Re: [PATCH] usb: hub: add I/O error retry & reset routine

[Alan Stern]

On Thu, 15 Nov 2018, Nicolas Saenz Julienne wrote:

> An URB submission error in the HUB's endpoint completion function
> renders the whole HUB device unresponsive. This patch introduces a
> routine that retries the submission for 1s to then, as a last resort,
> reset the whole device.
> 
> The implementation is based on usbhid/hid_core.c's, which implements the
> same functionality. It was tested with the help of BCC's error injection
> tool (inject.py).
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>

Why do you think this is needed?  Are you experiencing these 
sorts of URB submission errors?

Why do you handle only errors during submission but not during
completion?  And if you keep on getting errors during submission, why
would resetting the hub make any difference?

The patch doesn't delete the io_retry timer when the hub is removed.

Alan Stern


> ---
>  drivers/usb/core/hub.c | 43 +++++++++++++++++++++++++++++++++++++++++-
>  drivers/usb/core/hub.h |  3 +++
>  2 files changed, 45 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index d9bd7576786a..1447bdba59ec 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -607,6 +607,44 @@ static int hub_port_status(struct usb_hub *hub, int port1,
>  				   status, change, NULL);
>  }
>  
> +static void hub_io_error(struct usb_hub *hub)
> +{
> +	/*
> +	 * If it has been a while since the last error, we'll assume
> +	 * this a brand new error and reset the retry timeout.
> +	 */
> +	if (time_after(jiffies, hub->stop_retry + HZ/2))
> +		hub->retry_delay = 0;
> +
> +	/* When an error occurs, retry at increasing intervals */
> +	if (hub->retry_delay == 0) {
> +		hub->retry_delay = 13;	/* Then 26, 52, 104, 104, ... */
> +		hub->stop_retry = jiffies + msecs_to_jiffies(1000);
> +	} else if (hub->retry_delay < 100)
> +		hub->retry_delay *= 2;
> +
> +	if (time_after(jiffies, hub->stop_retry)) {
> +		/* Retries failed, so do a port reset */
> +		usb_queue_reset_device(to_usb_interface(hub->intfdev));
> +		return;
> +	}
> +
> +	mod_timer(&hub->io_retry,
> +			jiffies + msecs_to_jiffies(hub->retry_delay));
> +}
> +
> +static void hub_retry_timeout(struct timer_list *t)
> +{
> +	struct usb_hub *hub = from_timer(hub, t, io_retry);
> +
> +	if (hub->disconnected || hub->quiescing)
> +		return;
> +
> +	dev_err(hub->intfdev, "retrying int urb\n");
> +	if (usb_submit_urb(hub->urb, GFP_ATOMIC))
> +		hub_io_error(hub);
> +}
> +
>  static void kick_hub_wq(struct usb_hub *hub)
>  {
>  	struct usb_interface *intf;
> @@ -713,8 +751,10 @@ static void hub_irq(struct urb *urb)
>  		return;
>  
>  	status = usb_submit_urb(hub->urb, GFP_ATOMIC);
> -	if (status != 0 && status != -ENODEV && status != -EPERM)
> +	if (status != 0 && status != -ENODEV && status != -EPERM) {
>  		dev_err(hub->intfdev, "resubmit --> %d\n", status);
> +		hub_io_error(hub);
> +	}
>  }
>  
>  /* USB 2.0 spec Section 11.24.2.3 */
> @@ -1800,6 +1840,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
>  	INIT_DELAYED_WORK(&hub->leds, led_work);
>  	INIT_DELAYED_WORK(&hub->init_work, NULL);
>  	INIT_WORK(&hub->events, hub_event);
> +	timer_setup(&hub->io_retry, hub_retry_timeout, 0);
>  	usb_get_intf(intf);
>  	usb_get_dev(hdev);
>  
> diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
> index 4accfb63f7dc..7dbd19c2c8d9 100644
> --- a/drivers/usb/core/hub.h
> +++ b/drivers/usb/core/hub.h
> @@ -69,6 +69,9 @@ struct usb_hub {
>  	struct delayed_work	leds;
>  	struct delayed_work	init_work;
>  	struct work_struct      events;
> +	struct timer_list	io_retry;
> +	unsigned long		stop_retry;
> +	unsigned int		retry_delay;
>  	struct usb_port		**ports;
>  };
>  
>