Re: [PATCH] HID: i2c-hid: Add a small delay after powering on/off the device

[Kai Heng Feng]

> On Oct 3, 2018, at 5:10 PM, Jiri Kosina <jikos@xxxxxxxxxx> wrote:
> 
> On Mon, 1 Oct 2018, Kai-Heng Feng wrote:
> 
>> Raydium touchpanel (2386:4B33) sometimes does not workin desktop session
>> although it works in display manager.
>> 
>> During user logging, the display manager exits, close the HID device,
>> then the device gets runtime suspended and powered off. The desktop
>> session begins shortly after, opens the HID device, then the device gets
>> runtime resumed and powered on.
>> 
>> If the trasition from display manager to desktop sesesion is fast, the
>> touchpanel cannot switch from powered off to powered on in short
>> timeframe. So add a small delay to workaround the issue.
>> 
>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
>> ---
>> drivers/hid/i2c-hid/i2c-hid.c | 2 ++
>> 1 file changed, 2 insertions(+)
>> 
>> diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
>> index f3076659361a..ff5682cc1bce 100644
>> --- a/drivers/hid/i2c-hid/i2c-hid.c
>> +++ b/drivers/hid/i2c-hid/i2c-hid.c
>> @@ -409,6 +409,8 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
>> 
>> 	if (ret)
>> 		dev_err(&client->dev, "failed to change power setting.\n");
>> +	else
>> +		msleep(20);
> 
> In case there really is no other way around it, at least please add 
> comment explaining why this ugly msleep() is there. Thanks,

I am working on a better approach for this issue, Iâll send a v2 soon.

Kai-Heng

> 
> -- 
> Jiri Kosina
> SUSE Labs
>