[PATCH v6 00/24] arm64: provide pseudo NMI with GICv3
From: Julien Thierry
Date: Mon Nov 12 2018 - 06:57:30 EST
Hi,
This series is a continuation of the work started by Daniel [1]. The goal
is to use GICv3 interrupt priorities to simulate an NMI.
The patches depend on the core API for NMIs patches [2].
To achieve this, set two priorities, one for standard interrupts and
another, higher priority, for NMIs. Whenever we want to disable interrupts,
we mask the standard priority instead so NMIs can still be raised. Some
corner cases though still require to actually mask all interrupts
effectively disabling the NMI.
Daniel Thompson ran some benchmarks [3] on a previous version showing a
small (<1%) performance drop when using interrupt priorities on Cortex-A53
and GIC-500.
Currently, only PPIs and SPIs can be set as NMIs. IPIs being currently
hardcoded IRQ numbers, there isn't a generic interface to set SGIs as NMI
for now. LPIs being controlled by the ITS cannot be delivered as NMI.
When an NMI is active on a CPU, no other NMI can be triggered on the CPU.
Requirements to use this:
- Have GICv3
- SCR_EL3.FIQ is set to 1 when linux runs or have single security state
- Select Kernel Feature -> Use ICC system registers for IRQ masking
* Patches 1 and 2 are just a bit of cleanup
* Patch 3 introduces a CPU feature to check if priority masking should be
used
* Patches 4 and 5 add the support for priority masking in GICv3 driver
* Patches 6 to 11 add the support for priority masking the arch/arm64
code
* Patches 12 and 13 allow us to apply alternatives earlier in the boot
process
* Patches 14 to 16 starts the PMR masking on cpu startup and provides
primitives for arm64 GICv3 driver to perform priority masking
* Patches 17 to 20 Add support for pseudo-NMIs in GICv3 driver
* Patches 21 to 23 Add support for receiving NMIs in arch/arm64
* Patch 24 adds the build config and command line option to enable
pseudo-NMIs
Changes since v5[4]:
* Rebased on v4.20-rc2
* Reorganized patches again
* Renamed compile option + PMR values defines
* Write PMR enablement for cpu startup in C
* Fix wrong array size passed to __apply_alternatives
* Do not touch PMR in pt_regs when not using irq masking
* Remove ISB between PMR and IAR -> turns out it is not needed
* Simplify irqflags code after introducing PMR in it
* Use ref count API to track PPIs set as NMI
* Simplify NMI exit path
Changes since V4[5]:
* Rebased to v4.19-rc1
* Adapted GIC driver to the core NMI API
* Added option to disable priority masking on command line
* Added Daniel's Tested-by on patches related replacing PSR.I toggling with
PMR masking
* Fix scope matching for alternative features.
* Spotted some more places using PSR.I or daif and replaced with generic
interrupt functions
Changes since V3[6]:
* Big refactoring. As suggested by Marc Z., some of the bigger patches
needed to be split into smaller one.
* Try to reduce the amount of #ifdef for the new feature by introducing
an individual cpufeature for priority masking
* Do not track which alternatives have been applied (was a bit dodgy
anyway), and use an alternative for VHE cpu_enable callback
* Fix a build failure with arm by adding the correct RPR accessors
* Added Suggested-by tags for changes from comming or inspired by Daniel's
series. Do let me know if you feel I missed something and am not giving
you due credit.
Changes since V2[7]:
* Series rebase to v4.17-rc6
* Adapt pathces 1 and 2 to the rework of cpufeatures framework
* Use the group0 detection scheme in the GICv3 driver to identify
the priority view, and drop the use of a fake interrupt
* Add the case for a GIC configured in a single security state
* Use local_daif_restore instead of local_irq_enable the first time
we enable interrupts after a bp hardening in the handling of a kernel
entry. Otherwise PRS.I remains set...
Changes since V1[8]:
* Series rebased to v4.15-rc8.
* Check for arm64_early_features in this_cpu_has_cap (spotted by Suzuki).
* Fix issue where debug exception were not masked when enabling debug in
mdscr_el1.
Changes since RFC[9]:
* The series was rebased to v4.15-rc2 which implied some changes mainly
related to the work on exception entries and daif flags by James Morse.
- The first patch in the previous series was dropped because no longer
applicable.
- With the semantics James introduced of "inheriting" daif flags,
handling of PMR on exception entry is simplified as PMR is not altered
by taking an exception and already inherited from previous state.
- James pointed out that taking a PseudoNMI before reading the FAR_EL1
register should not be allowed as per the TRM (D10.2.29):
"FAR_EL1 is made UNKNOWN on an exception return from EL1."
So in this submission PSR.I bit is cleared only after FAR_EL1 is read.
* For KVM, only deal with PMR unmasking/restoring in common code, and VHE
specific code makes sure PSR.I bit is set when necessary.
* When detecting the GIC priority view (patch 5), wait for an actual
interrupt instead of trying only once.
[1] http://www.spinics.net/lists/arm-kernel/msg525077.html
[2] https://lkml.org/lkml/2018/11/12/2113
[3] https://lkml.org/lkml/2018/7/20/803
[4] https://lkml.org/lkml/2018/8/28/693
[5] https://lkml.org/lkml/2018/7/24/321
[6] https://lkml.org/lkml/2018/5/21/276
[7] https://lkml.org/lkml/2018/1/17/335
[8] https://www.spinics.net/lists/arm-kernel/msg620763.html
[9] https://www.spinics.net/lists/arm-kernel/msg610736.html
Cheers,
Julien
-->
Daniel Thompson (1):
arm64: alternative: Apply alternatives early in boot process
Julien Thierry (23):
arm64: Remove unused daif related functions/macros
arm64: cpufeature: Set SYSREG_GIC_CPUIF as a boot system feature
arm64: cpufeature: Add cpufeature for IRQ priority masking
arm/arm64: gic-v3: Add PMR and RPR accessors
irqchip/gic-v3: Switch to PMR masking before calling IRQ handler
arm64: ptrace: Provide definitions for PMR values
arm64: Make PMR part of task context
arm64: Unmask PMR before going idle
arm64: kvm: Unmask PMR before entering guest
arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking
arm64: daifflags: Include PMR in daifflags restore operations
arm64: alternative: Allow alternative status checking per cpufeature
irqchip/gic-v3: Factor group0 detection into functions
arm64: Switch to PMR masking when starting CPUs
arm64: gic-v3: Implement arch support for priority masking
irqchip/gic-v3: Detect if GIC can support pseudo-NMIs
irqchip/gic-v3: Handle pseudo-NMIs
irqchip/gic: Add functions to access irq priorities
irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI
arm64: Handle serror in NMI context
arm64: Skip preemption when exiting an NMI
arm64: Skip irqflags tracing for NMI in IRQs disabled context
arm64: Enable the support of pseudo-NMIs
Documentation/admin-guide/kernel-parameters.txt | 6 +
Documentation/arm64/booting.txt | 5 +
arch/arm/include/asm/arch_gicv3.h | 33 ++++
arch/arm64/Kconfig | 14 ++
arch/arm64/include/asm/alternative.h | 4 +-
arch/arm64/include/asm/arch_gicv3.h | 32 +++
arch/arm64/include/asm/assembler.h | 10 +-
arch/arm64/include/asm/cpucaps.h | 3 +-
arch/arm64/include/asm/cpufeature.h | 10 +
arch/arm64/include/asm/daifflags.h | 20 +-
arch/arm64/include/asm/efi.h | 3 +-
arch/arm64/include/asm/irqflags.h | 132 ++++++++++---
arch/arm64/include/asm/kvm_host.h | 12 ++
arch/arm64/include/asm/processor.h | 3 +
arch/arm64/include/asm/ptrace.h | 20 +-
arch/arm64/kernel/alternative.c | 60 +++++-
arch/arm64/kernel/asm-offsets.c | 1 +
arch/arm64/kernel/cpufeature.c | 42 +++-
arch/arm64/kernel/entry.S | 40 ++++
arch/arm64/kernel/process.c | 6 +
arch/arm64/kernel/smp.c | 34 ++++
arch/arm64/kernel/traps.c | 8 +-
arch/arm64/kvm/hyp/switch.c | 16 ++
arch/arm64/mm/proc.S | 18 ++
drivers/irqchip/irq-gic-common.c | 10 +
drivers/irqchip/irq-gic-common.h | 2 +
drivers/irqchip/irq-gic-v3.c | 250 +++++++++++++++++++++---
include/linux/irqchip/arm-gic-common.h | 2 +-
28 files changed, 695 insertions(+), 101 deletions(-)
--
1.9.1