Re: [PATCH v3 1/4] staging: iio: ad7816: Switch to the gpio descriptor interface
From: Nishad Kamdar
Date: Wed Nov 14 2018 - 12:06:20 EST
On Sun, Nov 11, 2018 at 12:31:54PM +0000, Jonathan Cameron wrote:
> On Sun, 11 Nov 2018 12:24:05 +0000
> Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
>
> > On Fri, 9 Nov 2018 13:05:17 +0530
> > Nishad Kamdar <nishadkamdar@xxxxxxxxx> wrote:
> >
> > > Use the gpiod interface for rdwr_pin, convert_pin and busy_pin
> > > instead of the deprecated old non-descriptor interface.
> > >
> > > Signed-off-by: Nishad Kamdar <nishadkamdar@xxxxxxxxx>
> > Applied to the togreg branch of iio.git and pushed out as testing
> > for the autobuilders to play with it.
> Actually no it isn't, because I applied the previous version back in
> October. Please avoid resending patches that have already been applied.
> It gets very confusing!
>
> Jonathan
>
Sorry about that. I'll keep that in mind.
Thanks for the review.
regards,
Nishad
>
> >
> > Thanks,
> >
> > Jonathan
> >
> > > ---
> > > drivers/staging/iio/adc/ad7816.c | 80 ++++++++++++++------------------
> > > 1 file changed, 34 insertions(+), 46 deletions(-)
> > >
> > > diff --git a/drivers/staging/iio/adc/ad7816.c b/drivers/staging/iio/adc/ad7816.c
> > > index bf76a8620bdb..12c4e0ab4713 100644
> > > --- a/drivers/staging/iio/adc/ad7816.c
> > > +++ b/drivers/staging/iio/adc/ad7816.c
> > > @@ -7,7 +7,7 @@
> > > */
> > >
> > > #include <linux/interrupt.h>
> > > -#include <linux/gpio.h>
> > > +#include <linux/gpio/consumer.h>
> > > #include <linux/device.h>
> > > #include <linux/kernel.h>
> > > #include <linux/slab.h>
> > > @@ -44,9 +44,9 @@
> > >
> > > struct ad7816_chip_info {
> > > struct spi_device *spi_dev;
> > > - u16 rdwr_pin;
> > > - u16 convert_pin;
> > > - u16 busy_pin;
> > > + struct gpio_desc *rdwr_pin;
> > > + struct gpio_desc *convert_pin;
> > > + struct gpio_desc *busy_pin;
> > > u8 oti_data[AD7816_CS_MAX + 1];
> > > u8 channel_id; /* 0 always be temperature */
> > > u8 mode;
> > > @@ -61,28 +61,28 @@ static int ad7816_spi_read(struct ad7816_chip_info *chip, u16 *data)
> > > int ret = 0;
> > > __be16 buf;
> > >
> > > - gpio_set_value(chip->rdwr_pin, 1);
> > > - gpio_set_value(chip->rdwr_pin, 0);
> > > + gpiod_set_value(chip->rdwr_pin, 1);
> > > + gpiod_set_value(chip->rdwr_pin, 0);
> > > ret = spi_write(spi_dev, &chip->channel_id, sizeof(chip->channel_id));
> > > if (ret < 0) {
> > > dev_err(&spi_dev->dev, "SPI channel setting error\n");
> > > return ret;
> > > }
> > > - gpio_set_value(chip->rdwr_pin, 1);
> > > + gpiod_set_value(chip->rdwr_pin, 1);
> > >
> > > if (chip->mode == AD7816_PD) { /* operating mode 2 */
> > > - gpio_set_value(chip->convert_pin, 1);
> > > - gpio_set_value(chip->convert_pin, 0);
> > > + gpiod_set_value(chip->convert_pin, 1);
> > > + gpiod_set_value(chip->convert_pin, 0);
> > > } else { /* operating mode 1 */
> > > - gpio_set_value(chip->convert_pin, 0);
> > > - gpio_set_value(chip->convert_pin, 1);
> > > + gpiod_set_value(chip->convert_pin, 0);
> > > + gpiod_set_value(chip->convert_pin, 1);
> > > }
> > >
> > > - while (gpio_get_value(chip->busy_pin))
> > > + while (gpiod_get_value(chip->busy_pin))
> > > cpu_relax();
> > >
> > > - gpio_set_value(chip->rdwr_pin, 0);
> > > - gpio_set_value(chip->rdwr_pin, 1);
> > > + gpiod_set_value(chip->rdwr_pin, 0);
> > > + gpiod_set_value(chip->rdwr_pin, 1);
> > > ret = spi_read(spi_dev, &buf, sizeof(*data));
> > > if (ret < 0) {
> > > dev_err(&spi_dev->dev, "SPI data read error\n");
> > > @@ -99,8 +99,8 @@ static int ad7816_spi_write(struct ad7816_chip_info *chip, u8 data)
> > > struct spi_device *spi_dev = chip->spi_dev;
> > > int ret = 0;
> > >
> > > - gpio_set_value(chip->rdwr_pin, 1);
> > > - gpio_set_value(chip->rdwr_pin, 0);
> > > + gpiod_set_value(chip->rdwr_pin, 1);
> > > + gpiod_set_value(chip->rdwr_pin, 0);
> > > ret = spi_write(spi_dev, &data, sizeof(data));
> > > if (ret < 0)
> > > dev_err(&spi_dev->dev, "SPI oti data write error\n");
> > > @@ -129,10 +129,10 @@ static ssize_t ad7816_store_mode(struct device *dev,
> > > struct ad7816_chip_info *chip = iio_priv(indio_dev);
> > >
> > > if (strcmp(buf, "full")) {
> > > - gpio_set_value(chip->rdwr_pin, 1);
> > > + gpiod_set_value(chip->rdwr_pin, 1);
> > > chip->mode = AD7816_FULL;
> > > } else {
> > > - gpio_set_value(chip->rdwr_pin, 0);
> > > + gpiod_set_value(chip->rdwr_pin, 0);
> > > chip->mode = AD7816_PD;
> > > }
> > >
> > > @@ -345,15 +345,9 @@ static int ad7816_probe(struct spi_device *spi_dev)
> > > {
> > > struct ad7816_chip_info *chip;
> > > struct iio_dev *indio_dev;
> > > - unsigned short *pins = dev_get_platdata(&spi_dev->dev);
> > > int ret = 0;
> > > int i;
> > >
> > > - if (!pins) {
> > > - dev_err(&spi_dev->dev, "No necessary GPIO platform data.\n");
> > > - return -EINVAL;
> > > - }
> > > -
> > > indio_dev = devm_iio_device_alloc(&spi_dev->dev, sizeof(*chip));
> > > if (!indio_dev)
> > > return -ENOMEM;
> > > @@ -364,34 +358,28 @@ static int ad7816_probe(struct spi_device *spi_dev)
> > > chip->spi_dev = spi_dev;
> > > for (i = 0; i <= AD7816_CS_MAX; i++)
> > > chip->oti_data[i] = 203;
> > > - chip->rdwr_pin = pins[0];
> > > - chip->convert_pin = pins[1];
> > > - chip->busy_pin = pins[2];
> > > -
> > > - ret = devm_gpio_request(&spi_dev->dev, chip->rdwr_pin,
> > > - spi_get_device_id(spi_dev)->name);
> > > - if (ret) {
> > > - dev_err(&spi_dev->dev, "Fail to request rdwr gpio PIN %d.\n",
> > > - chip->rdwr_pin);
> > > +
> > > + chip->rdwr_pin = devm_gpiod_get(&spi_dev->dev, "rdwr", GPIOD_IN);
> > > + if (IS_ERR(chip->rdwr_pin)) {
> > > + ret = PTR_ERR(chip->rdwr_pin);
> > > + dev_err(&spi_dev->dev, "Failed to request rdwr GPIO: %d\n",
> > > + ret);
> > > return ret;
> > > }
> > > - gpio_direction_input(chip->rdwr_pin);
> > > - ret = devm_gpio_request(&spi_dev->dev, chip->convert_pin,
> > > - spi_get_device_id(spi_dev)->name);
> > > - if (ret) {
> > > - dev_err(&spi_dev->dev, "Fail to request convert gpio PIN %d.\n",
> > > - chip->convert_pin);
> > > + chip->convert_pin = devm_gpiod_get(&spi_dev->dev, "convert", GPIOD_IN);
> > > + if (IS_ERR(chip->convert_pin)) {
> > > + ret = PTR_ERR(chip->convert_pin);
> > > + dev_err(&spi_dev->dev, "Failed to request convert GPIO: %d\n",
> > > + ret);
> > > return ret;
> > > }
> > > - gpio_direction_input(chip->convert_pin);
> > > - ret = devm_gpio_request(&spi_dev->dev, chip->busy_pin,
> > > - spi_get_device_id(spi_dev)->name);
> > > - if (ret) {
> > > - dev_err(&spi_dev->dev, "Fail to request busy gpio PIN %d.\n",
> > > - chip->busy_pin);
> > > + chip->busy_pin = devm_gpiod_get(&spi_dev->dev, "busy", GPIOD_IN);
> > > + if (IS_ERR(chip->busy_pin)) {
> > > + ret = PTR_ERR(chip->busy_pin);
> > > + dev_err(&spi_dev->dev, "Failed to request busy GPIO: %d\n",
> > > + ret);
> > > return ret;
> > > }
> > > - gpio_direction_input(chip->busy_pin);
> > >
> > > indio_dev->name = spi_get_device_id(spi_dev)->name;
> > > indio_dev->dev.parent = &spi_dev->dev;
> >
>