[ANNOUNCE] v4.19.1-rt3
From: Sebastian Andrzej Siewior
Date: Fri Nov 09 2018 - 09:55:08 EST
Dear RT folks!
I'm pleased to announce the v4.19.1-rt3 patch set.
Changes since v4.19.1-rt2:
- A patch to the bcm2835 pinctrl driver to use raw_spinlock_t. Patch
by Lukas Wunner.
- The Atmel TCB timer patch set by Alexandre Belloni has been update
to v7.
- The RCU Kconfig entry has been tweaked and now it is no longer
required to enable RCU_EXPERT in order to enable RCU_BOOST.
Suggested by Paul E. McKenney.
- The crypto caam driver did not compile. Patch by Horia GeantÄ.
- The kbuild test robot complained about various patches because they
did not compile and so hurt bisectibility. As a result a few patches
and hunks have been moved to avoid that.
Known issues
- A warning triggered in "rcu_note_context_switch" originated from
SyS_timer_gettime(). The issue was always there, it is now
visible. Reported by Grygorii Strashko and Daniel Wagner.
The delta patch against v4.19.1-rt2 is appended below and can be found here:
https://cdn.kernel.org/pub/linux/kernel/projects/rt/4.19/incr/patch-4.19.1-rt2-rt3.patch.xz
You can get this release via the git tree at:
git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git v4.19.1-rt3
The RT patch against v4.19.1 can be found here:
https://cdn.kernel.org/pub/linux/kernel/projects/rt/4.19/older/patch-4.19.1-rt3.patch.xz
The split quilt queue is available at:
https://cdn.kernel.org/pub/linux/kernel/projects/rt/4.19/older/patches-4.19.1-rt3.tar.xz
Sebastian
diff --git a/drivers/clocksource/timer-atmel-tcb.c b/drivers/clocksource/timer-atmel-tcb.c
index bbbacf8c46b0f..63ce3b69338a0 100644
--- a/drivers/clocksource/timer-atmel-tcb.c
+++ b/drivers/clocksource/timer-atmel-tcb.c
@@ -11,7 +11,7 @@
#include <linux/sched_clock.h>
#include <soc/at91/atmel_tcb.h>
-static struct atmel_tcb_clksrc {
+struct atmel_tcb_clksrc {
struct clocksource clksrc;
struct clock_event_device clkevt;
struct regmap *regmap;
@@ -29,56 +29,55 @@ static struct atmel_tcb_clksrc {
} cache[2];
u32 bmr_cache;
bool registered;
-} tc = {
- .clksrc = {
- .rating = 200,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
- },
- .clkevt = {
- .features = CLOCK_EVT_FEAT_ONESHOT,
- /* Should be lower than at91rm9200's system timer */
- .rating = 125,
- },
+ bool clk_enabled;
};
-static struct tc_clkevt_device {
- struct clock_event_device clkevt;
- struct regmap *regmap;
- void __iomem *base;
- struct clk *slow_clk;
+static struct atmel_tcb_clksrc tc, tce;
+
+static struct clk *tcb_clk_get(struct device_node *node, int channel)
+{
struct clk *clk;
- char name[20];
- int channel;
- int irq;
- struct {
- u32 cmr;
- u32 imr;
- u32 rc;
- bool clken;
- } cache;
- bool registered;
-} tce = {
- .clkevt = {
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT,
- /*
- * Should be lower than at91rm9200's system timer
- * but higher than tc.clkevt.rating
- */
- .rating = 140,
- },
-};
+ char clk_name[] = "t0_clk";
+
+ clk_name[1] += channel;
+ clk = of_clk_get_by_name(node->parent, clk_name);
+ if (!IS_ERR(clk))
+ return clk;
+
+ return of_clk_get_by_name(node->parent, "t0_clk");
+}
/*
* Clockevent device using its own channel
*/
+
+static void tc_clkevt2_clk_disable(struct clock_event_device *d)
+{
+ clk_disable(tce.clk[0]);
+ tce.clk_enabled = false;
+}
+
+static void tc_clkevt2_clk_enable(struct clock_event_device *d)
+{
+ if (tce.clk_enabled)
+ return;
+ clk_enable(tce.clk[0]);
+ tce.clk_enabled = true;
+}
+
+static int tc_clkevt2_stop(struct clock_event_device *d)
+{
+ writel(0xff, tce.base + ATMEL_TC_IDR(tce.channels[0]));
+ writel(ATMEL_TC_CCR_CLKDIS, tce.base + ATMEL_TC_CCR(tce.channels[0]));
+
+ return 0;
+}
+
static int tc_clkevt2_shutdown(struct clock_event_device *d)
{
- writel(0xff, tce.base + ATMEL_TC_IDR(tce.channel));
- writel(ATMEL_TC_CCR_CLKDIS, tce.base + ATMEL_TC_CCR(tce.channel));
+ tc_clkevt2_stop(d);
if (!clockevent_state_detached(d))
- clk_disable(tce.clk);
+ tc_clkevt2_clk_disable(d);
return 0;
}
@@ -93,15 +92,15 @@ static int tc_clkevt2_shutdown(struct clock_event_device *d)
static int tc_clkevt2_set_oneshot(struct clock_event_device *d)
{
if (clockevent_state_oneshot(d) || clockevent_state_periodic(d))
- tc_clkevt2_shutdown(d);
+ tc_clkevt2_stop(d);
- clk_enable(tce.clk);
+ tc_clkevt2_clk_enable(d);
/* slow clock, count up to RC, then irq and stop */
writel(ATMEL_TC_CMR_TCLK(4) | ATMEL_TC_CMR_CPCSTOP |
ATMEL_TC_CMR_WAVE | ATMEL_TC_CMR_WAVESEL_UPRC,
- tce.base + ATMEL_TC_CMR(tce.channel));
- writel(ATMEL_TC_CPCS, tce.base + ATMEL_TC_IER(tce.channel));
+ tce.base + ATMEL_TC_CMR(tce.channels[0]));
+ writel(ATMEL_TC_CPCS, tce.base + ATMEL_TC_IER(tce.channels[0]));
return 0;
}
@@ -109,23 +108,23 @@ static int tc_clkevt2_set_oneshot(struct clock_event_device *d)
static int tc_clkevt2_set_periodic(struct clock_event_device *d)
{
if (clockevent_state_oneshot(d) || clockevent_state_periodic(d))
- tc_clkevt2_shutdown(d);
+ tc_clkevt2_stop(d);
/* By not making the gentime core emulate periodic mode on top
* of oneshot, we get lower overhead and improved accuracy.
*/
- clk_enable(tce.clk);
+ tc_clkevt2_clk_enable(d);
/* slow clock, count up to RC, then irq and restart */
writel(ATMEL_TC_CMR_TCLK(4) | ATMEL_TC_CMR_WAVE |
ATMEL_TC_CMR_WAVESEL_UPRC,
- tce.base + ATMEL_TC_CMR(tce.channel));
- writel((32768 + HZ / 2) / HZ, tce.base + ATMEL_TC_RC(tce.channel));
+ tce.base + ATMEL_TC_CMR(tce.channels[0]));
+ writel((32768 + HZ / 2) / HZ, tce.base + ATMEL_TC_RC(tce.channels[0]));
/* Enable clock and interrupts on RC compare */
- writel(ATMEL_TC_CPCS, tce.base + ATMEL_TC_IER(tce.channel));
+ writel(ATMEL_TC_CPCS, tce.base + ATMEL_TC_IER(tce.channels[0]));
writel(ATMEL_TC_CCR_CLKEN | ATMEL_TC_CCR_SWTRG,
- tce.base + ATMEL_TC_CCR(tce.channel));
+ tce.base + ATMEL_TC_CCR(tce.channels[0]));
return 0;
}
@@ -133,9 +132,9 @@ static int tc_clkevt2_set_periodic(struct clock_event_device *d)
static int tc_clkevt2_next_event(unsigned long delta,
struct clock_event_device *d)
{
- writel(delta, tce.base + ATMEL_TC_RC(tce.channel));
+ writel(delta, tce.base + ATMEL_TC_RC(tce.channels[0]));
writel(ATMEL_TC_CCR_CLKEN | ATMEL_TC_CCR_SWTRG,
- tce.base + ATMEL_TC_CCR(tce.channel));
+ tce.base + ATMEL_TC_CCR(tce.channels[0]));
return 0;
}
@@ -144,7 +143,7 @@ static irqreturn_t tc_clkevt2_irq(int irq, void *handle)
{
unsigned int sr;
- sr = readl(tce.base + ATMEL_TC_SR(tce.channel));
+ sr = readl(tce.base + ATMEL_TC_SR(tce.channels[0]));
if (sr & ATMEL_TC_CPCS) {
tce.clkevt.event_handler(&tce.clkevt);
return IRQ_HANDLED;
@@ -155,29 +154,29 @@ static irqreturn_t tc_clkevt2_irq(int irq, void *handle)
static void tc_clkevt2_suspend(struct clock_event_device *d)
{
- tce.cache.cmr = readl(tce.base + ATMEL_TC_CMR(tce.channel));
- tce.cache.imr = readl(tce.base + ATMEL_TC_IMR(tce.channel));
- tce.cache.rc = readl(tce.base + ATMEL_TC_RC(tce.channel));
- tce.cache.clken = !!(readl(tce.base + ATMEL_TC_SR(tce.channel)) &
+ tce.cache[0].cmr = readl(tce.base + ATMEL_TC_CMR(tce.channels[0]));
+ tce.cache[0].imr = readl(tce.base + ATMEL_TC_IMR(tce.channels[0]));
+ tce.cache[0].rc = readl(tce.base + ATMEL_TC_RC(tce.channels[0]));
+ tce.cache[0].clken = !!(readl(tce.base + ATMEL_TC_SR(tce.channels[0])) &
ATMEL_TC_CLKSTA);
}
static void tc_clkevt2_resume(struct clock_event_device *d)
{
/* Restore registers for the channel, RA and RB are not used */
- writel(tce.cache.cmr, tc.base + ATMEL_TC_CMR(tce.channel));
- writel(tce.cache.rc, tc.base + ATMEL_TC_RC(tce.channel));
- writel(0, tc.base + ATMEL_TC_RA(tce.channel));
- writel(0, tc.base + ATMEL_TC_RB(tce.channel));
+ writel(tce.cache[0].cmr, tc.base + ATMEL_TC_CMR(tce.channels[0]));
+ writel(tce.cache[0].rc, tc.base + ATMEL_TC_RC(tce.channels[0]));
+ writel(0, tc.base + ATMEL_TC_RA(tce.channels[0]));
+ writel(0, tc.base + ATMEL_TC_RB(tce.channels[0]));
/* Disable all the interrupts */
- writel(0xff, tc.base + ATMEL_TC_IDR(tce.channel));
+ writel(0xff, tc.base + ATMEL_TC_IDR(tce.channels[0]));
/* Reenable interrupts that were enabled before suspending */
- writel(tce.cache.imr, tc.base + ATMEL_TC_IER(tce.channel));
+ writel(tce.cache[0].imr, tc.base + ATMEL_TC_IER(tce.channels[0]));
/* Start the clock if it was used */
- if (tce.cache.clken)
+ if (tce.cache[0].clken)
writel(ATMEL_TC_CCR_CLKEN | ATMEL_TC_CCR_SWTRG,
- tc.base + ATMEL_TC_CCR(tce.channel));
+ tc.base + ATMEL_TC_CCR(tce.channels[0]));
}
static int __init tc_clkevt_register(struct device_node *node,
@@ -185,23 +184,24 @@ static int __init tc_clkevt_register(struct device_node *node,
int channel, int irq, int bits)
{
int ret;
+ struct clk *slow_clk;
tce.regmap = regmap;
tce.base = base;
- tce.channel = channel;
+ tce.channels[0] = channel;
tce.irq = irq;
- tce.slow_clk = of_clk_get_by_name(node->parent, "slow_clk");
- if (IS_ERR(tce.slow_clk))
- return PTR_ERR(tce.slow_clk);
+ slow_clk = of_clk_get_by_name(node->parent, "slow_clk");
+ if (IS_ERR(slow_clk))
+ return PTR_ERR(slow_clk);
- ret = clk_prepare_enable(tce.slow_clk);
+ ret = clk_prepare_enable(slow_clk);
if (ret)
return ret;
- tce.clk = tcb_clk_get(node, tce.channel);
- if (IS_ERR(tce.clk)) {
- ret = PTR_ERR(tce.clk);
+ tce.clk[0] = tcb_clk_get(node, tce.channels[0]);
+ if (IS_ERR(tce.clk[0])) {
+ ret = PTR_ERR(tce.clk[0]);
goto err_slow;
}
@@ -215,14 +215,17 @@ static int __init tc_clkevt_register(struct device_node *node,
tce.clkevt.set_state_oneshot = tc_clkevt2_set_oneshot,
tce.clkevt.suspend = tc_clkevt2_suspend,
tce.clkevt.resume = tc_clkevt2_resume,
+ tce.clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ tce.clkevt.rating = 140;
/* try to enable clk to avoid future errors in mode change */
- ret = clk_prepare_enable(tce.clk);
+ ret = clk_prepare_enable(tce.clk[0]);
if (ret)
goto err_slow;
- clk_disable(tce.clk);
+ clk_disable(tce.clk[0]);
- clockevents_config_and_register(&tce.clkevt, 32768, 1, BIT(bits) - 1);
+ clockevents_config_and_register(&tce.clkevt, 32768, 1,
+ CLOCKSOURCE_MASK(bits));
ret = request_irq(tce.irq, tc_clkevt2_irq, IRQF_TIMER | IRQF_SHARED,
tce.clkevt.name, &tce);
@@ -234,9 +237,9 @@ static int __init tc_clkevt_register(struct device_node *node,
return 0;
err_clk:
- clk_unprepare(tce.clk);
+ clk_unprepare(tce.clk[0]);
err_slow:
- clk_disable_unprepare(tce.slow_clk);
+ clk_disable_unprepare(slow_clk);
return ret;
}
@@ -276,7 +279,6 @@ static int tcb_clkevt_next_event(unsigned long delta,
{
u32 old, next, cur;
-
old = readl(tc.base + ATMEL_TC_CV(tc.channels[0]));
next = old + delta;
writel(next, tc.base + ATMEL_TC_RC(tc.channels[0]));
@@ -503,6 +505,9 @@ static int __init tcb_clksrc_register(struct device_node *node,
tc.clksrc.name = tc.name;
tc.clksrc.suspend = tc_clksrc_suspend;
tc.clksrc.resume = tc_clksrc_resume;
+ tc.clksrc.rating = 200;
+ tc.clksrc.mask = CLOCKSOURCE_MASK(32);
+ tc.clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
err = clocksource_register_hz(&tc.clksrc, divided_rate);
if (err)
@@ -518,6 +523,9 @@ static int __init tcb_clksrc_register(struct device_node *node,
tc.clkevt.set_next_event = tcb_clkevt_next_event;
tc.clkevt.set_state_oneshot = tcb_clkevt_oneshot;
tc.clkevt.set_state_shutdown = tcb_clkevt_shutdown;
+ tc.clkevt.features = CLOCK_EVT_FEAT_ONESHOT;
+ tc.clkevt.rating = 125;
+
clockevents_config_and_register(&tc.clkevt, divided_rate, 1,
BIT(tc.bits) - 1);
@@ -546,11 +554,11 @@ static int __init tcb_clksrc_register(struct device_node *node,
static int __init tcb_clksrc_init(struct device_node *node)
{
const struct of_device_id *match;
- const struct atmel_tcb_info *tcb_info;
struct regmap *regmap;
void __iomem *tcb_base;
u32 channel;
- int bits, irq, err, chan1 = -1;
+ int irq, err, chan1 = -1;
+ unsigned bits;
if (tc.registered && tce.registered)
return -ENODEV;
@@ -571,16 +579,18 @@ static int __init tcb_clksrc_init(struct device_node *node)
}
match = of_match_node(atmel_tcb_dt_ids, node->parent);
- tcb_info = match->data;
- bits = tcb_info->bits;
+ bits = (uintptr_t)match->data;
err = of_property_read_u32_index(node, "reg", 0, &channel);
if (err)
return err;
- irq = tcb_irq_get(node, channel);
- if (irq < 0)
- return irq;
+ irq = of_irq_get(node->parent, channel);
+ if (irq < 0) {
+ irq = of_irq_get(node->parent, 0);
+ if (irq < 0)
+ return irq;
+ }
if (tc.registered)
return tc_clkevt_register(node, regmap, tcb_base, channel, irq,
@@ -604,5 +614,4 @@ static int __init tcb_clksrc_init(struct device_node *node)
return tcb_clksrc_register(node, regmap, tcb_base, channel, chan1, irq,
bits);
}
-CLOCKSOURCE_OF_DECLARE(atmel_tcb_clksrc, "atmel,tcb-timer",
- tcb_clksrc_init);
+TIMER_OF_DECLARE(atmel_tcb_clksrc, "atmel,tcb-timer", tcb_clksrc_init);
diff --git a/drivers/crypto/caam/qi.c b/drivers/crypto/caam/qi.c
index 67f7f8c42c932..b84e6c8b1e138 100644
--- a/drivers/crypto/caam/qi.c
+++ b/drivers/crypto/caam/qi.c
@@ -83,13 +83,6 @@ EXPORT_SYMBOL(caam_congested);
static u64 times_congested;
#endif
-/*
- * CPU from where the module initialised. This is required because QMan driver
- * requires CGRs to be removed from same CPU from where they were originally
- * allocated.
- */
-static int mod_init_cpu;
-
/*
* This is a a cache of buffers, from which the users of CAAM QI driver
* can allocate short (CAAM_QI_MEMCACHE_SIZE) buffers. It's faster than
@@ -492,12 +485,11 @@ void caam_drv_ctx_rel(struct caam_drv_ctx *drv_ctx)
}
EXPORT_SYMBOL(caam_drv_ctx_rel);
-int caam_qi_shutdown(struct device *qidev)
+void caam_qi_shutdown(struct device *qidev)
{
- int i, ret;
+ int i;
struct caam_qi_priv *priv = dev_get_drvdata(qidev);
const cpumask_t *cpus = qman_affine_cpus();
- struct cpumask old_cpumask = current->cpus_allowed;
for_each_cpu(i, cpus) {
struct napi_struct *irqtask;
@@ -510,26 +502,12 @@ int caam_qi_shutdown(struct device *qidev)
dev_err(qidev, "Rsp FQ kill failed, cpu: %d\n", i);
}
- /*
- * QMan driver requires CGRs to be deleted from same CPU from where they
- * were instantiated. Hence we get the module removal execute from the
- * same CPU from where it was originally inserted.
- */
- set_cpus_allowed_ptr(current, get_cpu_mask(mod_init_cpu));
-
- ret = qman_delete_cgr(&priv->cgr);
- if (ret)
- dev_err(qidev, "Deletion of CGR failed: %d\n", ret);
- else
- qman_release_cgrid(priv->cgr.cgrid);
+ qman_delete_cgr_safe(&priv->cgr);
+ qman_release_cgrid(priv->cgr.cgrid);
kmem_cache_destroy(qi_cache);
- /* Now that we're done with the CGRs, restore the cpus allowed mask */
- set_cpus_allowed_ptr(current, &old_cpumask);
-
platform_device_unregister(priv->qi_pdev);
- return ret;
}
static void cgr_cb(struct qman_portal *qm, struct qman_cgr *cgr, int congested)
@@ -718,22 +696,11 @@ int caam_qi_init(struct platform_device *caam_pdev)
struct device *ctrldev = &caam_pdev->dev, *qidev;
struct caam_drv_private *ctrlpriv;
const cpumask_t *cpus = qman_affine_cpus();
- struct cpumask old_cpumask = current->cpus_allowed;
static struct platform_device_info qi_pdev_info = {
.name = "caam_qi",
.id = PLATFORM_DEVID_NONE
};
- /*
- * QMAN requires CGRs to be removed from same CPU+portal from where it
- * was originally allocated. Hence we need to note down the
- * initialisation CPU and use the same CPU for module exit.
- * We select the first CPU to from the list of portal owning CPUs.
- * Then we pin module init to this CPU.
- */
- mod_init_cpu = cpumask_first(cpus);
- set_cpus_allowed_ptr(current, get_cpu_mask(mod_init_cpu));
-
qi_pdev_info.parent = ctrldev;
qi_pdev_info.dma_mask = dma_get_mask(ctrldev);
qi_pdev = platform_device_register_full(&qi_pdev_info);
@@ -795,8 +762,6 @@ int caam_qi_init(struct platform_device *caam_pdev)
return -ENOMEM;
}
- /* Done with the CGRs; restore the cpus allowed mask */
- set_cpus_allowed_ptr(current, &old_cpumask);
#ifdef CONFIG_DEBUG_FS
debugfs_create_file("qi_congested", 0444, ctrlpriv->ctl,
×_congested, &caam_fops_u64_ro);
diff --git a/drivers/crypto/caam/qi.h b/drivers/crypto/caam/qi.h
index 357b69f570725..b6c8acc308536 100644
--- a/drivers/crypto/caam/qi.h
+++ b/drivers/crypto/caam/qi.h
@@ -174,7 +174,7 @@ int caam_drv_ctx_update(struct caam_drv_ctx *drv_ctx, u32 *sh_desc);
void caam_drv_ctx_rel(struct caam_drv_ctx *drv_ctx);
int caam_qi_init(struct platform_device *pdev);
-int caam_qi_shutdown(struct device *dev);
+void caam_qi_shutdown(struct device *dev);
/**
* qi_cache_alloc - Allocate buffers from CAAM-QI cache
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index fa530913a2c8f..08925d24180b0 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -90,7 +90,7 @@ struct bcm2835_pinctrl {
struct gpio_chip gpio_chip;
struct pinctrl_gpio_range gpio_range;
- spinlock_t irq_lock[BCM2835_NUM_BANKS];
+ raw_spinlock_t irq_lock[BCM2835_NUM_BANKS];
};
/* pins are just named GPIO0..GPIO53 */
@@ -461,10 +461,10 @@ static void bcm2835_gpio_irq_enable(struct irq_data *data)
unsigned bank = GPIO_REG_OFFSET(gpio);
unsigned long flags;
- spin_lock_irqsave(&pc->irq_lock[bank], flags);
+ raw_spin_lock_irqsave(&pc->irq_lock[bank], flags);
set_bit(offset, &pc->enabled_irq_map[bank]);
bcm2835_gpio_irq_config(pc, gpio, true);
- spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+ raw_spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
}
static void bcm2835_gpio_irq_disable(struct irq_data *data)
@@ -476,12 +476,12 @@ static void bcm2835_gpio_irq_disable(struct irq_data *data)
unsigned bank = GPIO_REG_OFFSET(gpio);
unsigned long flags;
- spin_lock_irqsave(&pc->irq_lock[bank], flags);
+ raw_spin_lock_irqsave(&pc->irq_lock[bank], flags);
bcm2835_gpio_irq_config(pc, gpio, false);
/* Clear events that were latched prior to clearing event sources */
bcm2835_gpio_set_bit(pc, GPEDS0, gpio);
clear_bit(offset, &pc->enabled_irq_map[bank]);
- spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+ raw_spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
}
static int __bcm2835_gpio_irq_set_type_disabled(struct bcm2835_pinctrl *pc,
@@ -584,7 +584,7 @@ static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type)
unsigned long flags;
int ret;
- spin_lock_irqsave(&pc->irq_lock[bank], flags);
+ raw_spin_lock_irqsave(&pc->irq_lock[bank], flags);
if (test_bit(offset, &pc->enabled_irq_map[bank]))
ret = __bcm2835_gpio_irq_set_type_enabled(pc, gpio, type);
@@ -596,7 +596,7 @@ static int bcm2835_gpio_irq_set_type(struct irq_data *data, unsigned int type)
else
irq_set_handler_locked(data, handle_level_irq);
- spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
+ raw_spin_unlock_irqrestore(&pc->irq_lock[bank], flags);
return ret;
}
@@ -1047,7 +1047,7 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
for_each_set_bit(offset, &events, 32)
bcm2835_gpio_wr(pc, GPEDS0 + i * 4, BIT(offset));
- spin_lock_init(&pc->irq_lock[i]);
+ raw_spin_lock_init(&pc->irq_lock[i]);
}
err = gpiochip_add_data(&pc->gpio_chip, pc);
diff --git a/include/soc/at91/atmel_tcb.h b/include/soc/at91/atmel_tcb.h
index d263ea6772259..657e234b14832 100644
--- a/include/soc/at91/atmel_tcb.h
+++ b/include/soc/at91/atmel_tcb.h
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+//SPDX-License-Identifier: GPL-2.0
/* Copyright (C) 2018 Microchip */
#ifndef __SOC_ATMEL_TCB_H
@@ -166,48 +166,15 @@
#define ATMEL_TC_WPMR_WPKEY (0x54494d << 8)
#define ATMEL_TC_WPMR_WPEN BIT(0)
-static inline struct clk *tcb_clk_get(struct device_node *node, int channel)
-{
- struct clk *clk;
- char clk_name[] = "t0_clk";
-
- clk_name[1] += channel;
- clk = of_clk_get_by_name(node->parent, clk_name);
- if (!IS_ERR(clk))
- return clk;
-
- return of_clk_get_by_name(node->parent, "t0_clk");
-}
-
-static inline int tcb_irq_get(struct device_node *node, int channel)
-{
- int irq;
-
- irq = of_irq_get(node->parent, channel);
- if (irq > 0)
- return irq;
-
- return of_irq_get(node->parent, 0);
-}
-
static const u8 atmel_tc_divisors[5] = { 2, 8, 32, 128, 0, };
-struct atmel_tcb_info {
- int bits;
-};
-
-static const struct atmel_tcb_info atmel_tcb_infos[] = {
- { .bits = 16 },
- { .bits = 32 },
-};
-
static const struct of_device_id atmel_tcb_dt_ids[] = {
{
.compatible = "atmel,at91rm9200-tcb",
- .data = &atmel_tcb_infos[0],
+ .data = (void *)16,
}, {
.compatible = "atmel,at91sam9x5-tcb",
- .data = &atmel_tcb_infos[1],
+ .data = (void *)32,
}, {
/* sentinel */
}
diff --git a/kernel/rcu/Kconfig b/kernel/rcu/Kconfig
index 0be2c96fb640e..a243a78ff38c0 100644
--- a/kernel/rcu/Kconfig
+++ b/kernel/rcu/Kconfig
@@ -36,7 +36,7 @@ config TINY_RCU
config RCU_EXPERT
bool "Make expert-level adjustments to RCU configuration"
- default y if PREEMPT_RT_FULL
+ default n
help
This option needs to be enabled if you wish to make
expert-level adjustments to RCU configuration. By default,
@@ -190,7 +190,7 @@ config RCU_FAST_NO_HZ
config RCU_BOOST
bool "Enable RCU priority boosting"
- depends on RT_MUTEXES && PREEMPT_RCU && RCU_EXPERT
+ depends on (RT_MUTEXES && PREEMPT_RCU && RCU_EXPERT) || PREEMPT_RT_FULL
default y if PREEMPT_RT_FULL
help
This option boosts the priority of preempted RCU readers that
diff --git a/localversion-rt b/localversion-rt
index c3054d08a1129..1445cd65885cd 100644
--- a/localversion-rt
+++ b/localversion-rt
@@ -1 +1 @@
--rt2
+-rt3