[PATCH v3 06/18] DT: marvell,mmp2: fix TWSI2

[Lubomir Rintel]

Marvell keeps their MMP2 datasheet secret, but there are good clues
that TWSI2 is not on 0xd4025000 on that platform, not does it use
IRQ 58. In fact, the IRQ 58 on MMP2 seems to be a signal processor:

   arch/arm/mach-mmp/irqs.h:#define IRQ_MMP2_MSP  58

I'm taking a somewhat educated guess that is probably a copy & paste
error from PXA168 or PXA910 and that the real controller in fact hides
at address 0xd4031000 and uses an interrupt line multiplexed via IRQ 17.

I'm also copying some properties from TWSI1 that were missing or
incorrect.

Tested on a OLPC XO 1.75 machine, where the RTC is on TWSI2.

Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
Tested-by: Pavel Machek <pavel@xxxxxx>
---
 arch/arm/boot/dts/mmp2.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 063382b3eaca..63d49abf4e92 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -257,12 +257,15 @@
 				status = "disabled";
 			};
 
-			twsi2: i2c@d4025000 {
+			twsi2: i2c@d4031000 {
 				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4025000 0x1000>;
-				interrupts = <58>;
+				reg = <0xd4031000 0x1000>;
+				interrupt-parent = <&intcmux17>;
+				interrupts = <0>;
 				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
 				resets = <&soc_clocks MMP2_CLK_TWSI1>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "disabled";
 			};
 
-- 
2.19.1