[PATCH] media: camss: Take in account sensor skip frames

From: Todor Tomov
Date: Tue Nov 13 2018 - 09:03:22 EST


When streaming is starting ask the sensor for its skip frames value.
Max supported frame skip is 29 frames, so clip it if it is higher.

Signed-off-by: Todor Tomov <todor.tomov@xxxxxxxxxx>
---
drivers/media/platform/qcom/camss/camss-vfe.c | 23 ++++++++++++++++++-----
drivers/media/platform/qcom/camss/camss.c | 2 +-
drivers/media/platform/qcom/camss/camss.h | 1 +
3 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index ed6a557..a8c542fa 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -37,9 +37,9 @@
/* VFE halt timeout */
#define VFE_HALT_TIMEOUT_MS 100
/* Max number of frame drop updates per frame */
-#define VFE_FRAME_DROP_UPDATES 5
-/* Frame drop value. NOTE: VAL + UPDATES should not exceed 31 */
-#define VFE_FRAME_DROP_VAL 20
+#define VFE_FRAME_DROP_UPDATES 2
+/* Frame drop value. VAL + UPDATES - 1 should not exceed 31 */
+#define VFE_FRAME_DROP_VAL 30

#define VFE_NEXT_SOF_MS 500

@@ -659,7 +659,9 @@ static int vfe_enable_output(struct vfe_line *line)
struct vfe_device *vfe = to_vfe(line);
struct vfe_output *output = &line->output;
const struct vfe_hw_ops *ops = vfe->ops;
+ struct media_entity *sensor;
unsigned long flags;
+ unsigned int frame_skip = 0;
unsigned int i;
u16 ub_size;

@@ -667,6 +669,17 @@ static int vfe_enable_output(struct vfe_line *line)
if (!ub_size)
return -EINVAL;

+ sensor = camss_find_sensor(&line->subdev.entity);
+ if (sensor) {
+ struct v4l2_subdev *subdev =
+ media_entity_to_v4l2_subdev(sensor);
+
+ v4l2_subdev_call(subdev, sensor, g_skip_frames, &frame_skip);
+ /* Max frame skip is 29 frames */
+ if (frame_skip > VFE_FRAME_DROP_VAL - 1)
+ frame_skip = VFE_FRAME_DROP_VAL - 1;
+ }
+
spin_lock_irqsave(&vfe->output_lock, flags);

ops->reg_update_clear(vfe, line->id);
@@ -695,10 +708,10 @@ static int vfe_enable_output(struct vfe_line *line)

switch (output->state) {
case VFE_OUTPUT_SINGLE:
- vfe_output_frame_drop(vfe, output, 1);
+ vfe_output_frame_drop(vfe, output, 1 << frame_skip);
break;
case VFE_OUTPUT_CONTINUOUS:
- vfe_output_frame_drop(vfe, output, 3);
+ vfe_output_frame_drop(vfe, output, 3 << frame_skip);
break;
default:
vfe_output_frame_drop(vfe, output, 0);
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 669615f..b307f6e 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -346,7 +346,7 @@ void camss_disable_clocks(int nclocks, struct camss_clock *clock)
*
* Return a pointer to sensor media entity or NULL if not found
*/
-static struct media_entity *camss_find_sensor(struct media_entity *entity)
+struct media_entity *camss_find_sensor(struct media_entity *entity)
{
struct media_pad *pad;

diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index 418996d..c488f63 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -107,6 +107,7 @@ void camss_add_clock_margin(u64 *rate);
int camss_enable_clocks(int nclocks, struct camss_clock *clock,
struct device *dev);
void camss_disable_clocks(int nclocks, struct camss_clock *clock);
+struct media_entity *camss_find_sensor(struct media_entity *entity);
int camss_get_pixel_clock(struct media_entity *entity, u32 *pixel_clock);
int camss_pm_domain_on(struct camss *camss, int id);
void camss_pm_domain_off(struct camss *camss, int id);
--
2.7.4