Re: Applied "regulator: wm8994: Pass descriptor instead of GPIO number" to the regulator tree

[Charles Keepax]

On Tue, Nov 20, 2018 at 02:43:32PM +0100, Marek Szyprowski wrote:
> On 2018-05-17 18:41, Mark Brown wrote:
> > Subject: [PATCH] regulator: wm8994: Pass descriptor instead of GPIO number
> 
> This patch causes following kernel warning on Samsung Exynos4412 based
> Trats2 board:
> 
> wm8994 4-001a: Failed to get supply 'DBVDD1': -517
> wm8994 4-001a: Failed to get supplies: -517

How is the wm8994 being registered on this board? I am having
difficulty finding a device tree or a board file that relates to
the board and includes the wm8994.

> > @@ -203,6 +203,18 @@ static const struct i2c_board_info wm1277_devs[] = {
> >  	{ I2C_BOARD_INFO("wm8958", 0x1a),  /* WM8958 is the superset */
> >  	  .platform_data = &wm8994_pdata,
> >  	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
> > +	  .dev_name = "wm8958",
> > +	},
> > +};
> > +
> > +static struct gpiod_lookup_table wm8994_gpiod_table = {
> > +	.dev_id = "i2c-wm8958", /* I2C device name */
> > +	.table = {
> > +		GPIO_LOOKUP("GPION", 6,
> > +			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
> > +		GPIO_LOOKUP("GPION", 4,
> > +			    "wlf,ldo2ena", GPIO_ACTIVE_HIGH),
> > +		{ },
> >  	},
> >  };

If its being done through a board file I guess you will need the
equivalent of this.

Thanks,
Charles