[PATCH v2 0/2] Add Synopsys High-Speed USB PHY driver for Qualcomm SoCs

[Shawn Guo]

It's based on a downstream driver from Sriharsha Allenki <sallenki@xxxxxxxxxxxxxx>
that uses USB phy framework, and gets rewrote to adpot generic phy
framework together with quite some cleanups.

Changes for v2:
 - Add a pointer to phy/phy-bindings.txt for property #phy-cells.
 - Roll back voltage settings in case function
   qcom_snps_hsphy_config_regulators() fails in the middle.
 - Add a comment for init-seq tuple which consists of 3 numbers.
 - Sort include headers alphabetically.
 - Sort register definitions in order of offset.

Shawn Guo (1):
  phy: qualcomm: Add Synopsys High-Speed USB PHY driver

Sriharsha Allenki (1):
  dt-bindings: phy: Add Qualcomm Synopsys High-Speed USB PHY binding

 .../phy/qcom,snps-28nm-usb-hs-phy.txt         | 101 ++++
 drivers/phy/qualcomm/Kconfig                  |  10 +
 drivers/phy/qualcomm/Makefile                 |   1 +
 .../phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c  | 505 ++++++++++++++++++
 4 files changed, 617 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,snps-28nm-usb-hs-phy.txt
 create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c

-- 
2.18.0