[PATCH v3 0/3] Add driver for Synopsys DesignWare I3C master IP

[Vitor soares]

This patch series is a proposal for the I3C master driver for Synopsys IP.
This patch is to be applied on top of I3C subsystem RFC V10 submitted by
Boris Brezillon.

Supported features:
  Regular CCC commands.
  I3C private transfers.
  I2C transfers.

Missing functionalities:
  Support DMA interface.
  Support for I3C_BUS_MODE_MIXED_SLOW.
  Hot-join.
  IBI.

Main change between v2 and v3:
- Minor fixes. They are described in each patch

Main change between v1 and v2:
- Add controller version on dt-binding
- The driver now calls writesl/readsl() instead readl/writel
- Rename some variables in the driver

Vitor soares (3):
  i3c: master: Add driver for Synopsys DesignWare IP
  dt-bindings: i3c: Document Synopsys DesignWare I3C master bindings
  MAINTAINERS: Add myself as the dw-i3c-master module maintainer

 .../devicetree/bindings/i3c/snps,dw-i3c-master.txt |   42 +
 MAINTAINERS                                        |    6 +
 drivers/i3c/master/Kconfig                         |   15 +
 drivers/i3c/master/Makefile                        |    1 +
 drivers/i3c/master/dw-i3c-master.c                 | 1216 ++++++++++++++++++++
 5 files changed, 1280 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
 create mode 100644 drivers/i3c/master/dw-i3c-master.c

-- 
2.7.4