Re: [PATCH 5/6] dt-bindings: phy-qcom-usb2: Update bindings for sdm845

[Vivek Gautam]

Hi Manu,


On 3/16/2018 3:14 PM, Manu Gautam wrote:
> Update compatible strings for USB2 PHYs on sdm845.
> There are two QUSB2 PHYs present on sdm845. Few PHY registers
> programming is different for these PHYs related to electrical
> parameters, otherwise both are same.
>
> Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
> ---
>   Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 4 +++-
>   1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
> index 42c9742..20deaeb 100644
> --- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
> @@ -6,7 +6,9 @@ QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
>   Required properties:
>    - compatible: compatible list, contains
>   	       "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
> -	       "qcom,qusb2-v2-phy" for QUSB2 V2 PHY.
> +	       "qcom,qusb2-v2-phy" for QUSB2 V2 PHY,
> +	       "qcom,sdm845-1-qusb2-phy" for primary PHY on sdm845,
> +	       "qcom,sdm845-2-qusb2-phy" for secondary PHY on sdm845.

Thanks for the patch.

"qcom,sdm845-1/2-qusb2-phy" gives an impression that it is different versions of SoC,
and not like two numbers of phy.
May be - "qcom,sdm845-qusb2-phy-1/2"

Regards
Vivek
 

>   
>    - reg: offset and length of the PHY register set.
>    - #phy-cells: must be 0.