[GIT PULL] libata changes for v4.19-rc1

From: Tejun Heo
Date: Fri Aug 24 2018 - 14:54:03 EST


Hello, again.

Nothing too interesting. Mostly ahci and ahci_platform changes, many
around power management.

Thanks.

The following changes since commit 9ffc59d57228d74809700be6f7ecb1db10292f05:

Merge tag '4.18-rc1-more-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6 (2018-06-18 14:28:19 +0900)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git for-4.19

for you to fetch changes up to 2d17f460c5d79fa9fc794e813377f3276acf81ce:

ata: ahci_platform: enable to get and control reset (2018-08-22 08:08:28 -0700)

----------------------------------------------------------------
Corentin Labbe (4):
ata: ahci_platform: correct parameter documentation for ahci_platform_shutdown
ata: ahci_platform: convert kzallloc to kcalloc
ata: ahci_platform: convert kcalloc to devm_kcalloc
Revert "ata: ahci_platform: convert kcalloc to devm_kcalloc"

Geert Uytterhoeven (2):
ata: sata_rcar: Provide a short-hand for &pdev->dev
ata: sata_rcar: Add rudimentary Runtime PM support

Kunihiko Hayashi (3):
ata: add an extra argument to ahci_platform_get_resources()
ata: libahci_platform: add reset control support
ata: ahci_platform: enable to get and control reset

Masaharu Hayakawa (1):
ata: sata_rcar: exclude setting of PHY registers in Gen3

Paul Menzel (2):
ata: Guard ata_scsi_dump_cdb() by ATA_VERBOSE_DEBUG
ata: Only output sg element mapped number in verbose debug

Samuel Morris (2):
ata: ahci: rpm_put port on port_stop to match rpm_get in port_start
ata: ahci_platform: allow disabling of hotplug to save power

Sebastian Andrzej Siewior (1):
libata: remove ata_sff_data_xfer_noirq()

Srinivas Pandruvada (4):
ata: ahci: Support state with min power but Partial low power state
ata: ahci: Enable DEVSLP by default on x86 with SLP_S0
ata: libahci: Correct setting of DEVSLP register
ata: libahci: Allow reconfigure of DEVSLP register

Tejun Heo (1):
Revert "ata: ahci_platform: allow disabling of hotplug to save power"

Wolfram Sang (2):
ata: sata_rcar: really mask all interrupts on Gen2 and later
ata: sata_rcar: Add r8a77965 support

.../devicetree/bindings/ata/ahci-platform.txt | 1 +
.../devicetree/bindings/ata/sata_rcar.txt | 1 +
Documentation/driver-api/libata.rst | 3 +-
drivers/ata/ahci.c | 38 +++++++++--
drivers/ata/ahci.h | 1 +
drivers/ata/ahci_brcm.c | 2 +-
drivers/ata/ahci_ceva.c | 2 +-
drivers/ata/ahci_da850.c | 2 +-
drivers/ata/ahci_dm816.c | 2 +-
drivers/ata/ahci_imx.c | 2 +-
drivers/ata/ahci_mtk.c | 2 +-
drivers/ata/ahci_mvebu.c | 2 +-
drivers/ata/ahci_platform.c | 3 +-
drivers/ata/ahci_qoriq.c | 2 +-
drivers/ata/ahci_seattle.c | 2 +-
drivers/ata/ahci_st.c | 2 +-
drivers/ata/ahci_sunxi.c | 2 +-
drivers/ata/ahci_tegra.c | 2 +-
drivers/ata/ahci_xgene.c | 2 +-
drivers/ata/libahci.c | 27 +++++---
drivers/ata/libahci_platform.c | 49 ++++++++++----
drivers/ata/libata-core.c | 3 +-
drivers/ata/libata-scsi.c | 5 +-
drivers/ata/libata-sff.c | 30 ---------
drivers/ata/pata_cmd640.c | 2 +-
drivers/ata/pata_icside.c | 2 +-
drivers/ata/pata_imx.c | 2 +-
drivers/ata/pata_legacy.c | 6 +-
drivers/ata/pata_palmld.c | 2 +-
drivers/ata/pata_pcmcia.c | 2 +-
drivers/ata/pata_platform.c | 2 +-
drivers/ata/pata_via.c | 2 +-
drivers/ata/sata_rcar.c | 76 +++++++++++-----------
include/linux/ahci_platform.h | 4 +-
include/linux/libata.h | 5 +-
35 files changed, 166 insertions(+), 126 deletions(-)

--
tejun