Re: [PATCH 0/2] Add SECO Boards CEC device driver

[ektor5]

On Thu, Oct 04, 2018 at 02:29:32PM +0200, Neil Armstrong wrote:
> Hi Ettore,
> 
> On 02/10/2018 18:59, ektor5 wrote:
> > This series of patches aims to add CEC functionalities to SECO
> > devices, in particular UDOO X86.
> > 
> > The communication is achieved via Braswell SMBus (i2c-i801) to the
> > onboard STM32 microcontroller that handles the CEC signals. The driver
> > use direct access to the PCI addresses, due to the limitations of the
> > specific driver in presence of ACPI calls.
> > 
> > The basic functionalities are tested with success with cec-ctl and
> > cec-compliance.
> 
> Glad to see another user of the i915 cec notifier !

Thanks to you for the patch! It works really well!

Ettore

> 
> Neil
> 
> > 
> > Ettore Chimenti (2):
> >   media: add SECO cec driver
> >   seco-cec: add Consumer-IR support
> > 
> >  MAINTAINERS                                |   6 +
> >  drivers/media/platform/Kconfig             |  21 +
> >  drivers/media/platform/Makefile            |   4 +
> >  drivers/media/platform/seco-cec/Makefile   |   1 +
> >  drivers/media/platform/seco-cec/seco-cec.c | 859 +++++++++++++++++++++
> >  drivers/media/platform/seco-cec/seco-cec.h | 143 ++++
> >  6 files changed, 1034 insertions(+)
> >  create mode 100644 drivers/media/platform/seco-cec/Makefile
> >  create mode 100644 drivers/media/platform/seco-cec/seco-cec.c
> >  create mode 100644 drivers/media/platform/seco-cec/seco-cec.h
> > 
>