Re: [PATCHv5 0/6] Add support for UHS-I on Exynos5422 odroid boards

[Ulf Hansson]

On 27 September 2018 at 16:07, Anand Moon <linux.amoon@xxxxxxxxx> wrote:
> This is series v4 since my previous patches were incomplete with driver
> changes missing.
>
> v5 changes.
> drop the cd-gpios wp-gpio gpio pin setting, just add the pinctrl
> configration to support write protect.
>
> v4 changes.
> squash cd-gpios and wp-gpio changes into single patch.
> change the subject prefix to "ARM: dts: exynos:"
>
> These changes add UHS-I tuning for dw_mmc-exynos driver.
>
> Rebased on Krzysztof branch next/dt
> [0] git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git
>
> Anand Moon (6):
>   ARM: dts: exynos: Added UHS-I bus speed support
>   ARM: dts: exynos: fix regulator min values of LDO13 for Odroid XU3/XU4
>   ARM: dts: exynos: update maximum frequency for sdcard to 200MHz
>   ARM: dts: exynos: Add pin configuration for SD write protect on Odroid
>     XU3/XU4
>   ARM: dts: exynos: update maximum frequency for emmc to 200MHz
>   mmc: dw_mmc-exynos: Add tuning for sdr and ddr timing for USH-I mode
>
>  arch/arm/boot/dts/exynos5420-pinctrl.dtsi          |  7 +++++++
>  arch/arm/boot/dts/exynos5422-odroid-core.dtsi      |  8 ++++++--
>  arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi |  1 +
>  drivers/mmc/host/dw_mmc-exynos.c                   | 11 +++++++++++
>  4 files changed, 25 insertions(+), 2 deletions(-)
>
> --
> 2.17.1
>

Anand,

I have applied the mmc patch for next, thanks!

In regards to the DTS changes, I assume the soc maintainers will pick
them up, but maybe you need to resend them separately.

Kind regards
Uffe