Re: [PATCH 1/3] ARM: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974

[Bjorn Andersson]

On Fri 31 Aug 15:46 PDT 2018, Frank Rowand wrote:
> > +		spmi_bus: spmi@fc4cf000 {
> > +			compatible = "qcom,spmi-pmic-arb";
> > +			reg-names = "core", "intr", "cnfg";
> > +			reg = <0xfc4cf000 0x1000>,
> > +			      <0xfc4cb000 0x1000>,
> > +			      <0xfc4ca000 0x1000>;
> > +			interrupt-names = "periph_irq";
> 
> > +			interrupts = <0 190 0>;
> 
> The final value in this interrupts property means IRQ_TYPE_NONE.
> 
> A WARN_ON() was added early this year to complain about use of
> IRQ_TYPE_NONE: 83a86fbb5b56 "irqchip/gic: Loudly complain about
> the use of IRQ_TYPE_NONE", resulting in many warnings spewing
> forth when I boot an APQ8074 Dragonboard.  I am trying to
> determine whether the warning is overly aggressive, or whether
> the IRQ TYPE is incorrectly specified for the spmi node.
> 
> The interrupt-parent for the spmi node is intc: interrupt-controller@f9000000,
> which has compatible = "qcom,msm-qgic2".  I do not know the architecture
> or implementation of this interrupt controller.  Is an IRQ_TYPE_NONE
> valid in this case, or should a specific type be provided?
> 

No, IRQ_TYPE_NONE isn't valid and the WARN_ON() is reasonable.

Please change it to IRQ_TYPE_LEVEL_HIGH. And while you're at it, replace
the first 0 with GIC_SPI.


If you have more of these warnings you can most likely look at e.g.
msm8916 (arm64) to find the right flags.

Regards,
Bjorn