Re: [PATCH v1 12/15] drm/mediatek: add layer number condition for RDMA to control plane

[Stu Hsieh]

Hi, CK:

On Wed, 2018-07-25 at 11:02 +0800, CK Hu wrote:
> Hi, Stu:
> 
> On Tue, 2018-07-24 at 16:17 +0800, Stu Hsieh wrote:
> > This patch add layer number condition for RDMA to control plane
> > 
> > When plane init in crtc create,
> > it use the number of OVL layer to init plane.
> > That's OVL can read 4 memory address.
> > 
> > For mt2712 third ddp, it use RDMA to read memory.
> > RDMA can read 1 memory address, so it just init one plane.
> > 
> > For compatibility, this patch use two define OVL_LAYER_NR and
> > RDMA_LAYER_NR to distingush two difference HW engine.
> > 
> > Signed-off-by: Stu Hsieh <stu.hsieh@xxxxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 25 +++++++++++++++++--------
> >  drivers/gpu/drm/mediatek/mtk_drm_crtc.h |  2 ++
> >  2 files changed, 19 insertions(+), 8 deletions(-)
> > 
> 
> [...]
> 
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> > index 9d9410c67ae9..b44fefadf14a 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> > @@ -18,7 +18,9 @@
> >  #include "mtk_drm_ddp_comp.h"
> >  #include "mtk_drm_plane.h"
> >  
> > +#define MAX_LAYER_NR	4
> >  #define OVL_LAYER_NR	4
> > +#define RDMA_LAYER_NR	1
> >  #define MTK_LUT_SIZE	512
> >  #define MTK_MAX_BPC	10
> >  #define MTK_MIN_BPC	3
> 
> If the layer number is not fixed in '4', I would like to get this value
> from component because in some SoC, OVL may have 6 layer. So add an
> interface to get the max layer number and OVL, RDMA driver would return
> the number for this SoC.
> 
> Regards,
> CK
> 
OK

Regards,
Stu

>