Re: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support

[Simon Horman]

On Thu, Nov 08, 2018 at 11:25:23AM +0000, Fabrizio Castro wrote:
> Dear All,
> 
> Who is the best person to take this patch?

I believe this one is for Marc.

> Thanks,
> Fab
> 
> > From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
> > Sent: 10 September 2018 11:43
> > Subject: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support
> >
> > Document RZ/G2M (r8a774a1) SoC specific bindings.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
> > Signed-off-by: Chris Paterson <Chris.Paterson2@xxxxxxxxxxx>
> > Reviewed-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
> > ---
> > v1->v2:
> > * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description
> >   as per Geert's comments.
> >
> > This patch applies on top of next-20180910.
> >
> >  Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++-----
> >  1 file changed, 13 insertions(+), 5 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > index 94a7f33..f3b160c 100644
> > --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > @@ -4,6 +4,7 @@ Renesas R-Car CAN controller Device Tree Bindings
> >  Required properties:
> >  - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
> >        "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
> > +      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
> >        "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
> >        "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
> >        "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
> > @@ -16,15 +17,21 @@ Required properties:
> >        "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
> >        "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
> >        compatible device.
> > -      "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
> > +      "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
> > +      compatible device.
> >        When compatible with the generic version, nodes must list the
> >        SoC-specific version corresponding to the platform first
> >        followed by the generic version.
> >
> >  - reg: physical base address and size of the R-Car CAN register map.
> >  - interrupts: interrupt specifier for the sole interrupt.
> > -- clocks: phandles and clock specifiers for 3 CAN clock inputs.
> > -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
> > +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
> > +  devices.
> > +  phandles and clock specifiers for 3 CAN clock inputs for every other
> > +  SoC.
> > +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
> > +       3 clock input name strings for every other SoC: "clkp1", "clkp2",
> > +       "can_clk".
> >  - pinctrl-0: pin control group to be used for this controller.
> >  - pinctrl-names: must be "default".
> >
> > @@ -41,8 +48,9 @@ using the below properties:
> >  Optional properties:
> >  - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
> >      <0x0> (default) : Peripheral clock (clkp1)
> > -    <0x1> : Peripheral clock (clkp2)
> > -    <0x3> : Externally input clock
> > +    <0x1> : Peripheral clock (clkp2) (not supported by
> > +    RZ/G2 devices)
> > +    <0x3> : External input clock
> >
> >  Example
> >  -------
> > --
> > 2.7.4
> 
> 
> 
> 
> Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
>