[PATCH] hwmon (ina3221) Add mutex lock to shunt nodes

[Nicolin Chen]

The shunt resistor values are used to calculate shunt voltages
and currents. As a part of sysfs nodes, it would be better to
get protected with the same mutex too as other sysfs ABI nodes,
although this is not very critical because the mutex was added
to mainly protect register access.

So this patch adds the mutex lock to protect the shunt node.

Signed-off-by: Nicolin Chen <nicoleotsuka@xxxxxxxxx>
---
 drivers/hwmon/ina3221.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c
index 86281afd2619..f7a09ab6c440 100644
--- a/drivers/hwmon/ina3221.c
+++ b/drivers/hwmon/ina3221.c
@@ -532,8 +532,15 @@ static ssize_t ina3221_show_shunt(struct device *dev,
 	struct ina3221_data *ina = dev_get_drvdata(dev);
 	unsigned int channel = sd_attr->index;
 	struct ina3221_input *input = &ina->inputs[channel];
+	ssize_t ret;
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", input->shunt_resistor);
+	mutex_lock(&ina->lock);
+
+	ret = snprintf(buf, PAGE_SIZE, "%d\n", input->shunt_resistor);
+
+	mutex_unlock(&ina->lock);
+
+	return ret;
 }
 
 static ssize_t ina3221_set_shunt(struct device *dev,
@@ -547,14 +554,20 @@ static ssize_t ina3221_set_shunt(struct device *dev,
 	int val;
 	int ret;
 
+	mutex_lock(&ina->lock);
+
 	ret = kstrtoint(buf, 0, &val);
-	if (ret)
+	if (ret) {
+		mutex_unlock(&ina->lock);
 		return ret;
+	}
 
 	val = clamp_val(val, 1, INT_MAX);
 
 	input->shunt_resistor = val;
 
+	mutex_unlock(&ina->lock);
+
 	return count;
 }
 
-- 
2.17.1