Re: Applied "regulator: wm8994: Pass descriptor instead of GPIO number" to the regulator tree

[Marek Szyprowski]

Hi Charles,

On 2018-11-20 15:47, Charles Keepax wrote:
> On Tue, Nov 20, 2018 at 02:43:32PM +0100, Marek Szyprowski wrote:
>> On 2018-05-17 18:41, Mark Brown wrote:
>>> Subject: [PATCH] regulator: wm8994: Pass descriptor instead of GPIO number
>> This patch causes following kernel warning on Samsung Exynos4412 based
>> Trats2 board:
>>
>> wm8994 4-001a: Failed to get supply 'DBVDD1': -517
>> wm8994 4-001a: Failed to get supplies: -517
> How is the wm8994 being registered on this board? I am having
> difficulty finding a device tree or a board file that relates to
> the board and includes the wm8994.


Please check arch/arm/boot/dts/exynos4412-trats2.dts details. The I2C device
is defined in exynos4412-midas.dtsi, it uses "wlf,wm1811" compatible.


>>> @@ -203,6 +203,18 @@ static const struct i2c_board_info wm1277_devs[] = {
>>>  	{ I2C_BOARD_INFO("wm8958", 0x1a),  /* WM8958 is the superset */
>>>  	  .platform_data = &wm8994_pdata,
>>>  	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
>>> +	  .dev_name = "wm8958",
>>> +	},
>>> +};
>>> +
>>> +static struct gpiod_lookup_table wm8994_gpiod_table = {
>>> +	.dev_id = "i2c-wm8958", /* I2C device name */
>>> +	.table = {
>>> +		GPIO_LOOKUP("GPION", 6,
>>> +			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
>>> +		GPIO_LOOKUP("GPION", 4,
>>> +			    "wlf,ldo2ena", GPIO_ACTIVE_HIGH),
>>> +		{ },
>>>  	},
>>>  };
> If its being done through a board file I guess you will need the
> equivalent of this.


No board file, everything in DT.


Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland