Re: [PATCH v5 2/5] pinctrl: actions: define pad control configurtion to SoC specific
From: Parthiban Nallathambi
Date: Mon Nov 12 2018 - 11:29:12 EST
On 8/29/18 5:32 PM, Manivannan Sadhasivam wrote:
On Wed, Aug 29, 2018 at 10:24:10AM +0200, Saravanan Sekar wrote:
pad control for s900 and s700 are differs in number of
pull control configuraions
s900 has 4 pull controls - high impedence, pull up, pull down, repeater
s700, s500 has 2 pull controls - pull up and pull down
so pad control configuration has to SoC specific, moved out from pinctrl
common to s700, s900 specific.
This patch is not adding anything for S700 so no need to mention it in
last line.
Agreed!
Signed-off-by: Parthiban Nallathambi <pn@xxxxxxx>
Signed-off-by: Saravanan Sekar <sravanhome@xxxxxxxxx>
---
drivers/pinctrl/actions/pinctrl-owl.c | 64 +++++----------------------------
drivers/pinctrl/actions/pinctrl-owl.h | 13 ++++---
drivers/pinctrl/actions/pinctrl-s900.c | 66 +++++++++++++++++++++++++++++++++-
3 files changed, 79 insertions(+), 64 deletions(-)
diff --git a/drivers/pinctrl/actions/pinctrl-owl.c b/drivers/pinctrl/actions/pinctrl-owl.c
index 9d18c02f192b..cc242d6a47c3 100644
--- a/drivers/pinctrl/actions/pinctrl-owl.c
+++ b/drivers/pinctrl/actions/pinctrl-owl.c
@@ -246,60 +246,6 @@ static int owl_pad_pinconf_reg(const struct owl_padinfo *info,
return 0;
}
-static int owl_pad_pinconf_arg2val(const struct owl_padinfo *info,
- unsigned int param,
- u32 *arg)
-{
- switch (param) {
- case PIN_CONFIG_BIAS_BUS_HOLD:
- *arg = OWL_PINCONF_PULL_HOLD;
- break;
- case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
- *arg = OWL_PINCONF_PULL_HIZ;
- break;
- case PIN_CONFIG_BIAS_PULL_DOWN:
- *arg = OWL_PINCONF_PULL_DOWN;
- break;
- case PIN_CONFIG_BIAS_PULL_UP:
- *arg = OWL_PINCONF_PULL_UP;
- break;
- case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
- *arg = (*arg >= 1 ? 1 : 0);
- break;
- default:
- return -ENOTSUPP;
- }
-
- return 0;
-}
-
-static int owl_pad_pinconf_val2arg(const struct owl_padinfo *padinfo,
- unsigned int param,
- u32 *arg)
-{
- switch (param) {
- case PIN_CONFIG_BIAS_BUS_HOLD:
- *arg = *arg == OWL_PINCONF_PULL_HOLD;
- break;
- case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
- *arg = *arg == OWL_PINCONF_PULL_HIZ;
- break;
- case PIN_CONFIG_BIAS_PULL_DOWN:
- *arg = *arg == OWL_PINCONF_PULL_DOWN;
- break;
- case PIN_CONFIG_BIAS_PULL_UP:
- *arg = *arg == OWL_PINCONF_PULL_UP;
- break;
- case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
- *arg = *arg == 1;
- break;
- default:
- return -ENOTSUPP;
- }
-
- return 0;
-}
-
static int owl_pin_config_get(struct pinctrl_dev *pctrldev,
unsigned int pin,
unsigned long *config)
@@ -318,7 +264,10 @@ static int owl_pin_config_get(struct pinctrl_dev *pctrldev,
arg = owl_read_field(pctrl, reg, bit, width);
- ret = owl_pad_pinconf_val2arg(info, param, &arg);
+ if (!pctrl->soc->padctl_val2arg)
+ return -ENOTSUPP;
+
+ ret = pctrl->soc->padctl_val2arg(info, param, &arg);
if (ret)
return ret;
@@ -349,7 +298,10 @@ static int owl_pin_config_set(struct pinctrl_dev *pctrldev,
if (ret)
return ret;
- ret = owl_pad_pinconf_arg2val(info, param, &arg);
+ if (!pctrl->soc->padctl_arg2val)
+ return -ENOTSUPP;
+
+ ret = pctrl->soc->padctl_arg2val(info, param, &arg);
if (ret)
return ret;
diff --git a/drivers/pinctrl/actions/pinctrl-owl.h b/drivers/pinctrl/actions/pinctrl-owl.h
index 31cc33d7c4a5..dae2e8363fd5 100644
--- a/drivers/pinctrl/actions/pinctrl-owl.h
+++ b/drivers/pinctrl/actions/pinctrl-owl.h
@@ -145,13 +145,6 @@
.shared_ctl_offset = _share, \
}
-enum owl_pinconf_pull {
- OWL_PINCONF_PULL_HIZ,
- OWL_PINCONF_PULL_DOWN,
- OWL_PINCONF_PULL_UP,
- OWL_PINCONF_PULL_HOLD,
-};
-
enum owl_pinconf_drv {
OWL_PINCONF_DRV_2MA,
OWL_PINCONF_DRV_4MA,
@@ -305,6 +298,12 @@ struct owl_pinctrl_soc_data {
unsigned int ngpios;
const struct owl_gpio_port *ports;
unsigned int nports;
+ int (*padctl_val2arg)(const struct owl_padinfo *padinfo,
+ unsigned int param,
+ u32 *arg);
+ int (*padctl_arg2val)(const struct owl_padinfo *info,
+ unsigned int param,
+ u32 *arg);
};
int owl_pinctrl_probe(struct platform_device *pdev,
diff --git a/drivers/pinctrl/actions/pinctrl-s900.c b/drivers/pinctrl/actions/pinctrl-s900.c
index 0597009d8369..2e19fecbe5e9 100644
--- a/drivers/pinctrl/actions/pinctrl-s900.c
+++ b/drivers/pinctrl/actions/pinctrl-s900.c
@@ -13,6 +13,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf-generic.h>
#include "pinctrl-owl.h"
/* Pinctrl registers offset */
@@ -1717,6 +1718,67 @@ static const struct owl_gpio_port s900_gpio_ports[] = {
OWL_GPIO_PORT(F, 0x00F0, 8, 0x0, 0x4, 0x8, 0x460, 0x140, 0x144, 0x178, 0)
};
+enum owl_pinconf_pull {
Since this enum is SoC specific, it could be s900_pinconf_pull.
Agreed!
Thanks,
Parthi
Regards,
Mani
+ OWL_PINCONF_PULL_HIZ,
+ OWL_PINCONF_PULL_DOWN,
+ OWL_PINCONF_PULL_UP,
+ OWL_PINCONF_PULL_HOLD,
+};
+
+static int s900_pad_pinconf_arg2val(const struct owl_padinfo *info,
+ unsigned int param,
+ u32 *arg)
+{
+ switch (param) {
+ case PIN_CONFIG_BIAS_BUS_HOLD:
+ *arg = OWL_PINCONF_PULL_HOLD;
+ break;
+ case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+ *arg = OWL_PINCONF_PULL_HIZ;
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ *arg = OWL_PINCONF_PULL_DOWN;
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ *arg = OWL_PINCONF_PULL_UP;
+ break;
+ case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+ *arg = (*arg >= 1 ? 1 : 0);
+ break;
+ default:
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static int s900_pad_pinconf_val2arg(const struct owl_padinfo *padinfo,
+ unsigned int param,
+ u32 *arg)
+{
+ switch (param) {
+ case PIN_CONFIG_BIAS_BUS_HOLD:
+ *arg = *arg == OWL_PINCONF_PULL_HOLD;
+ break;
+ case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
+ *arg = *arg == OWL_PINCONF_PULL_HIZ;
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ *arg = *arg == OWL_PINCONF_PULL_DOWN;
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ *arg = *arg == OWL_PINCONF_PULL_UP;
+ break;
+ case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+ *arg = *arg == 1;
+ break;
+ default:
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
static struct owl_pinctrl_soc_data s900_pinctrl_data = {
.padinfo = s900_padinfo,
.pins = (const struct pinctrl_pin_desc *)s900_pads,
@@ -1727,7 +1789,9 @@ static struct owl_pinctrl_soc_data s900_pinctrl_data = {
.ngroups = ARRAY_SIZE(s900_groups),
.ngpios = NUM_GPIOS,
.ports = s900_gpio_ports,
- .nports = ARRAY_SIZE(s900_gpio_ports)
+ .nports = ARRAY_SIZE(s900_gpio_ports),
+ .padctl_arg2val = s900_pad_pinconf_arg2val,
+ .padctl_val2arg = s900_pad_pinconf_val2arg,
};
static int s900_pinctrl_probe(struct platform_device *pdev)
--
2.14.4
--
Thanks,
Parthiban N
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-22 Fax: (+49)-8142-66989-80 Email: pn@xxxxxxx