[PATCH v2 05/11] [media] marvell-ccic: don't generate EOF on parallel bus

[Lubomir Rintel]

The commit 05fed81625bf ("[media] marvell-ccic: add MIPI support for
marvell-ccic driver") that claimed to add CSI2 turned on C0_EOF_VSYNC for
parallel bus without a very good explanation.

That broke camera on OLPC XO-1.75 which precisely uses a sensor on a
parallel bus. Revert that chunk.

Tested on an OLPC XO-1.75.

Fixes: 05fed81625bf755cc67c5864cdfd18b69ea828d1
Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
 drivers/media/platform/marvell-ccic/mcam-core.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index d97f39bde9bd..d24e5b7a3bc5 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -792,12 +792,6 @@ static void mcam_ctlr_image(struct mcam_camera *cam)
 	 * Make sure it knows we want to use hsync/vsync.
 	 */
 	mcam_reg_write_mask(cam, REG_CTRL0, C0_SIF_HVSYNC, C0_SIFM_MASK);
-	/*
-	 * This field controls the generation of EOF(DVP only)
-	 */
-	if (cam->bus_type != V4L2_MBUS_CSI2_DPHY)
-		mcam_reg_set_bit(cam, REG_CTRL0,
-				C0_EOF_VSYNC | C0_VEDGE_CTRL);
 }
 
 
-- 
2.19.1