Re: [PATCH v1 2/2] mmc: mediatek: add bus_clk control

From: Ulf Hansson
Date: Mon Oct 08 2018 - 07:51:59 EST


On 29 September 2018 at 04:29, Chaotian Jing <chaotian.jing@xxxxxxxxxxxx> wrote:
> when gate MSDC0_HCLK, access register will hang, even the MSDC driver
> will never accessing register after HCLK was gated, but for safety, need
> gate the bus_clk(which used to access register) too.
>
> Signed-off-by: Chaotian Jing <chaotian.jing@xxxxxxxxxxxx>

Applied for next, thanks!

Kind regards
Uffe

> ---
> drivers/mmc/host/mtk-sd.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 0484138..1c1c967 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -387,6 +387,7 @@ struct msdc_host {
>
> struct clk *src_clk; /* msdc source clock */
> struct clk *h_clk; /* msdc h_clk */
> + struct clk *bus_clk; /* bus clock which used to access register */
> struct clk *src_clk_cg; /* msdc source clock control gate */
> u32 mclk; /* mmc subsystem clock frequency */
> u32 src_clk_freq; /* source clock frequency */
> @@ -660,12 +661,14 @@ static void msdc_gate_clock(struct msdc_host *host)
> {
> clk_disable_unprepare(host->src_clk_cg);
> clk_disable_unprepare(host->src_clk);
> + clk_disable_unprepare(host->bus_clk);
> clk_disable_unprepare(host->h_clk);
> }
>
> static void msdc_ungate_clock(struct msdc_host *host)
> {
> clk_prepare_enable(host->h_clk);
> + clk_prepare_enable(host->bus_clk);
> clk_prepare_enable(host->src_clk);
> clk_prepare_enable(host->src_clk_cg);
> while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
> @@ -1900,6 +1903,9 @@ static int msdc_drv_probe(struct platform_device *pdev)
> goto host_free;
> }
>
> + host->bus_clk = devm_clk_get(&pdev->dev, "bus_clk");
> + if (IS_ERR(host->bus_clk))
> + host->bus_clk = NULL;
> /*source clock control gate is optional clock*/
> host->src_clk_cg = devm_clk_get(&pdev->dev, "source_cg");
> if (IS_ERR(host->src_clk_cg))
> --
> 1.8.1.1.dirty
>