Re: [PATCH v3 1/4] staging: iio: ad7816: Switch to the gpio descriptor interface

[Jonathan Cameron]

On Fri, 9 Nov 2018 13:05:17 +0530
Nishad Kamdar <nishadkamdar@xxxxxxxxx> wrote:

> Use the gpiod interface for rdwr_pin, convert_pin and busy_pin
> instead of the deprecated old non-descriptor interface.
> 
> Signed-off-by: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan

> ---
>  drivers/staging/iio/adc/ad7816.c | 80 ++++++++++++++------------------
>  1 file changed, 34 insertions(+), 46 deletions(-)
> 
> diff --git a/drivers/staging/iio/adc/ad7816.c b/drivers/staging/iio/adc/ad7816.c
> index bf76a8620bdb..12c4e0ab4713 100644
> --- a/drivers/staging/iio/adc/ad7816.c
> +++ b/drivers/staging/iio/adc/ad7816.c
> @@ -7,7 +7,7 @@
>   */
>  
>  #include <linux/interrupt.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/device.h>
>  #include <linux/kernel.h>
>  #include <linux/slab.h>
> @@ -44,9 +44,9 @@
>  
>  struct ad7816_chip_info {
>  	struct spi_device *spi_dev;
> -	u16 rdwr_pin;
> -	u16 convert_pin;
> -	u16 busy_pin;
> +	struct gpio_desc *rdwr_pin;
> +	struct gpio_desc *convert_pin;
> +	struct gpio_desc *busy_pin;
>  	u8  oti_data[AD7816_CS_MAX + 1];
>  	u8  channel_id;	/* 0 always be temperature */
>  	u8  mode;
> @@ -61,28 +61,28 @@ static int ad7816_spi_read(struct ad7816_chip_info *chip, u16 *data)
>  	int ret = 0;
>  	__be16 buf;
>  
> -	gpio_set_value(chip->rdwr_pin, 1);
> -	gpio_set_value(chip->rdwr_pin, 0);
> +	gpiod_set_value(chip->rdwr_pin, 1);
> +	gpiod_set_value(chip->rdwr_pin, 0);
>  	ret = spi_write(spi_dev, &chip->channel_id, sizeof(chip->channel_id));
>  	if (ret < 0) {
>  		dev_err(&spi_dev->dev, "SPI channel setting error\n");
>  		return ret;
>  	}
> -	gpio_set_value(chip->rdwr_pin, 1);
> +	gpiod_set_value(chip->rdwr_pin, 1);
>  
>  	if (chip->mode == AD7816_PD) { /* operating mode 2 */
> -		gpio_set_value(chip->convert_pin, 1);
> -		gpio_set_value(chip->convert_pin, 0);
> +		gpiod_set_value(chip->convert_pin, 1);
> +		gpiod_set_value(chip->convert_pin, 0);
>  	} else { /* operating mode 1 */
> -		gpio_set_value(chip->convert_pin, 0);
> -		gpio_set_value(chip->convert_pin, 1);
> +		gpiod_set_value(chip->convert_pin, 0);
> +		gpiod_set_value(chip->convert_pin, 1);
>  	}
>  
> -	while (gpio_get_value(chip->busy_pin))
> +	while (gpiod_get_value(chip->busy_pin))
>  		cpu_relax();
>  
> -	gpio_set_value(chip->rdwr_pin, 0);
> -	gpio_set_value(chip->rdwr_pin, 1);
> +	gpiod_set_value(chip->rdwr_pin, 0);
> +	gpiod_set_value(chip->rdwr_pin, 1);
>  	ret = spi_read(spi_dev, &buf, sizeof(*data));
>  	if (ret < 0) {
>  		dev_err(&spi_dev->dev, "SPI data read error\n");
> @@ -99,8 +99,8 @@ static int ad7816_spi_write(struct ad7816_chip_info *chip, u8 data)
>  	struct spi_device *spi_dev = chip->spi_dev;
>  	int ret = 0;
>  
> -	gpio_set_value(chip->rdwr_pin, 1);
> -	gpio_set_value(chip->rdwr_pin, 0);
> +	gpiod_set_value(chip->rdwr_pin, 1);
> +	gpiod_set_value(chip->rdwr_pin, 0);
>  	ret = spi_write(spi_dev, &data, sizeof(data));
>  	if (ret < 0)
>  		dev_err(&spi_dev->dev, "SPI oti data write error\n");
> @@ -129,10 +129,10 @@ static ssize_t ad7816_store_mode(struct device *dev,
>  	struct ad7816_chip_info *chip = iio_priv(indio_dev);
>  
>  	if (strcmp(buf, "full")) {
> -		gpio_set_value(chip->rdwr_pin, 1);
> +		gpiod_set_value(chip->rdwr_pin, 1);
>  		chip->mode = AD7816_FULL;
>  	} else {
> -		gpio_set_value(chip->rdwr_pin, 0);
> +		gpiod_set_value(chip->rdwr_pin, 0);
>  		chip->mode = AD7816_PD;
>  	}
>  
> @@ -345,15 +345,9 @@ static int ad7816_probe(struct spi_device *spi_dev)
>  {
>  	struct ad7816_chip_info *chip;
>  	struct iio_dev *indio_dev;
> -	unsigned short *pins = dev_get_platdata(&spi_dev->dev);
>  	int ret = 0;
>  	int i;
>  
> -	if (!pins) {
> -		dev_err(&spi_dev->dev, "No necessary GPIO platform data.\n");
> -		return -EINVAL;
> -	}
> -
>  	indio_dev = devm_iio_device_alloc(&spi_dev->dev, sizeof(*chip));
>  	if (!indio_dev)
>  		return -ENOMEM;
> @@ -364,34 +358,28 @@ static int ad7816_probe(struct spi_device *spi_dev)
>  	chip->spi_dev = spi_dev;
>  	for (i = 0; i <= AD7816_CS_MAX; i++)
>  		chip->oti_data[i] = 203;
> -	chip->rdwr_pin = pins[0];
> -	chip->convert_pin = pins[1];
> -	chip->busy_pin = pins[2];
> -
> -	ret = devm_gpio_request(&spi_dev->dev, chip->rdwr_pin,
> -				spi_get_device_id(spi_dev)->name);
> -	if (ret) {
> -		dev_err(&spi_dev->dev, "Fail to request rdwr gpio PIN %d.\n",
> -			chip->rdwr_pin);
> +
> +	chip->rdwr_pin = devm_gpiod_get(&spi_dev->dev, "rdwr", GPIOD_IN);
> +	if (IS_ERR(chip->rdwr_pin)) {
> +		ret = PTR_ERR(chip->rdwr_pin);
> +		dev_err(&spi_dev->dev, "Failed to request rdwr GPIO: %d\n",
> +			ret);
>  		return ret;
>  	}
> -	gpio_direction_input(chip->rdwr_pin);
> -	ret = devm_gpio_request(&spi_dev->dev, chip->convert_pin,
> -				spi_get_device_id(spi_dev)->name);
> -	if (ret) {
> -		dev_err(&spi_dev->dev, "Fail to request convert gpio PIN %d.\n",
> -			chip->convert_pin);
> +	chip->convert_pin = devm_gpiod_get(&spi_dev->dev, "convert", GPIOD_IN);
> +	if (IS_ERR(chip->convert_pin)) {
> +		ret = PTR_ERR(chip->convert_pin);
> +		dev_err(&spi_dev->dev, "Failed to request convert GPIO: %d\n",
> +			ret);
>  		return ret;
>  	}
> -	gpio_direction_input(chip->convert_pin);
> -	ret = devm_gpio_request(&spi_dev->dev, chip->busy_pin,
> -				spi_get_device_id(spi_dev)->name);
> -	if (ret) {
> -		dev_err(&spi_dev->dev, "Fail to request busy gpio PIN %d.\n",
> -			chip->busy_pin);
> +	chip->busy_pin = devm_gpiod_get(&spi_dev->dev, "busy", GPIOD_IN);
> +	if (IS_ERR(chip->busy_pin)) {
> +		ret = PTR_ERR(chip->busy_pin);
> +		dev_err(&spi_dev->dev, "Failed to request busy GPIO: %d\n",
> +			ret);
>  		return ret;
>  	}
> -	gpio_direction_input(chip->busy_pin);
>  
>  	indio_dev->name = spi_get_device_id(spi_dev)->name;
>  	indio_dev->dev.parent = &spi_dev->dev;