Re: [PATCH] clk: qcom: gcc: Fix board clock node name

[Vinod Koul]

Fix Rob's email id... and looping him correctly :)

On 09-11-18, 23:18, Vinod Koul wrote:
> (Add Rob & Bjorn)
> 
> Hi Steve,
> 
> On 09-11-18, 09:12, Stephen Boyd wrote:
> > Quoting Vinod Koul (2018-11-09 01:50:54)
> > > Device tree node name are not supposed to have "_" in them so fix the
> > > node name use of xo_board to xo-board
> > > 
> > > Fixes: 652f1813c113 ("clk: qcom: gcc: Add global clock controller driver for QCS404")
> > > Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> > > ---
> > > 
> > > Steve: RobH pointed this on DTS patches, would be great if you can pick this
> > > as a fix
> > 
> > Ok.
> > 
> > > 
> > >  drivers/clk/qcom/gcc-qcs404.c | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/clk/qcom/gcc-qcs404.c b/drivers/clk/qcom/gcc-qcs404.c
> > > index e4ca6a45f313..ef1b267cb058 100644
> > > --- a/drivers/clk/qcom/gcc-qcs404.c
> > > +++ b/drivers/clk/qcom/gcc-qcs404.c
> > > @@ -265,7 +265,7 @@ static struct clk_fixed_factor cxo = {
> > >         .div = 1,
> > >         .hw.init = &(struct clk_init_data){
> > >                 .name = "cxo",
> > > -               .parent_names = (const char *[]){ "xo_board" },
> > > +               .parent_names = (const char *[]){ "xo-board" },
> > 
> > We have xo_board used everywhere else in drivers/clk/qcom/ so this makes
> > me concerned. Wouldn't a better answer be to add clock-output-names to
> > the xo-board DT node and have arm-soc merge that through. I mostly want
> > to keep things consistent here so that if we need to inject an xo_board
> > clk into the system then we can do so generically instead of making it
> > per-platform. Of course, if we're never going to have this problem on
> > qcs404 then it will be fine to start differing here. So I'm leaning
> > towards merge this patch, just please ack my concern here and tell me it
> > won't be a problem and I'll be happy to merge to clk-fixes.
> 
> So this is a warning from DT compiler and triggered with W=12, I
> see tons of examples using "_" in node names. Clearly someone realized
> it (Rob ?) added a warning for it.
> 
> As you rightly thought, qcs404 will be okay as we are starting out and following
> few conventions so keeping this saner :)
> 
> > BTW, can you also specify a 'clocks' property in the GCC node and send
> > the xo_board node there? In fact, we should do that for every GCC node
> > in the tree. Care to do that and also add sleep_clk to each clock
> > controller node that uses it? This is useful to do so that we can more
> > easily see where clocks are going between clock controller nodes.
> 
> I agree that it makes sense to add the property in gcc node. I will add
> this in my list and chase if after my current task completes, if that is
> fine by you
> 
> Thanks
> -- 
> ~Vinod

-- 
~Vinod