[PATCH v2 7/7] zram: writeback throttle
From: Minchan Kim
Date: Mon Nov 26 2018 - 03:28:44 EST
On small memory system, there are lots of write IO so if we use
flash device as swap, there would be serious flash wearout.
To overcome the problem, system developers need to design write
limitation strategy to guarantee flash health for entire product life.
This patch creates a new konb "writeback_limit" on zram. With that,
if current writeback IO count(/sys/block/zramX/io_stat) excceds
the limitation, zram stops further writeback until admin can reset
the limit.
Signed-off-by: Minchan Kim <minchan@xxxxxxxxxx>
---
Documentation/ABI/testing/sysfs-block-zram | 9 +++++
Documentation/blockdev/zram.txt | 2 +
drivers/block/zram/zram_drv.c | 47 +++++++++++++++++++++-
drivers/block/zram/zram_drv.h | 2 +
4 files changed, 59 insertions(+), 1 deletion(-)
diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram
index 65fc33b2f53b..9d2339a485c8 100644
--- a/Documentation/ABI/testing/sysfs-block-zram
+++ b/Documentation/ABI/testing/sysfs-block-zram
@@ -121,3 +121,12 @@ Contact: Minchan Kim <minchan@xxxxxxxxxx>
The bd_stat file is read-only and represents backing device's
statistics (bd_count, bd_reads, bd_writes) in a format
similar to block layer statistics file format.
+
+What: /sys/block/zram<id>/writeback_limit
+Date: November 2018
+Contact: Minchan Kim <minchan@xxxxxxxxxx>
+Description:
+ The writeback_limit file is read-write and specifies the maximum
+ amount of writeback ZRAM can do. The limit could be changed
+ in run time and "0" means disable the limit.
+ No limit is the initial state.
diff --git a/Documentation/blockdev/zram.txt b/Documentation/blockdev/zram.txt
index 550bca77d322..41748d52712d 100644
--- a/Documentation/blockdev/zram.txt
+++ b/Documentation/blockdev/zram.txt
@@ -164,6 +164,8 @@ reset WO trigger device reset
mem_used_max WO reset the `mem_used_max' counter (see later)
mem_limit WO specifies the maximum amount of memory ZRAM can use
to store the compressed data
+writeback_limit WO specifies the maximum amount of write IO zram can
+ write out to backing device
max_comp_streams RW the number of possible concurrent compress operations
comp_algorithm RW show and change the compression algorithm
compact WO trigger memory compaction
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index cceaa10301e8..07c0847b7c0f 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -328,6 +328,40 @@ static ssize_t idle_store(struct device *dev,
}
#ifdef CONFIG_ZRAM_WRITEBACK
+
+static ssize_t writeback_limit_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t len)
+{
+ struct zram *zram = dev_to_zram(dev);
+ u64 val;
+ ssize_t ret = -EINVAL;
+
+ if (kstrtoull(buf, 10, &val))
+ return ret;
+
+ down_read(&zram->init_lock);
+ atomic64_set(&zram->stats.bd_wb_limit, val);
+ if (val == 0 || val > atomic64_read(&zram->stats.bd_writes))
+ zram->stop_writeback = false;
+ up_read(&zram->init_lock);
+ ret = len;
+
+ return ret;
+}
+
+static ssize_t writeback_limit_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u64 val;
+ struct zram *zram = dev_to_zram(dev);
+
+ down_read(&zram->init_lock);
+ val = atomic64_read(&zram->stats.bd_wb_limit);
+ up_read(&zram->init_lock);
+
+ return scnprintf(buf, PAGE_SIZE, "%llu\n", val);
+}
+
static void reset_bdev(struct zram *zram)
{
struct block_device *bdev;
@@ -592,6 +626,7 @@ static ssize_t writeback_store(struct device *dev,
char mode_buf[64];
unsigned long mode = -1UL;
unsigned long blk_idx = 0;
+ u64 wb_count, wb_limit;
strlcpy(mode_buf, buf, sizeof(mode_buf));
/* ignore trailing newline */
@@ -631,6 +666,11 @@ static ssize_t writeback_store(struct device *dev,
bvec.bv_len = PAGE_SIZE;
bvec.bv_offset = 0;
+ if (zram->stop_writeback) {
+ ret = -EIO;
+ break;
+ }
+
if (!blk_idx) {
blk_idx = alloc_block_bdev(zram);
if (!blk_idx) {
@@ -689,7 +729,7 @@ static ssize_t writeback_store(struct device *dev,
continue;
}
- atomic64_inc(&zram->stats.bd_writes);
+ wb_count = atomic64_inc_return(&zram->stats.bd_writes);
/*
* We released zram_slot_lock so need to check if the slot was
* changed. If there is freeing for the slot, we can catch it
@@ -713,6 +753,9 @@ static ssize_t writeback_store(struct device *dev,
zram_set_element(zram, index, blk_idx);
blk_idx = 0;
atomic64_inc(&zram->stats.pages_stored);
+ wb_limit = atomic64_read(&zram->stats.bd_wb_limit);
+ if (wb_limit != 0 && wb_count >= wb_limit)
+ zram->stop_writeback = true;
next:
zram_slot_unlock(zram, index);
}
@@ -1786,6 +1829,7 @@ static DEVICE_ATTR_RW(comp_algorithm);
#ifdef CONFIG_ZRAM_WRITEBACK
static DEVICE_ATTR_RW(backing_dev);
static DEVICE_ATTR_WO(writeback);
+static DEVICE_ATTR_RW(writeback_limit);
#endif
static struct attribute *zram_disk_attrs[] = {
@@ -1801,6 +1845,7 @@ static struct attribute *zram_disk_attrs[] = {
#ifdef CONFIG_ZRAM_WRITEBACK
&dev_attr_backing_dev.attr,
&dev_attr_writeback.attr,
+ &dev_attr_writeback_limit.attr,
#endif
&dev_attr_io_stat.attr,
&dev_attr_mm_stat.attr,
diff --git a/drivers/block/zram/zram_drv.h b/drivers/block/zram/zram_drv.h
index 7cbb134fc0c9..024044e82c9b 100644
--- a/drivers/block/zram/zram_drv.h
+++ b/drivers/block/zram/zram_drv.h
@@ -86,6 +86,7 @@ struct zram_stats {
atomic64_t bd_count; /* no. of pages in backing device */
atomic64_t bd_reads; /* no. of reads from backing device */
atomic64_t bd_writes; /* no. of writes from backing device */
+ atomic64_t bd_wb_limit; /* writeback limit of backing device */
#endif
};
@@ -113,6 +114,7 @@ struct zram {
*/
bool claim; /* Protected by bdev->bd_mutex */
struct file *backing_dev;
+ bool stop_writeback;
#ifdef CONFIG_ZRAM_WRITEBACK
struct block_device *bdev;
unsigned int old_block_size;
--
2.20.0.rc0.387.gc7a69e6b6c-goog