Re: [PATCH] parport: Add support for the WCH384 4S multi-IO card

[Matt Turner]

On Sat, May 26, 2018 at 12:35 PM, Matt Turner <mattst88@xxxxxxxxx> wrote:
> This Multi-IO card has one serial 16550-like serial connectors. Here's
> the lspci output, after this commit is applied:
>
> 01:00.0 Serial controller [0700]: Device [1c00:3470] (rev 10) (prog-if 05 [16850])
>         Subsystem: Device [1c00:3470]
>         Flags: fast devsel, IRQ 16
>         I/O ports at e000 [size=256]
>         Memory at f0100000 (32-bit, prefetchable) [size=32K]
>         I/O ports at e100 [size=4]
>         Expansion ROM at f7d00000 [disabled] [size=32K]
>         Capabilities: [60] Power Management version 3
>         Capabilities: [68] MSI: Enable- Count=1/32 Maskable+ 64bit+
>         Capabilities: [80] Express Legacy Endpoint, MSI 00
>         Capabilities: [100] Advanced Error Reporting
>         Kernel driver in use: parport_serial
>
> This card was already added to the blacklist of 8250_pci.c in commit
> 72a3c0e4e662 ("tty: Add support for the WCH384 4S multi-IO card").
>
> Cc: Sergej Pupykin <ml@xxxxxxxxxxxx>
> Signed-off-by: Matt Turner <mattst88@xxxxxxxxx>
> ---

Hi,

Can I expect this to be picked up for the 4.18 merge window?

Matt