[PATCH 2/3] rtc: sd3078: new driver.

From: zoro
Date: Sat Nov 10 2018 - 03:44:39 EST


The sd3078 is a combination RTC and SRAM device with I2C interface.

Signed-off-by: zoro <long17.cool@xxxxxxx>
---
MAINTAINERS | 6 +
drivers/rtc/Kconfig | 9 ++
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-sd3078.c | 300 ++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 316 insertions(+)
create mode 100644 drivers/rtc/rtc-sd3078.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 2f3eba4..002fcd7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16125,6 +16125,12 @@ L: linux-gpio@xxxxxxxxxxxxxxx
S: Maintained
F: drivers/gpio/gpio-wcove.c

+WHWAVE RTC DRIVER
+M: Zoro Li <long17.cool@xxxxxxx>
+L: linux-rtc@xxxxxxxxxxxxxxx
+S: Maintained
+F: drivers/rtc/rtc-sd3078.c
+
WIIMOTE HID DRIVER
M: David Herrmann <dh.herrmann@xxxxxxxxxxxxxx>
L: linux-input@xxxxxxxxxxxxxxx
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index a819ef0..5b4b1b4 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -646,6 +646,15 @@ config RTC_DRV_S5M
This driver can also be built as a module. If so, the module
will be called rtc-s5m.

+config RTC_DRV_SD3078
+ tristate "ZXW Crystal SD3078"
+ help
+ If you say yes here you get support for the ZXW Crystal
+ SD3078 RTC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-sd3078.
+
endif # I2C

comment "SPI RTC drivers"
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 290c173..de9b670 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -176,3 +176,4 @@ obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o
obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
obj-$(CONFIG_RTC_DRV_XGENE) += rtc-xgene.o
obj-$(CONFIG_RTC_DRV_ZYNQMP) += rtc-zynqmp.o
+obj-$(CONFIG_RTC_DRV_SD3078) += rtc-sd3078.o
diff --git a/drivers/rtc/rtc-sd3078.c b/drivers/rtc/rtc-sd3078.c
new file mode 100644
index 0000000..bb24ba1
--- /dev/null
+++ b/drivers/rtc/rtc-sd3078.c
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Real Time Clock (RTC) Driver for sd3078
+ * Copyright (C) 2018 Zoro Li
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+
+#define SD3078_REG_SC 0x00
+#define SD3078_REG_MN 0x01
+#define SD3078_REG_HR 0x02
+#define SD3078_REG_DW 0x03
+#define SD3078_REG_DM 0x04
+#define SD3078_REG_MO 0x05
+#define SD3078_REG_YR 0x06
+
+#define SD3078_REG_CTRL1 0x0f
+#define SD3078_REG_CTRL2 0x10
+#define SD3078_REG_CTRL3 0x11
+
+#define KEY_WRITE1 0x80
+#define KEY_WRITE2 0x04
+#define KEY_WRITE3 0x80
+
+struct sd3078 {
+ struct rtc_device *rtc;
+};
+
+struct i2c_driver sd3078_driver;
+
+
+static int sd3078_i2c_read_regs(struct i2c_client *client,
+ unsigned char reg, unsigned char buf[], unsigned int len)
+{
+ struct i2c_adapter *adap = client->adapter;
+ unsigned char reg_buf = reg;
+ int ret;
+ struct i2c_msg msgs[] = {
+ {/* setup read ptr */
+ .addr = client->addr,
+ .len = 1,
+ .buf = &reg_buf
+ },
+ {/* read status + date */
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = len,
+ .buf = buf
+ },
+ };
+
+ ret = i2c_transfer(adap, msgs, 2);
+ return (ret == 2) ? len : ret;
+}
+
+static int sd3078_i2c_write_reg(struct i2c_client *client,
+ unsigned char reg, unsigned char value)
+{
+ unsigned char data[2];
+ int ret;
+
+ data[0] = reg;
+ data[1] = value;
+ ret = i2c_master_send(client, data, 2);
+ return ret;
+}
+
+/*
+ * In order to prevent arbitrary modification of the time register,
+ * when modification of the register,
+ * the "write" bit needs to be written in a certain order.
+ * 1. set WRITE1 bit
+ * 2. set WRITE2 bit
+ * 1. set WRITE3 bit
+ */
+static void sd3078_enable_reg_write(struct i2c_client *client)
+{
+ unsigned char reg1, reg2;
+
+ sd3078_i2c_read_regs(client, SD3078_REG_CTRL1, &reg1, 1);
+ sd3078_i2c_read_regs(client, SD3078_REG_CTRL2, &reg2, 1);
+
+ reg2 |= KEY_WRITE1;
+ sd3078_i2c_write_reg(client, SD3078_REG_CTRL2, reg2);
+
+ reg1 |= KEY_WRITE2;
+ sd3078_i2c_write_reg(client, SD3078_REG_CTRL1, reg1);
+
+ reg1 |= KEY_WRITE3;
+ sd3078_i2c_write_reg(client, SD3078_REG_CTRL1, reg1);
+
+ sd3078_i2c_read_regs(client, SD3078_REG_CTRL1, &reg1, 1);
+ sd3078_i2c_read_regs(client, SD3078_REG_CTRL2, &reg2, 1);
+}
+
+/*
+ * In order to prevent arbitrary modification of the time register,
+ * we should disable the write function.
+ * when disable write,
+ * the "write" bit needs to be clear in a certain order.
+ * 1. clear WRITE2 bit
+ * 2. clear WRITE3 bit
+ * 3. clear WRITE1 bit
+ */
+static void sd3078_disable_reg_write(struct i2c_client *client)
+{
+ unsigned char reg1, reg2;
+
+ sd3078_i2c_read_regs(client, SD3078_REG_CTRL1, &reg1, 1);
+ sd3078_i2c_read_regs(client, SD3078_REG_CTRL2, &reg2, 1);
+
+ reg1 &= ~KEY_WRITE2;
+ sd3078_i2c_write_reg(client, SD3078_REG_CTRL1, reg1);
+
+ reg1 &= ~KEY_WRITE3;
+ sd3078_i2c_write_reg(client, SD3078_REG_CTRL1, reg1);
+
+ reg2 &= ~KEY_WRITE1;
+ sd3078_i2c_write_reg(client, SD3078_REG_CTRL2, reg2);
+
+ sd3078_i2c_read_regs(client, SD3078_REG_CTRL1, &reg1, 1);
+ sd3078_i2c_read_regs(client, SD3078_REG_CTRL2, &reg2, 1);
+}
+
+static int sd3078_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+ unsigned char buf[7] = {0};
+ unsigned char hour;
+
+ sd3078_i2c_read_regs(client, SD3078_REG_SC, buf, 7);
+
+ tm->tm_sec = bcd2bin(buf[SD3078_REG_SC] & 0x7F);
+ tm->tm_min = bcd2bin(buf[SD3078_REG_MN] & 0x7F);
+ hour = buf[SD3078_REG_HR];
+
+ if (hour & 0x80) /* 24H PM */
+ tm->tm_hour = bcd2bin(buf[SD3078_REG_HR] & 0x3F);
+ else if (hour & 0x20) /* 12H PM */
+ tm->tm_hour = bcd2bin(buf[SD3078_REG_HR] & 0x1F) + 12;
+ else /* 12H AM */
+ tm->tm_hour = bcd2bin(buf[SD3078_REG_HR] & 0x1F);
+
+ tm->tm_mday = bcd2bin(buf[SD3078_REG_DM] & 0x3F);
+ tm->tm_wday = buf[SD3078_REG_DW] & 0x07;
+ /* rtc mn 1-12 */
+ tm->tm_mon = bcd2bin(buf[SD3078_REG_MO] & 0x1F) - 1;
+ tm->tm_year = bcd2bin(buf[SD3078_REG_YR])+100;
+
+ if (rtc_valid_tm(tm) < 0)
+ dev_err(&client->dev, "retrieved date/time is not valid.\n");
+
+ return 0;
+}
+
+static int sd3078_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+ int i, err;
+ unsigned char buf[9];
+
+ dev_dbg(&client->dev,
+ "%s: secs=%d, mins=%d, hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ __func__,
+ tm->tm_sec, tm->tm_min, tm->tm_hour,
+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ /* hours, minutes and seconds */
+ buf[SD3078_REG_SC] = bin2bcd(tm->tm_sec);
+ buf[SD3078_REG_MN] = bin2bcd(tm->tm_min);
+ /* set 24H mode */
+ buf[SD3078_REG_HR] = bin2bcd(tm->tm_hour) | 0x80;
+
+ buf[SD3078_REG_DM] = bin2bcd(tm->tm_mday);
+
+ /* month, 1 - 12 */
+ buf[SD3078_REG_MO] = bin2bcd(tm->tm_mon) + 1;
+
+ /* year and century */
+ buf[SD3078_REG_YR] = bin2bcd(tm->tm_year % 100);
+ buf[SD3078_REG_DW] = tm->tm_wday & 0x07;
+
+ sd3078_enable_reg_write(client);
+
+ /* write register's data */
+ for (i = 0; i < 7; i++) {
+ err = sd3078_i2c_write_reg(client,
+ SD3078_REG_SC + i, buf[SD3078_REG_SC + i]);
+ if (err != 2)
+ return -EIO;
+ }
+
+ sd3078_disable_reg_write(client);
+
+ return 0;
+}
+
+
+#ifdef CONFIG_RTC_INTF_DEV
+static int sd3078_rtc_ioctl(struct device *dev,
+ unsigned int cmd, unsigned long arg)
+{
+ switch (cmd) {
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+#else
+#define sd3078_rtc_ioctl NULL
+#endif
+
+static int sd3078_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ return sd3078_get_datetime(to_i2c_client(dev), tm);
+}
+
+static int sd3078_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ return sd3078_set_datetime(to_i2c_client(dev), tm);
+}
+
+static const struct rtc_class_ops sd3078_rtc_ops = {
+ .ioctl = sd3078_rtc_ioctl,
+ .read_time = sd3078_rtc_read_time,
+ .set_time = sd3078_rtc_set_time,
+};
+
+static int sd3078_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct sd3078 *sd3078;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ return -ENODEV;
+
+ sd3078 = devm_kzalloc(&client->dev, sizeof(*sd3078), GFP_KERNEL);
+ if (!sd3078)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, sd3078);
+
+ sd3078->rtc = devm_rtc_device_register(&client->dev,
+ sd3078_driver.driver.name,
+ &sd3078_rtc_ops, THIS_MODULE);
+
+ if (IS_ERR(sd3078->rtc))
+ return PTR_ERR(sd3078->rtc);
+
+ return 0;
+}
+
+static int sd3078_remove(struct i2c_client *client)
+{
+ return 0;
+}
+
+static const struct i2c_device_id sd3078_id[] = {
+ {"sd3078", 0},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, sd3078_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id rtc_dt_ids[] = {
+ { .compatible = "whwave,sd3078" },
+ {},
+};
+#endif
+
+struct i2c_driver sd3078_driver = {
+ .driver = {
+ .name = "sd3078",
+ .owner = THIS_MODULE,
+#ifdef CONFIG_OF
+ .of_match_table = of_match_ptr(rtc_dt_ids),
+#endif
+ },
+ .probe = sd3078_probe,
+ .remove = sd3078_remove,
+ .id_table = sd3078_id,
+};
+
+static int __init sd3078_init(void)
+{
+ return i2c_add_driver(&sd3078_driver);
+}
+
+static void __exit sd3078_exit(void)
+{
+ i2c_del_driver(&sd3078_driver);
+}
+
+module_init(sd3078_init);
+module_exit(sd3078_exit);
+
+MODULE_AUTHOR("Zoro Li <long17.cool@xxxxxxx>");
+MODULE_DESCRIPTION("SD3078 RTC driver");
+MODULE_LICENSE("GPL");
--
1.7.9.5