Re: [PATCH v3 21/30] iio: adc: sun4i-gpadc-iio: add support for H3 thermal sensor

[Maxime Ripard]

On Thu, Aug 30, 2018 at 05:45:09PM +0200, Philipp Rossak wrote:
> This patch adds support for the H3 ths sensor.
> 
> The H3 supports interrupts. The interrupt is configured to update the
> the sensor values every second. The calibration data is writen at the
> begin of the init process.
> 
> Signed-off-by: Philipp Rossak <embed3d@xxxxxxxxx>
> ---
>  drivers/iio/adc/sun4i-gpadc-iio.c   | 91 +++++++++++++++++++++++++++++++++++++
>  include/linux/iio/adc/sun4i-gpadc.h | 18 ++++++++
>  2 files changed, 109 insertions(+)
> 
> diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
> index c7b46c82e3e5..d5c7971b2558 100644
> --- a/drivers/iio/adc/sun4i-gpadc-iio.c
> +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
> @@ -72,6 +72,7 @@ struct gpadc_data {
>  	u32		temp_data_base;
>  	int		sensor_count;
>  	bool		supports_nvmem;
> +	u32		ths_irq_clear;
>  };
>  
>  static irqreturn_t sun4i_gpadc_data_irq_handler(int irq, void *dev_id);
> @@ -79,6 +80,10 @@ static irqreturn_t sun4i_gpadc_data_irq_handler(int irq, void *dev_id);
>  static int sun4i_ths_resume(struct sun4i_gpadc_iio *info);
>  static int sun4i_ths_suspend(struct sun4i_gpadc_iio *info);
>  
> +static int sun8i_h3_ths_resume(struct sun4i_gpadc_iio *info);
> +static int sun8i_h3_ths_suspend(struct sun4i_gpadc_iio *info);
> +static irqreturn_t sunx8i_h3_irq_thread(int irq, void *data);
> +
>  static const struct gpadc_data sun4i_gpadc_data = {
>  	.temp_offset = -1932,
>  	.temp_scale = 133,
> @@ -137,6 +142,22 @@ static const struct gpadc_data sun8i_a33_gpadc_data = {
>  	.sensor_count = 1,
>  };
>  
> +static const struct gpadc_data sun8i_h3_ths_data = {
> +	.temp_offset = -1791,
> +	.temp_scale = -121,
> +	.temp_data_base = SUN8I_H3_THS_TDATA0,
> +	.ths_irq_thread = sunx8i_h3_irq_thread,
> +	.support_irq = true,
> +	.has_bus_clk = true,
> +	.has_bus_rst = true,
> +	.has_mod_clk = true,
> +	.sensor_count = 1,
> +	.supports_nvmem = true,
> +	.ths_resume = sun8i_h3_ths_resume,
> +	.ths_suspend = sun8i_h3_ths_suspend,
> +	.ths_irq_clear = SUN8I_H3_THS_INTS_TDATA_IRQ_0,
> +};
> +
>  struct sun4i_sensor_tzd {
>  	struct sun4i_gpadc_iio		*info;
>  	struct thermal_zone_device	*tzd;
> @@ -409,6 +430,31 @@ static irqreturn_t sun4i_gpadc_data_irq_handler(int irq, void *dev_id)
>  	return IRQ_HANDLED;
>  }
>  
> +static irqreturn_t sunx8i_h3_irq_thread(int irq, void *data)
> +{
> +	struct sun4i_gpadc_iio *info = data;
> +	int i;
> +
> +	regmap_write(info->regmap, SUN8I_H3_THS_STAT,
> +			info->data->ths_irq_clear);
> +
> +	for (i = 0; i < info->data->sensor_count; i++)
> +		thermal_zone_device_update(info->tzds[i].tzd,
> +						THERMAL_EVENT_TEMP_SAMPLE);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int sun8i_h3_calibrate(struct sun4i_gpadc_iio *info)
> +{
> +//	regmap_write(info->regmap, SUNXI_THS_CDATA_0_1,
> +//			info->calibration_data[0]);
> +//	regmap_write(info->regmap, SUNXI_THS_CDATA_2_3,
> +//			info->calibration_data[1]);

Don't put commented code.

> +
> +	return 0;
> +}
> +
>  static int sun4i_gpadc_runtime_suspend(struct device *dev)
>  {
>  	struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
> @@ -428,6 +474,16 @@ static int sun4i_ths_suspend(struct sun4i_gpadc_iio *info)
>  	return 0;
>  }
>  
> +static int sun8i_h3_ths_suspend(struct sun4i_gpadc_iio *info)
> +{
> +	/* Disable ths interrupt */
> +	regmap_write(info->regmap, SUN8I_H3_THS_INTC, 0x0);
> +	/* Disable temperature sensor */
> +	regmap_write(info->regmap, SUN8I_H3_THS_CTRL2, 0x0);
> +
> +	return 0;
> +}
> +
>  static int sun4i_gpadc_runtime_resume(struct device *dev)
>  {
>  	struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
> @@ -454,6 +510,37 @@ static int sun4i_ths_resume(struct sun4i_gpadc_iio *info)
>  	return 0;
>  }
>  
> +static int sun8i_h3_ths_resume(struct sun4i_gpadc_iio *info)
> +{
> +	u32 value;
> +
> +	sun8i_h3_calibrate(info);
> +
> +	regmap_write(info->regmap, SUN8I_H3_THS_CTRL0,
> +			SUN4I_GPADC_CTRL0_T_ACQ(0xff));
> +
> +	regmap_write(info->regmap, SUN8I_H3_THS_CTRL2,
> +			SUN8I_H3_THS_ACQ1(0x3f));
> +
> +	regmap_write(info->regmap, SUN8I_H3_THS_STAT,
> +			SUN8I_H3_THS_INTS_TDATA_IRQ_0);
> +
> +	regmap_write(info->regmap, SUN8I_H3_THS_FILTER,
> +			SUN4I_GPADC_CTRL3_FILTER_EN |
> +			SUN4I_GPADC_CTRL3_FILTER_TYPE(0x2));
> +
> +	regmap_write(info->regmap, SUN8I_H3_THS_INTC,
> +			SUN8I_H3_THS_INTC_TDATA_IRQ_EN0 |
> +			SUN8I_H3_THS_TEMP_PERIOD(0x55));
> +
> +	regmap_read(info->regmap, SUN8I_H3_THS_CTRL2, &value);
> +
> +	regmap_write(info->regmap, SUN8I_H3_THS_CTRL2,
> +			SUN8I_H3_THS_TEMP_SENSE_EN0 | value);

Ideally, all these values should have a comment explaining what they
are.

And we really start to have a lot of registers defines. We'd be better
off using regmap_fields.

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature