Re: [PATCH] HID: i2c-hid: Add a small delay after powering on/off the device

[Jiri Kosina]

On Mon, 1 Oct 2018, Kai-Heng Feng wrote:

> Raydium touchpanel (2386:4B33) sometimes does not workin desktop session
> although it works in display manager.
> 
> During user logging, the display manager exits, close the HID device,
> then the device gets runtime suspended and powered off. The desktop
> session begins shortly after, opens the HID device, then the device gets
> runtime resumed and powered on.
> 
> If the trasition from display manager to desktop sesesion is fast, the
> touchpanel cannot switch from powered off to powered on in short
> timeframe. So add a small delay to workaround the issue.
> 
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> ---
>  drivers/hid/i2c-hid/i2c-hid.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
> index f3076659361a..ff5682cc1bce 100644
> --- a/drivers/hid/i2c-hid/i2c-hid.c
> +++ b/drivers/hid/i2c-hid/i2c-hid.c
> @@ -409,6 +409,8 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
>  
>  	if (ret)
>  		dev_err(&client->dev, "failed to change power setting.\n");
> +	else
> +		msleep(20);

In case there really is no other way around it, at least please add 
comment explaining why this ugly msleep() is there. Thanks,

-- 
Jiri Kosina
SUSE Labs