[PATCH v3 5/6] ARM: dts: Add generic interconnect target module node for MCAN
From: Faiz Abbas
Date: Wed Jun 06 2018 - 02:08:34 EST
The ti-sysc driver provides support for manipulating the idle modes
and interconnect level resets.
Add the generic interconnect target module node for MCAN to support
the same.
CC: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
---
arch/arm/boot/dts/dra76x.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index bfc82636999c..5157cc431574 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -11,6 +11,24 @@
/ {
compatible = "ti,dra762", "ti,dra7";
+ ocp {
+ target-module@42c01900 {
+ compatible = "ti,sysc-dra7-mcan", "ti,sysc";
+ ranges = <0x0 0x42c00000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x42c01900 0x4>,
+ <0x42c01904 0x4>,
+ <0x42c01908 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
+ SYSC_DRA7_MCAN_ENAWAKEUP)>;
+ ti,syss-mask = <1>;
+ clocks = <&wkupaon_clkctrl DRA7_ADC_CLKCTRL 0>;
+ clock-names = "fck";
+ };
+ };
+
};
/* MCAN interrupts are hard-wired to irqs 67, 68 */
--
2.17.0