REG 0x20
/* Alarm 2 amplitude threshold */
-#define ADIS16209_ALM_MAG2 0x22
+#define ADIS16209_ALM_MAG2_REG 0x22
/* Alarm 1, sample period */
-#define ADIS16209_ALM_SMPL1 0x24
+#define ADIS16209_ALM_SMPL1_REG 0x24
/* Alarm 2, sample period */
-#define ADIS16209_ALM_SMPL2 0x26
+#define ADIS16209_ALM_SMPL2_REG 0x26
/* Alarm control */
-#define ADIS16209_ALM_CTRL 0x28
+#define ADIS16209_ALM_CTRL_REG 0x28
/* Auxiliary DAC data */
-#define ADIS16209_AUX_DAC 0x30
+#define ADIS16209_AUX_DAC_REG 0x30
/* General-purpose digital input/output control */
-#define ADIS16209_GPIO_CTRL 0x32
+#define ADIS16209_GPIO_CTRL_REG 0x32
/* Miscellaneous control */
-#define ADIS16209_MSC_CTRL 0x34
+#define ADIS16209_MSC_CTRL_REG 0x34
/* Internal sample period (rate) control */
-#define ADIS16209_SMPL_PRD 0x36
+#define ADIS16209_SMPL_PRD_REG 0x36
/* Operation, filter configuration */
-#define ADIS16209_AVG_CNT 0x38
+#define ADIS16209_AVG_CNT_REG 0x38
/* Operation, sleep mode control */
-#define ADIS16209_SLP_CNT 0x3A
+#define ADIS16209_SLP_CNT_REG 0x3A
/* Diagnostics, system status register */
-#define ADIS16209_DIAG_STAT 0x3C
+#define ADIS16209_DIAG_STAT_REG 0x3C
/* Operation, system command register */
-#define ADIS16209_GLOB_CMD 0x3E
+#define ADIS16209_GLOB_CMD_REG 0x3E
/* MSC_CTRL */
@@ -165,10 +165,10 @@ enum adis16209_scan {
static const u8 adis16209_addresses[8][1] = {
[ADIS16209_SCAN_SUPPLY] = { },
[ADIS16209_SCAN_AUX_ADC] = { },
- [ADIS16209_SCAN_ACC_X] = { ADIS16209_XACCL_NULL },
- [ADIS16209_SCAN_ACC_Y] = { ADIS16209_YACCL_NULL },
- [ADIS16209_SCAN_INCLI_X] = { ADIS16209_XINCL_NULL },
- [ADIS16209_SCAN_INCLI_Y] = { ADIS16209_YINCL_NULL },
+ [ADIS16209_SCAN_ACC_X] = { ADIS16209_XACCL_NULL_REG },
+ [ADIS16209_SCAN_ACC_Y] = { ADIS16209_YACCL_NULL_REG },
+ [ADIS16209_SCAN_INCLI_X] = { ADIS16209_XINCL_NULL_REG },
+ [ADIS16209_SCAN_INCLI_Y] = { ADIS16209_YINCL_NULL_REG },
[ADIS16209_SCAN_ROT] = { },
[ADIS16209_SCAN_TEMP] = { },
};
@@ -266,18 +266,19 @@ static int adis16209_read_raw(struct iio_dev *indio_dev,
}
static const struct iio_chan_spec adis16209_channels[] = {
- ADIS_SUPPLY_CHAN(ADIS16209_SUPPLY_OUT, ADIS16209_SCAN_SUPPLY, 0, 14),
- ADIS_TEMP_CHAN(ADIS16209_TEMP_OUT, ADIS16209_SCAN_TEMP, 0, 12),
- ADIS_ACCEL_CHAN(X, ADIS16209_XACCL_OUT, ADIS16209_SCAN_ACC_X,
+ ADIS_SUPPLY_CHAN(ADIS16209_SUPPLY_OUT_REG, ADIS16209_SCAN_SUPPLY,
+ 0, 14),
+ ADIS_TEMP_CHAN(ADIS16209_TEMP_OUT_REG, ADIS16209_SCAN_TEMP, 0, 12),
+ ADIS_ACCEL_CHAN(X, ADIS16209_XACCL_OUT_REG, ADIS16209_SCAN_ACC_X,
BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
- ADIS_ACCEL_CHAN(Y, ADIS16209_YACCL_OUT, ADIS16209_SCAN_ACC_Y,
+ ADIS_ACCEL_CHAN(Y, ADIS16209_YACCL_OUT_REG, ADIS16209_SCAN_ACC_Y,
BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
- ADIS_AUX_ADC_CHAN(ADIS16209_AUX_ADC, ADIS16209_SCAN_AUX_ADC, 0, 12),
- ADIS_INCLI_CHAN(X, ADIS16209_XINCL_OUT, ADIS16209_SCAN_INCLI_X,
+ ADIS_AUX_ADC_CHAN(ADIS16209_AUX_ADC_REG, ADIS16209_SCAN_AUX_ADC, 0, 12),
+ ADIS_INCLI_CHAN(X, ADIS16209_XINCL_OUT_REG, ADIS16209_SCAN_INCLI_X,
0, 0, 14),
- ADIS_INCLI_CHAN(Y, ADIS16209_YINCL_OUT, ADIS16209_SCAN_INCLI_Y,
+ ADIS_INCLI_CHAN(Y, ADIS16209_YINCL_OUT_REG, ADIS16209_SCAN_INCLI_Y,
0, 0, 14),
- ADIS_ROT_CHAN(X, ADIS16209_ROT_OUT, ADIS16209_SCAN_ROT, 0, 0, 14),
+ ADIS_ROT_CHAN(X, ADIS16209_ROT_OUT_REG, ADIS16209_SCAN_ROT, 0, 0, 14),
IIO_CHAN_SOFT_TIMESTAMP(8)
};
@@ -297,9 +298,9 @@ static const char * const adis16209_status_error_msgs[] = {
static const struct adis_data adis16209_data = {
.read_delay = 30,
- .msc_ctrl_reg = ADIS16209_MSC_CTRL,
- .glob_cmd_reg = ADIS16209_GLOB_CMD,
- .diag_stat_reg = ADIS16209_DIAG_STAT,
+ .msc_ctrl_reg = ADIS16209_MSC_CTRL_REG,
+ .glob_cmd_reg = ADIS16209_GLOB_CMD_REG,
+ .diag_stat_reg = ADIS16209_DIAG_STAT_REG,
.self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN,
.self_test_no_autoclear = true,
--
2.7.4