[PATCH] thermal/drivers/hisi: Fix bad initialization

[Daniel Lezcano]

Without this patch, the thermal driver on hi6220 and hi3660 is broken.

That is due because part of the posted patchset was merged but a small
change in the DT was dropped.

The hi6220 and hi3660 do not have an interrupt name in the DT, so
finding interrupt by name fails.

In addition, the hi3660 only defines one thermal zone in the DT and we
are trying to register two sensors assuming we have two thermal zones
in the DT.

Fix this by adding a couple of line of code to add back compatibility
with older DT and change the sensors number to 1 for the hi3660.

Fixes: 2cffaeff083f (thermal/drivers/hisi: Use platform_get_irq_byname)
Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
---
 drivers/thermal/hisi_thermal.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index c4111a9..3ab0e63 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -424,7 +424,7 @@ static int hi3660_thermal_probe(struct hisi_thermal_data *data)
 	struct platform_device *pdev = data->pdev;
 	struct device *dev = &pdev->dev;
 
-	data->nr_sensors = 2;
+	data->nr_sensors = 1;
 
 	data->sensor = devm_kzalloc(dev, sizeof(*data->sensor) *
 				    data->nr_sensors, GFP_KERNEL);
@@ -590,8 +590,13 @@ static int hisi_thermal_probe(struct platform_device *pdev)
 		}
 
 		ret = platform_get_irq_byname(pdev, sensor->irq_name);
-		if (ret < 0)
-			return ret;
+		if (ret <= 0) {
+			ret = platform_get_irq(pdev, 0);
+			if (ret <=  0) {
+				dev_err(dev, "Failed get interrupt: %d\n", ret);
+				return ret;
+			}
+		}
 
 		ret = devm_request_threaded_irq(dev, ret, NULL,
 						hisi_thermal_alarm_irq_thread,
-- 
2.7.4