[PATCH v4 2/5] hwmon: (ina3221) Check channel status for alarms attribute read

From: Nicolin Chen
Date: Thu Oct 25 2018 - 19:59:21 EST


There is nothing critically wrong to read these two attributes
without having a is_enabled() check at this point. But reading
the MASK_ENABLE register would clear the CVRF bit according to
the datasheet. So it'd be safer to fence for disabled channels
in order to add pm runtime feature.

Signed-off-by: Nicolin Chen <nicoleotsuka@xxxxxxxxx>
---
Changelog
v2->v4:
* N/A
v1->v2:
* Returned 0 for alert flags instead of -ENODATA

drivers/hwmon/ina3221.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c
index d61688f04594..26cdf3342d80 100644
--- a/drivers/hwmon/ina3221.c
+++ b/drivers/hwmon/ina3221.c
@@ -200,6 +200,12 @@ static int ina3221_read_curr(struct device *dev, u32 attr,
return 0;
case hwmon_curr_crit_alarm:
case hwmon_curr_max_alarm:
+ /* No actual register read if channel is disabled */
+ if (!ina3221_is_enabled(ina, channel)) {
+ /* Return 0 for alert flags */
+ *val = 0;
+ return 0;
+ }
ret = regmap_field_read(ina->fields[reg], &regval);
if (ret)
return ret;
--
2.17.1