Re: [PATCH 0/2] Add SECO Boards CEC device driver

[Neil Armstrong]

Hi Ettore,

On 02/10/2018 18:59, ektor5 wrote:
> This series of patches aims to add CEC functionalities to SECO
> devices, in particular UDOO X86.
> 
> The communication is achieved via Braswell SMBus (i2c-i801) to the
> onboard STM32 microcontroller that handles the CEC signals. The driver
> use direct access to the PCI addresses, due to the limitations of the
> specific driver in presence of ACPI calls.
> 
> The basic functionalities are tested with success with cec-ctl and
> cec-compliance.

Glad to see another user of the i915 cec notifier !

Neil

> 
> Ettore Chimenti (2):
>   media: add SECO cec driver
>   seco-cec: add Consumer-IR support
> 
>  MAINTAINERS                                |   6 +
>  drivers/media/platform/Kconfig             |  21 +
>  drivers/media/platform/Makefile            |   4 +
>  drivers/media/platform/seco-cec/Makefile   |   1 +
>  drivers/media/platform/seco-cec/seco-cec.c | 859 +++++++++++++++++++++
>  drivers/media/platform/seco-cec/seco-cec.h | 143 ++++
>  6 files changed, 1034 insertions(+)
>  create mode 100644 drivers/media/platform/seco-cec/Makefile
>  create mode 100644 drivers/media/platform/seco-cec/seco-cec.c
>  create mode 100644 drivers/media/platform/seco-cec/seco-cec.h
>