Re: [PATCH 2/2] drm/msm/dsi: Get PHY ref clock from the DT

[Matthias Kaehlcke]

On Thu, Nov 08, 2018 at 02:04:31PM -0800, Doug Anderson wrote:
> Hi,
> 
> On Fri, Nov 2, 2018 at 2:45 PM Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote:
> >
> > Get the PHY ref clock from the device tree instead of hardcoding
> > its name and rate.
> >
> > Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 11 ++++++++++-
> >  1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
> > index 4c03f0b7343ed..1016eb50df8f5 100644
> > --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
> > +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
> > @@ -91,6 +91,8 @@ struct dsi_pll_10nm {
> >         void __iomem *phy_cmn_mmio;
> >         void __iomem *mmio;
> >
> > +       struct clk *vco_ref_clk;
> > +
> >         u64 vco_ref_clk_rate;
> >         u64 vco_current_rate;
> >
> > @@ -630,7 +632,8 @@ static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm)
> >         char clk_name[32], parent[32], vco_name[32];
> >         char parent2[32], parent3[32], parent4[32];
> >         struct clk_init_data vco_init = {
> > -               .parent_names = (const char *[]){ "xo" },
> > +               .parent_names = (const char *[]){
> > +                       __clk_get_name(pll_10nm->vco_ref_clk) },
> >                 .num_parents = 1,
> >                 .name = vco_name,
> >                 .flags = CLK_IGNORE_UNUSED,
> > @@ -786,6 +789,12 @@ struct msm_dsi_pll *msm_dsi_pll_10nm_init(struct platform_device *pdev, int id)
> >         pll_10nm->id = id;
> >         pll_10nm_list[id] = pll_10nm;
> >
> > +       pll_10nm->vco_ref_clk = devm_clk_get(&pdev->dev, "ref");
> > +       if (IS_ERR(pll_10nm->vco_ref_clk)) {
> > +               dev_err(&pdev->dev, "couldn't get 'ref' clock\n");
> > +               return (void *)pll_10nm->vco_ref_clk;
> > +       }
> 
> So, ummmm.  Can you follow the same pattern for all the other clocks
> in this file too?  All parents should get their name based on
> references in the device tree.
> 
> It turns out that right now we have a mismatch because
> "drivers/clk/qcom/dispcc-sdm845.c" calls "dsi0pllbyte"
> "dsi0_phy_pll_out_byteclk" and calls "dsi0pll"
> "dsi0_phy_pll_out_dsiclk".  We might want to change the names in
> dispcc-sdm845.c, but it wouldn't matter if we simply didn't hardcode
> them here.

Hm, I understand the problem, but not quite what you mean with 'follow
the same pattern'. The VCO ref clock is an 'external'/existing clock,
hence it can be specificed in the DT and obtained with
_clk_get(). However the clocks you mention above are 'created' by the
PHY driver, so we could only specify their names in the DT, not sure
if that's what you are suggesting. I guess 'clock-output-names' could
be used, though it isn't really useful to describe the names in a
clock tree. If you still think this should be done please share how
you envision the DT entries to look.

Cheers

Matthias