Re: [PATCH v4 0/3] Add driver for Synopsys DesignWare I3C master IP

[Boris Brezillon]

On Tue, 13 Nov 2018 14:09:50 +0000
Vitor Soares <vitor.soares@xxxxxxxxxxxx> wrote:

> This patch series is a proposal for the I3C master driver for Synopsys IP.
> This patch is to be applied on top of I3C subsystem RFC V10 submitted by
> Boris Brezillon.
> 
> Supported features:
>   Regular CCC commands.
>   I3C private transfers.
>   I2C transfers.
> 
> Missing functionalities:
>   Support DMA interface.
>   Support for I3C_BUS_MODE_MIXED_SLOW.
>   Hot-join.
>   IBI.

Patchset queued to i3c/next.

Thanks,

Boris

> 
> Main change between v3 and v4:
> - Minor fixes. They are described in each patch
> 
> Main change between v2 and v3:
> - Minor fixes. They are described in each patch
> 
> Main change between v1 and v2:
> - Add controller version on dt-binding
> - The driver now calls writesl/readsl() instead readl/writel
> - Rename some variables in the driver
> 
> Vitor Soares (3):
>   i3c: master: Add driver for Synopsys DesignWare IP
>   dt-binding: i3c: Document Synopsys DesignWare I3C
>   MAINTAINERS: Add myself as the dw-i3c-master module maintainer
> 
>  .../devicetree/bindings/i3c/snps,dw-i3c-master.txt |   41 +
>  MAINTAINERS                                        |    6 +
>  drivers/i3c/master/Kconfig                         |   14 +
>  drivers/i3c/master/Makefile                        |    1 +
>  drivers/i3c/master/dw-i3c-master.c                 | 1216 ++++++++++++++++++++
>  5 files changed, 1278 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
>  create mode 100644 drivers/i3c/master/dw-i3c-master.c
>